Receiving and Storage Process Analysis Raw Materials using Check Sheet Method and Fishbone Diagram
DOI:
https://doi.org/10.12928/jafost.v5i2.7313Keywords:
Arrowroot starch, Cereals, Fishbone, Raw materials, StorageAbstract
Raw materials are very important to make sure finished product have a good quality or as the standard Company. Storage of raw materials can cause physical and chemical damage as well as the development of microorganisms and shorten the shelf life of materials. The method of data collection is done by collecting primary data in the form of observations, interviews and documentation. Secondary retrieval in the form of literature study which is then carried out the problem-solving analysis in the form of check sheets and fishbone diagram. Raw material was compared the company's standards with SNI regarding the quality requirements of arrowroot starch. The results show that the main cause of non-compliance with the company's SOP comes from humans. It can be concluded that the incoming raw materials are weighed and quality checked by QC by storage of raw materials by the storage criteria of each raw material including temperature, storage time, room and storage position. At the same time, we have measures accident which have greater occurrence probability to eliminate the risk of rejected product.
References
Adame-Siles, J. A., Guerrero-Ginel, J. E., Fearn, T., Garrido-Varo, A., & Pérez-Marín, D. (2020). Performance comparison of sampling designs for quality and safety control of raw materials in bulk: A simulation study based on NIR spectral data and geostatistical analysis. Chemometrics and Intelligent Laboratory Systems, 198. https://doi.org/10.1016/j.chemolab.2020.103940.
Alfarisy, M., & Rahmadhia, S. N. (2022). An analysis of the causes of damage to nata de coco in the fermentation process. Journal of Agri-Food Science and Technology, 2(1), 96–103. https://doi.org/10.12928/jafost.v2i1.4861.
Anacleto, S. da S., Borges, M. M. C., de Oliveira, H. L., Vicente, A. R., de Figueiredo, E. C., de Oliveira, M. A. L., Borges, B. J. P., de Oliveira, M. A., Borges, W. de S., & Borges, K. B. (2018). Evaluation of physicochemical properties as supporting information on quality control of raw materials and veterinary pharmaceutical formulations. Journal of Pharmaceutical Analysis, 8(3), 168–175. https://doi.org/10.1016/j.jpha.2018.01.001.
Ariza-Ortega, J. A., Ramos-Cassellis, M. E., Vargas Bello Pérez, E., Betanzos Cabrera, G., Molina Trinidad, E. M., Alanís García, E., Suárez Diéguez, T., & Díaz-Reyes, J. (2023). Lipid authentication of butter and margarine using Fourier transform infrared spectroscopy (FTIR). Measurement: Food, 11. https://doi.org/10.1016/j.meafoo.2023.100095.
Barbinta-Patrascu, M.-E., Bita, B., & Negut, I. (2024). From nature to technology: exploring the potential of plant-based materials and modified plants in biomimetics, bionics, and green innovations. Biomimetics, 9(7), 390. https://doi.org/10.3390/biomimetics9070390.
Barroso, A. G., & del Mastro, N. L. (2019). Physicochemical characterization of irradiated arrowroot starch. Radiation Physics and Chemistry, 158, 194–198. https://doi.org/10.1016/j.radphyschem.2019.02.020.
Crespo, A., Jiménez, A., Ruiz-Moyano, S., Merchán, A. V., Galván, A. I., Benito, M. J., & Martín, A. (2022). Low-frequency ultrasound as a tool for quality control of soft-bodied raw ewe’s milk cheeses. Food Control, 131. https://doi.org/10.1016/j.foodcont.2021.108405.
Ferro, P., & Bonollo, F. (2019). Materials selection in a critical raw materials perspective. Materials and Design, 177, 107848. https://doi.org/10.1016/j.matdes.2019.107848.
Fidianingsih, I., Aryandono, T., Widyarini, S., Herwiyanti, S., & Sunarti. (2022). Arrowroot (Maranta arundinacea L.) as a new potential functional food: A scoping review. International Food Research Journal, 29(6), 1240–1255. https://doi.org/10.47836/ifrj.29.6.02.
Hosseini, S. M., Soltanizadeh, N., Mirmoghtadaee, P., Banavand, P., Mirmoghtadaie, L., & Aliabadi, S. S. (2019). Gluten-free products in celiac disease : nutritional and techological challenges and solutions. Journal of Research in Medical Sciences, 24(1), 1–11. https://doi.org/10.4103/jrms.JRMS.
Hu, X. Z., Zheng, J. M., Li, X. ping, Xu, C., & Zhao, Q. (2014). Chemical composition and sensory characteristics of oat flakes: a comparative study of naked oat flakes from china and hulled oat flakes from western countries. Journal of Cereal Science, 60(2), 297–301. https://doi.org/10.1016/j.jcs.2014.05.015.
Kogan, K., López-Ortiz, A., Nikolenko, S. I., & Sirotkin, A. V. (2017). The impact of processing order on performance: A taxonomy of semi-FIFO policies. Journal of Computer and System Sciences, 88, 220–235. https://doi.org/10.1016/j.jcss.2017.04.001.
Lestari, E., Kiptiah, M., & Apifah, A. (2017). Karakterisasi tepung kacang hijau dan optimasi penambahan tepung kacang hijau sebagai pengganti tepung terigu dalam pembuatan kue bingka. Jurnal Teknologi Agro-Industri, 4(1), 20–34. https://doi.org/10.34128/jtai.v4i1.45.
Liu, L., Jones, B. F., Uzzi, B., & Wang, D. (2023). Data, measurement and empirical methods in the science of science. Nature Human Behaviour, 7(7), 1046–1058. https://doi.org/10.1038/s41562-023-01562-4.
Luo, T., Wu, C., & Duan, L. (2018). Fishbone diagram and risk matrix analysis method and its application in safety assessment of natural gas spherical tank. Journal of Cleaner Production, 174, 296–304. https://doi.org/10.1016/j.jclepro.2017.10.334.
Malki, M. K. S., Wijesinghe, J. A. A. C., Ratnayake, R. H. M. K., & Thilakarathna, G. C. (2023). Characterization of arrowroot (Maranta arundinacea) starch as a potential starch source for the food industry. Heliyon, 9(9), e20033. https://doi.org/10.1016/j.heliyon.2023.e20033.
Melcher, F., Dietrich, V., & Gäbler, H.-E. (2021). Analytical proof of origin for raw materials. Minerals, 11(5), 461. https://doi.org/10.3390/min11050461.
Oeda, S., & Kosaku, H. (2018). Development of a Check sheet for code-review towards improvement of skill level of novice programmers. Procedia Computer Science, 126, 841–849. https://doi.org/10.1016/j.procS.2018.08.018.
Pedapudi, S. K. G. K., & Rajasekar, B. (2023). Design of phase measurement system using Hybrid Dual D-FIFO-FF synchronizer and PWM based duty cycle computation. Measurement: Sensors, 26, 100708. https://doi.org/10.1016/j.measen.2023.100708.
Rahmadhia, S. N., Toni, D. R., & Fitriani, A. (2024). Physical characteristics of kepok banana bud (Musa paradisiaca linn.) flakes with variations of mocaf flour. Jurnal Keteknikan Pertanian, 12(1), 77–92. https://doi.org/10.19028/jtep.012.1.77-92.
Ramos-Martínez, B., Alonso-Herreros, J. M., & De Rosales-Cabrera, A. M. M. (2020). The importance of quality control in raw materials used in pharmaceutical formulations. Farmacia Hospitalaria, 44(1), 32–33. https://doi.org/10.7399/fh.11347.
Rukmini, H. S., & Naufalin, R. (2015). Formulation of high protein-instant tiwul by cereal germs and soy protein. Jurnal Teknologi Industri Pertanian, 25(3), 190–197.
Salas-Valerio, W. F., Aykas, D. P., Hatta Sakoda, B. A., Ludeña-Urquizo, F. E., Ball, C., Plans, M., & Rodriguez-Saona, L. (2022). In-field screening of trans-fat levels using mid- and near-infrared spectrometers for butters and margarines commercialized in the Peruvian market. Lwt, 157. https://doi.org/10.1016/j.lwt.2022.113074.
Salma, N., Setiyoko, A., Sari, Y. P., & Rahmadian, Y. (2024). Effect of wheat flour and yellow pumpkin flour ratios on the physical, chemical properties, and preference level of cookies. Journal of Agri-Food Science and Technology, 4(2), 59–70. https://doi.org/10.12928/jafost.v4i2.7882.
Sandoval, S. S., Amenábar, A., Toledo, I., Silva, N., & Contreras, P. (2024). Advances in the sustainable development of biobased materials using plant and animal waste as raw materials: a review. Sustainability, 16(3), 1073. https://doi.org/10.3390/su16031073.
Sarkisyan, V., Bessonov, V., & Kochetkova, A. (2017). Raw materials analysis and quality control. In Developing New Functional Food and Nutraceutical Products. Elsevier Inc. https://doi.org/10.1016/B978-0-12-802780-6.00011-0.
Schrijvers, D., Hool, A., Blengini, G. A., Chen, W. Q., Dewulf, J., Eggert, R., van Ellen, L., Gauss, R., Goddin, J., Habib, K., Hagelüken, C., Hirohata, A., Hofmann-Amtenbrink, M., Kosmol, J., Le Gleuher, M., Grohol, M., Ku, A., Lee, M. H., Liu, G., … Wäger, P. A. (2020). A review of methods and data to determine raw material criticality. Resources, Conservation and Recycling, 155, 104617. https://doi.org/10.1016/j.resconrec.2019.104617.
Sharma, B., Arora, R., & Sharma, G. (2023). Alternative raw material selection and impact of goods and service tax in food industry. Materials Today: Proceedings, 80, 1–7. https://doi.org/10.1016/j.matpr.2022.09.221.
Sulima, P., Kuszewska, A., & Przyborowski, J. A. (2021). Are Salix purpurea L. genotypes from natural locations promising candidates for the production of high-quality herbal raw materials under controlled conditions?. Industrial Crops and Products, 171. https://doi.org/10.1016/j.indcrop.2021.113982.
Surareungchai, S., Borompichaichartkul, C., Rachtanapun, C., Pongprasert, N., Jitareerat, P., & Srilaong, V. (2021). Simplify product safety and quality risk analysis of raw materials for conventional, soilless culture and organic salads. Food Control, 130, 108359. https://doi.org/10.1016/j.foodcont.2021.108359.
Wakabayashi, K. (2011). Quality control of raw materials. In Handbook of Adhesion Technology (pp. 1007–1029). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-01169-6_40.
Witasari, L. D., Nisrina, S., Yani, A. I. T., Heryadi, A. A., & Pranoto, Y. (2024). Characterization of porous starch produced from arrowroot (Maranta arundinacea L.) by enzymatic hydrolysis with α-amylase and glucoamylase. Carbohydrate Polymer Technologies and Applications, 7, 100445. https://doi.org/10.1016/j.carpta.2024.100445.
Yu, Q., Sun, B., Li, C., Yan, F., & Li, Y. (2024). Analysis of heat charging and release processes in cascade phase change materials energy storage floor heating systems: performance evaluation. Journal of Energy Storage, 78, 110020. https://doi.org/10.1016/j.est.2023.110020.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Ika Dyah Kumalasari, Maulidya Eka Wahyudi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with the Journal of Agri-food Science and Technology (JAFOST) agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
