One-Shot Pulse Boost Converter-Based Inductor-Synchronized Piezoelectric Energy Harvester
DOI:
https://doi.org/10.12928/biste.v6i2.10020Keywords:
Piezoelectric, SSHI, Energy Harvesting, Converter, Boost ConverterAbstract
In this paper, we aim to review current methods of energy harvesting, focusing on piezoelectric energy. To optimize the use of piezoelectric devices in applications, a model is needed to observe the performance generated from piezoelectricity. To achieve better performance, the rectifier and capacitor systems are connected to a boost converter circuit. Another method is to use the Synchronized Switch Harvesting Inductor (SSHI) method. This method implements a stand-alone switching technique based on transistors and rectifier diodes and does not require an external power supply. This research creates an electric energy harvesting floor device by utilizing piezoelectricity in the form of a harvester, which aims to find out how piezoelectric works and to obtain a circuit with the most efficient characteristics as a piezoelectric power generator using SSHI and a boost converter. This study compares the characteristics of series, parallel, and series-parallel circuits on the floor of the most optimal piezoelectric energy harvester to generate voltage. The results of the data collection were based on the number of steps on the floor of the 16-piece piezoelectric energy harvester with a series-parallel circuit configuration connected with an SSHI circuit and without an SSHI circuit. In this test, the resulting voltage output is a DC voltage with an input step of 60 times the step on piezoelectricity. In this paper, an energy harvester using the SSHI circuit provides a more stable voltage on the harvester floor than a boost converter by providing 16 piezoelectric pieces arranged in series parallel. A floor energy harvester with a series-parallel configuration connected to SSHI gets the most optimal result compared to using a boost converter.
References
S. Gao, Y. Lin and J. Zhu, "The Effect of Mounting Structure and Piezoelectric Pressure Probe Sensor Incident Angle on the Free-Field Measurement," in IEEE Sensors Journal, vol. 19, no. 17, pp. 7226-7233, 2019, https://doi.org/10.1109/JSEN.2019.2913680.
R. A. Cooper and R. Cooper, “Rehabilitation Engineering: A perspective on the past 40-years and thoughts for the future,” Medical engineering & physics, vol. 72, pp. 3-12, 2019, https://doi.org/10.1016/j.medengphy.2019.08.011.
Z. Zhang, H. Xiang, and L. Tang, “Modeling, analysis and comparison of four charging interface circuits for piezoelectric energy harvesting,” Mechanical Systems and Signal Processing, vol. 152, p. 107476, 2021, https://doi.org/10.1016/j.ymssp.2020.107476.
A. Behera and A. Behera, “Energy harvesting and storing materials,” Advanced Materials: An Introduction to Modern Materials Science, pp. 507-555, 2022, https://doi.org/10.1007/978-3-030-80359-9_15.
B. Maamer, A. Boughamoura, A. M. F. El-Bab, L. A. Francis, and F. Tounsi, “A review on design improvements and techniques for mechanical energy harvesting using piezoelectric and electromagnetic schemes,” Energy Conversion and Management, vol. 199, p. 111973, 2019, https://doi.org/10.1016/j.enconman.2019.111973.
R. R. Moussa, W. S. Ismaeel, and M. M. Solban, “Energy generation in public buildings using piezoelectric flooring tiles; A case study of a metro station,” Sustainable Cities and Society, vol. 77, p. 103555, 2022, https://doi.org/10.1016/j.scs.2021.103555.
P. A. Alekseev, V. A. Sharov, B. R. Borodin, M. S. Dunaevskiy, R. R. Reznik, and G. E. Cirlin, “Effect of the uniaxial compression on the GaAs nanowire solar cell,” Micromachines, vol. 11, no. 6, p. 581, 2020, https://doi.org/10.3390/mi11060581.
R. J. Ganesh, D. B. Shanmugam, S. Munusamy and T. Karthikeyan, “Experimental study on footstep power generation system using piezoelectric sensor,” Materials Today: Proceedings, vol. 45, pp. 1633-1637, 2021, https://doi.org/10.1016/j.matpr.2020.08.474.
M. R. Sarker, S. Julai, M. F. M. Sabri, S. M. Said, M. M. Islam, and M. Tahir, “Review of piezoelectric energy harvesting system and application of optimization techniques to enhance the performance of the harvesting system,” Sensors and Actuators A: Physical, vol. 300, p. 111634, 2019, https://doi.org/10.1016/j.sna.2019.111634.
B. Bao and Q. Wang, “Small‐scale experimental study on the optimisation of a rooftop rainwater energy harvester using electromagnetic generators in light rains,” International Journal of Energy Research, vol. 44, no. 13, pp. 10778-10796, 2020, https://doi.org/10.1002/er.5726.
P. Visconti, V. M. Mastronardi, M. De Vittorio and R. De Fazio, "A Waste-produced Floor with Solar and Mechanical Energy Harvesters to Power Charging Stations or OLED Lighting Systems," 2022 7th International Conference on Smart and Sustainable Technologies (SpliTech), pp. 1-6, 2022, https://doi.org/10.23919/SpliTech55088.2022.9854363.
L. Wang, R. P. Burgos and A. Vazquez Carazo, "Design and Analysis of Tunable Piezoelectric Transformer Based DC/DC Converter with AC Output Inductor," 2020 IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 1398-1403, 2020, https://doi.org/10.1109/APEC39645.2020.9124475.
P. Yingyong, P. Thainiramit, S. Jayasvasti, N. Thanach-Issarasak, and D. Isarakorn, “Evaluation of harvesting energy from pedestrians using piezoelectric floor tile energy harvester,” Sensors and Actuators A: Physical, vol. 331, p. 113035, 2021, https://doi.org/10.1016/j.sna.2021.113035.
J. Choi, I. Jung, and C. Y. Kang, “A brief review of sound energy harvesting,” Nano energy, vol. 56, pp. 169-183, 2019, https://doi.org/10.1016/j.nanoen.2018.11.036.
Z. Long, P. Li, J. Chen, H. S. -H. Chung and Z. Yang, "Self-Powered Single-Inductor Rectifier-Less SSHI Array Interface With the MPPT Technique for Piezoelectric Energy Harvesting," in IEEE Transactions on Industrial Electronics, vol. 69, no. 10, pp. 10172-10181, 2022, https://doi.org/10.1109/TIE.2021.3139175.
S. Xi, W. Li, J. Guo and J. Liang, "A Self-Powered Piezoelectric Energy Harvesting Interface Circuit Based on Adaptive SSHI with Fully Integrated Switch Control," 2020 IEEE International Symposium on Circuits and Systems (ISCAS), pp. 1-4, 2020, https://doi.org/10.1109/ISCAS45731.2020.9180969.
M. Meng, D. Wang, B. D. Truong, S. Trolier-McKinstry, S. Roundy and M. Kiani, "A Multi-Beam Shared-Inductor Reconfigurable Voltage/SECE Mode Piezoelectric Energy Harvesting Interface Circuit," in IEEE Transactions on Biomedical Circuits and Systems, vol. 13, no. 6, pp. 1277-1287, 2019, https://doi.org/10.1109/TBCAS.2019.2942261.
A. Morel, A. Brenes, D. Gibus, E. Lefeuvre, P. Gasnier, G. Pillonnet, and A. Badel, “A comparative study of electrical interfaces for tunable piezoelectric vibration energy harvesting,” Smart Materials and Structures, vol. 31, no. 4, p. 045016, 2022, https://doi.org/10.1088/1361-665X/ac54e8.
B. Pollet, G. Despesse and F. Costa, "A New Non-Isolated Low-Power Inductorless Piezoelectric DC–DC Converter," in IEEE Transactions on Power Electronics, vol. 34, no. 11, pp. 11002-11013, 2019, https://doi.org/10.1109/TPEL.2019.2900526.
E. Roshandel and J. He, "High Efficiency High Step-Up DC-DC Converter to Drive Piezo-Electric Transmitters," 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, 2019, pp. 1-16, 2019, https://doi.org/10.1109/IAS.2019.8911977.
J. Wen, N. Wan, R. Wang, S. Chen, J. Zheng and J. Li, "A Novel Linear Walking Type Piezoelectric Actuator Based on the Parasitic Motion of Flexure Mechanisms," in IEEE Access, vol. 7, pp. 25908-25914, 2019, https://doi.org/10.1109/ACCESS.2019.2900381.
A. Mahajan, A. Goel, and A. Verma, “A review on energy harvesting based piezoelectric system,” Materials Today: Proceedings, vol. 43, pp. 65-73, 2021, https://doi.org/10.1016/j.matpr.2020.11.210.
P. R. Prasad, A. Bhanuja, L. Bhavani, N. Bhoomika and B. Srinivas, "Power Generation Through Footsteps Using Piezoelectric Sensors Along with GPS Tracking," 2019 4th International Conference on Recent Trends on Electronics, Information, Communication & Technology (RTEICT), pp. 1499-1504, 2019, https://doi.org/10.1109/RTEICT46194.2019.9016865.
L. Wu and D. S. Ha, "A Self-Powered Piezoelectric Energy Harvesting Circuit With an Optimal Flipping Time SSHI and Maximum Power Point Tracking," in IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 66, no. 10, pp. 1758-1762, 2019, https://doi.org/10.1109/TCSII.2019.2924963.
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Tole Sutikno, Muhammad Sukmadika Pradana, Anggit Pamungkas
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.