Alat Pengecek Sampah Pendaki Gunung Berbasis Raspberry Pi 3 dan Barcode Scanner
DOI:
https://doi.org/10.12928/biste.v4i1.4293Abstract
The problem that is often encountered on many hiking trails is the lack of environmental awareness from the climber, which leads to trash littering. This study aims to design and develop a Raspberry Pi 3 Based Mountaineer Garbage Check Tool and Barcode Scanner that can help mountain managers to overcome the amount of garbage on the mountain. Raspberry Pi 3 is used to run various functions that can execute programs against an application. A Barcode scanner is used to read the code on the barcode. After the barcode scanner reads the code on the barcode, the code will be sent to the Raspberry Pi 3 and displayed on the monitor. This tool requires Java Netbeans, used to create applications in which there are various kinds of menus, including the Data Menu, Data Items, and Reports. The results of the application test in this study indicate that all forms can run well according to their respective duties and functions. The results of the barcode reading test on light intensity show that if the light intensity value is 0 LUX, the reading distance is 1-50 cm, while if the light intensity value is 10569-20338 LUX, the reading distance is 1-5 cm. This tool can be used for 6 hours 36 minutes. The climber's garbage checker that has been designed can work well. The resulting database of the application is stored regularly in PhpMyAdmin.
Permasalahan yang sering dijumpai saat mendaki gunung yaitu kurangnya kesadaran para pendaki untuk menjaga lingkungan, masih banyak pendaki meninggalkan sampah. Penelitian ini bertujuan untuk merancang dan mengembangkan Alat Pengecek Sampah Pendaki Gunung Berbasis Raspberry Pi 3 dan Barcode Scanner yang dapat membantu pengelola gunung untuk mengatasi banyaknya sampah di gunung. Raspberry Pi 3 digunakan untuk menjalankan berbagai macam fungsi yang dapat mengeksekusi program terhadap sebuah aplikasi. Barcode scanner digunakan untuk membaca kode pada Barcode. Setelah barcode scanner membaca kode pada barcode, maka kode akan dikirim ke Raspberry Pi 3 dan ditampilkan pada monitor. Alat ini memerlukan Java Netbeans, digunakan untuk membuat aplikasi yang di dalamnya terdapat berbagai macam menu, di antaranya yaitu Menu Data, Data Barang, dan Laporan. Hasil uji aplikasi dalam penelitian ini menunjukkan bahwa semua form dapat berjalan dengan baik sesuai dengan tugas dan fungsi masing-masing. Hasil uji pembacaan barcode terhadap intensitas cahaya menunjukkan bahwa jika nilai intensitas cahaya 0 LUX maka jarak baca sebesar 1-50 cm, sedangkan jika nilai intensitas cahaya 10569-20338 LUX maka jarak baca sebesar 1-5 cm. Alat ini dapat digunakan selama 6 jam 35 menit. Alat pengecek sampah pendaki yang telah dirancang dapat bekerja dengan baik. Database hasil dari aplikasi tersimpan dengan teratur pada PhpMyAdmin.
References
S. Bronto, P. Asmoro, and M. Efendi, “Gunung Api Lumpur di Daerah Cengklik dan Sekitarnya, Kabupaten Boyolali Provinsi Jawa Tengah,” Jurnal Geologi dan Sumberdaya Mineral, vol. 18, no. 3, pp. 147–159, Aug. 2017, doi: 10.33332/JGSM.GEOLOGI.V18I3.269.
F. A. Rahman, A. Kristiyanto, and S. Sugiyanto, “Motif, motivasi, dan manfaat aktivitaspendakian gunung sebagai olahraga rekreasi masyarakat,” Multilateral Jurnal Pendidikan Jasmani dan Olahraga, vol. 16, no. 2, Dec. 2017, doi: 10.20527/multilateral.v16i2.4251.
E. Deta Lustiyati, R. Stulasyqin Fadli, and T. Puspitawati, “Hubungan pengetahuan, sikap dan perilaku pendaki gunung dalam pengelolaan sampah (studi kasus di gunung prau, kabupaten wonosobo),” Jurnal Belantara, vol. 5, no. 2, Aug. 2022, doi: 10.29303/jbl.v5i2.879.
S. Novianti, F. F. Zamilah, and T. Andrianto, “Perilaku Pendakian Gunung di Masa Kenormalan Baru (Analisis Perspektif Pendaki Gunung di Jawa Barat),” Journal of Event, Travel and Tour Management, vol. 2, no. 1, pp. 9–18, 2022, doi: 10.34013/jett.v2i1.785.
J. Dinamika, E. Pembangunan, F. W. Sabila, and E. Y. Purwanti, “Pendakian di jawa tengah: motivasi ekowisata dan perilaku wisatawan,” JURNAL DINAMIKA EKONOMI PEMBANGUNAN, vol. 2, no. 3, pp. 67–86, Feb. 2020, doi: 10.14710/JDEP.2.3.67-86.
A. Rijal, R. Rinayanti, L. Nurwulan, and U. Supriatna, “Tingkat kesadaran para pendaki gunung terhadap lingkungan taman wisata alam gunung papandayan,” GEOAREA | Jurnal Geografi, vol. 3, no. 2, pp. 40–48, Nov. 2020.
M. Syaputra, “Perencanaan Pengelolaan Sampah Di Jalur Pendakian Taman Nasional Gunung Rinjani,” Jurnal Belantara, vol. 2, no. 1, pp. 17–23, 2019, doi: 10.29303/jbl.v2i1.99.
H. Widya, Syafrawali, and R. Salsabila, “Aplikasi Barcode Scanner Food Halal Pada Produk Makanan Impor Berbasis Android,” Journal of Electrical Technology, vol. 4, no. 1, pp. 2502–3624, 2019.
C. A. Febiyanti, “Implementasi Barcode Scanner Pada Aplikasi Cek Harga Dan Hitung (Si-Ceking) Berbasis Mobile,” Jurnal Teknologi dan Sistem Komputer, vol. 6, no. 2, pp. 26–33, 2018.
A. Asmar and G. B. Putra, “Rancang Bangun Aplikasi Sistem Inventory dengan Barcode di Laboratorium Teknik Elektro Universitas Bangka Belitung,” Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering), vol. 8, no. 1, pp. 33–38, Apr. 2021, doi: 10.33019/JURNALECOTIPE.V8I1.1922.
H. Muchtar and R. S. Hakiki, “Monitoring Suhu Kelembaban dan Polusi Udara Berbasis Raspberry Pi 3 dengan Menggunakan Transmisi Radio Frekuensi,” RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer), vol. 3, no. 2, p. 61, Dec. 2020, doi: 10.24853/resistor.3.2.61-70.
P. Novantara, T. Sugiharto, and E. Januar, “Implementasi Algoritma Digital Differential Analyzer dalam Penentuan Rute Pada Peta Topografi berbasis Android,” JEJARING : Jurnal Teknologi dan Manajemen Informatika, vol. 6, no. 2, pp. 16–25, Nov. 2021, doi: 10.25134/JEJARING.V6I2.6740.
D. Ardian, P. D. Larasati, and A. Irawan, “Perancangan Sistem Informasi Aplikasi Rental Mobil Menggunakan Java Netbeans dan MySQL pada Perusahaan Dean’s Car Rent,” Applied Information System and Management (AISM), vol. 1, no. 1, 2018, doi: 10.15408/aism.v1i1.8670.
R. E. Standsyah and I. S. Restu, “Implementasi Phpmyadmin Pada Rancangan Sistem Pengadministrasian,” UJMC (Unisda Journal of Mathematics and Computer Science), vol. 3, no. 2, pp. 38–44, 2017.
L. Firmansyah, Hafidudin, and A. Hartaman, “Perancangan Dan Implementasi Sistem Informasi Logistik Terintegrasi Barcode Scanner Dan Web,” e-Proceeding of Applied Science, vol. 5, no. 1, pp. 280–288, 2019.
R. Panuntun, A. F. Rochim, and K. T. Martono, “Perancangan Papan Informasi Digital Berbasis Web pada Raspberry pi,” Jurnal Teknologi dan Sistem Komputer, vol. 3, no. 2, p. 192, 2015, doi: 10.14710/jtsiskom.3.2.2015.192-197.
A. Saputra, “Manajemen Basis Data Mysql Pada Situs FTP Lapan Bandung,” Jurnal Berita Dirgantara, vol. 13, no. 4, pp. 155–162, 2012.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Fadli Maulana. F, Nuryono Satya Widodo
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.