OMRON CP1E-NA20DR-A PLC Based Fish Scales and Manure Cleaner Prototype
Keywords:
PLC CP1E, Nile Tilapia, Fish Scaler, Proximity SensorsAbstract
In fish removal, most of them still use manual cleaning tools whose main crust is human labor so that it can take a not fast time, especially if it is large-scale in cleaning fish and in terms of safety, it is very risky for injured hands due to manual cleaning tools. Aka it is necessary to have a fish cleaning device and clean the dirt automatically, Design and build a prototype of a fish scales and dirt cleaner based on PLC OMRON CP1E-NA20DR-A is a solution in cleaning fish scales and large-scale fish excrement. The way the tool works is that the operator will put the fish into the machine, after the fish is inserted, the sensors at the entrance of the fish will respond to the fish by sending a signal to the PLC so that the PLC will turn on the induction motor as the main crust of the machine, after the engine starts the fish will start to clean the scales and dirt using a knife that has been designed to be used on the machine. Researchers used three fish samples in machine performance experiments to find out how efficient the process of combing and cleaning the dirt was compared to using manual cleaning. The results show that the tool has worked as a whole in scouring and cleaning the dirt as desired by the researcher.
References
B. Belton, S. R. Bush, and D. C. Little, “Not just for the wealthy: Rethinking farmed fish consumption in the Global South,” Global Food Security, vol. 16, pp. 85-92, 2018, https://doi.org/10.1016/j.gfs.2017.10.005.
K. Petroutsatou, A. Maravas, and A. Saramourtsis, “A life cycle model for estimating road tunnel cost,” Tunnelling and Underground Space Technology, vol. 111, p. 103858, 2021, https://doi.org/10.1016/j.tust.2021.103858.
J. F. Derakhshandeh, R. AlLuqman, S. Mohammad, H. AlHussain, G. AlHendi, D. AlEid, and Z. Ahmad, “A comprehensive review of automatic cleaning systems of solar panels,” Sustainable Energy Technologies and Assessments, vol. 47, p. 101518, 2021, https://doi.org/10.1016/j.seta.2021.101518.
Y. Wang, X. Ren, Z. Jing, M. Liu, Q. Peng, and L. Fu, "Design and Application of a Non-wrapped Programmable Logic Controller (PLC) Laboratory Kit for Automatic Control Education," 2022 20th International Conference on Information Technology Based Higher Education and Training (ITHET), pp. 1-6, 2022, https://doi.org/10.1109/ITHET56107.2022.10031646.
Y. A. Fatimah, K. Govindan, R. Murniningsih, and A. Setiawan, “Industry 4.0 based sustainable circular economy approach for smart waste management system to achieve sustainable development goals: A case study of Indonesia,” Journal of Cleaner Production, vol. 269, p. 122263, 2020, https://doi.org/10.1016/j.jclepro.2020.122263.
J. Griboff, J. C. Carrizo, R. I. Bonansea, M. E. Valdés, D. A. Wunderlin, and M. V. Amé, “Multiantibiotic residues in commercial fish from Argentina. The presence of mixtures of antibiotics in edible fish, a challenge to health risk assessment,” Food chemistry, vol. 332, p. 127380, 2020, https://doi.org/10.1016/j.foodchem.2020.127380.
M. Bonato, F. Corrà, M. Bellio, L. Guidolin, L. Tallandini, P. Irato, and G. Santovito, “PFAS environmental pollution and antioxidant responses: an overview of the impact on human field,” International journal of environmental research and public health, vol. 17, no. 21, p. 8020, 2020, https://doi.org/10.3390/ijerph17218020.
S. E. Navarro et al., "Proximity Perception in Human-Centered Robotics: A Survey on Sensing Systems and Applications," in IEEE Transactions on Robotics, vol. 38, no. 3, pp. 1599-1620, 2022, https://doi.org/10.1109/TRO.2021.3111786.
R. D. Barnett, "Induction motors: Early development [History]," in IEEE Power and Energy Magazine, vol. 20, no. 1, pp. 90-98, 2022, https://doi.org/10.1109/MPE.2021.3122773.
S. Sharma, M. V. Aware, and A. Bhowate, “Integrated Battery Charger for EV by Using Three-Phase Induction Motor Stator Windings as Filter,” in IEEE Transactions on Transportation Electrification, vol. 6, no. 1, pp. 83-94, 2020, https://doi.org/10.1109/TTE.2020.2972765.
A. Kumar and V. M. Srivastava, "A Novel Feeder Protection System Using Fast Switching PhotoMOS Relay," 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT), pp. 1-4, 2020, https://doi.org/10.1109/ICCCNT49239.2020.9225383.
G. Peter and S. B. Iderus, “Design of enhanced energy meter using GSM prepaid system and protective relays,” Materials Today: Proceedings, vol. 39, pp. 582-589, 2021, https://doi.org/10.1016/j.matpr.2020.08.471.
P. P. Singh, M. R. Kumar Raja, A. Raj, and M. A. Muqeet, "Solution to Interfacing Problems of Programmable Logic Controller in Hardware Replacement," 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), 2020, pp. 1-7, 2020, https://doi.org/10.1109/ICRAIE51050.2020.9358273.
N. S. Abdullah et al., "Programmable Logic Controller (PLC) Automation Control Learning Kit Programmed: Using The CX-Programmer Software," 2021 4th International Symposium on Agents, Multi-Agent Systems and Robotics (ISAMSR), pp. 119-123, 2021, https://doi.org/10.1109/ISAMSR53229.2021.9567833.
V. V. Alekseev, A. V. Tsareva, N. V. Romantsova, and M. E. Goncharenko, "Methodological Support of Studying the Principles of Multichannel Measuring Systems Construction," 2021 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (ElConRus), pp. 778-781, 2021, https://doi.org/10.1109/ElConRus51938.2021.9396151.
A. Alam, "Should Robots Replace Teachers? Mobilisation of AI and Learning Analytics in Education," 2021 International Conference on Advances in Computing, Communication, and Control (ICAC3), pp. 1-12, 2021, https://doi.org/10.1109/ICAC353642.2021.9697300.
N. Lestari, D. A. Badri, A. Khadafi, K. A. Munastha, I. Sarief, and W. Wijaya, "An Automatic Sorting Machine Using Weight Sensor and Moisture Content Measurement for Sweet Potatoes," 2022 16th International Conference on Telecommunication Systems, Services, and Applications (TSSA), pp. 1-5, 2022, https://doi.org/10.1109/TSSA56819.2022.10063888.
G. Wang, "A New Approach for PLC Ladder Diagram Design," 2021 IEEE International Conference on Electro Information Technology (EIT), Mt. Pleasant, MI, USA, 2021, pp. 021-026, 2022, https://doi.org/10.1109/EIT51626.2021.9491834.
M. Glavaš, I. Krčmar and P. Marić, "Modelling of a sequential system," 2021 20th International Symposium INFOTEH-JAHORINA (INFOTEH), pp. 1-6, 2021, https://doi.org/10.1109/INFOTEH51037.2021.9400657.
Y. Yan, Q. Li, W. Chen, W. Huang and J. Liu, "Hierarchical Management Control Based on Equivalent Fitting Circle and Equivalent Energy Consumption Method for Multiple Fuel Cells Hybrid Power System," in IEEE Transactions on Industrial Electronics, vol. 67, no. 4, pp. 2786-2797, 2020, https://doi.org/10.1109/TIE.2019.2908615.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Wahyu Sapto Aji, Teguh Priyono
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.