Fire Extinguisher Wheel Robot Based on Arduino Mega 2560 R3 with Android Smartphone Control
DOI:
https://doi.org/10.12928/biste.v3i1.1760Keywords:
Arduino Mega 2560, Smartphone android, Bluetooth, robot pemadam apiAbstract
The development of technology in the smartphone sector is currently developing very rapidly which results in smartphones becoming one of the primary needs. Judging from the ability of a smartphone that is able to run various applications, one of which is to use it as a control tool. Through this research, a fire extinguisher wheeled robot prototype will be built with the control of an Android smartphone based on the Arduino Mega 2560 via Bluetooth wireless communication. The results showed that the robot can function properly controlled via an Android smartphone with a maximum distance of 10 meters, the robot is able to respond and extinguish the fire with a maximum range of 60 cm, and the robot is able to know the distance of the barrier around it (in cm) with an accuracy of up to 97%. To extinguish the fire the robot can move with an average speed of movement of the robot of 22.2 seconds per extinguishing phase.
References
Amri, R., Budiman, S., Safriati, E, “Prototype Robot Pemadam Api Beroda Menggunakan Teknik Navigasi Wall Follower,” Jurnal Rekayasa Elektrika, vol.10, no.2, Oktober 2012. DOI: https://doi.org/10.17529/jre.v10i2.134
Aliff, M., Sani, N.S., Yusof, M., Zainal, A, “Development of Fire Fighting Robot (QRob),” International Journal of Advanced Computer Science and Application, vol.10, no.1, 2019. DOI: https://doi.org/10.14569/IJACSA.2019.0100118
Bhatia, S.K., Gupta, S., Sharma, A., Verma, R, ”Android Phone Controlled Robot Using Bluetooth,” International Journal of Electronic and Electrical Engineering, vol.7, no.5, pp.443-448, 2014. Online
Bidkar, A., Doke, D., Kadam, K., Patil, R., Pimpale, V, “Fire Fighting Robot,” International Journal Of Engineering And Computer Science, vol. 7, no.1, pp. 23383-23485, Januari 2018. DOI: https://doi.org/10.18535/ijecs/v7i1.02
Arunkumar, B., Sruthilaya, G, “Control of bluetooth enabled robots via android apk,” International Journal of Advances in Engineering & Technology, vol. 2, no. 7, pp. 262-267, April 2016. Online
Pathak, M., Rawat, R., Singh, S., Thakur, R, “Fire Fighting Robot Remotely Controlled By Android Application,” International Journal of Scientific Engineering and Research, vol.5, no.5, May 2017. Online
Marianto, A., Muchlas, “Rancang bangun robot forklift dengan kendali smartphone android berbasis arduino mega 2560,” Jurnal Ilmu Teknik Elektro Komputer dan Informatika, vol. 3, no. 2, Desember 2017. DOI: https://doi.org/10.26555/jiteki.v3i2.7483
Bhattachary, A., Goswami, P., Maity, A., Paul, A, “Android Application Based Bluetooth Controlled Robotic Car,” International Journal of Intelligent Information Systems, vol.6, no.5, pp. 62-66, 2017. DOI: https://doi.org/10.11648/j.ijiis.20170605.12
Dey, A., Nandi, S., Pal, A., Roy, L, “Three way controlled android Smartphone based robotic vehicle via Bluetooth,” International Journal of Advanced Research in Computer and Communication Engineering, vol.4, no.9, September 2015. DOI: https://doi.org/10.17148/IJARCCE.2015.4946
Budiastra, I. N., Er, N. I., Setiawan, N., Swamardika, A, “Design of Mobile Robot with Robotic Arm Utilising Microcontroller and Wireless Communication, ” International Journal of Engineering and Technology, vol. 9, no. 2, April-May 2017. DOI: https://doi.org/10.21817/ijet/2017/v9i2/170902170
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Herry Setyo Nugroho, Tole Sutikno
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.