Design of Automatic Door Lock Control System Library Nurul Jadid University Based On Arduino Uno R3 and QR-Code
DOI:
https://doi.org/10.12928/biste.v2i2.2741Keywords:
Kunci Pintu Otomatis, Arduino Uno R3, QR - Code, Solenoid Door Lock, RelaiAbstract
The Nurul Jadid University Library (UNUJA) currently requires valid visitor data, because the number of visitors is an indicator of library performance in terms of disciplining staff/employees. For this reason, the UNUJA library requires an automatic library door lock control system using Arduino Uno and QR-Code. In designing tools, Arduino Uno and QR-Code are integrated with the library database application. Based on testing and analysis, it can be obtained that the success rate of testing tools in reading QR-code is 100 percent. The conclusion is that the assembly of the library door lock control system based on Arduino Uno and integrated QR-Code with the database has been able to read digital input and output.
References
B. T. Atmojo, S. R. Sulistyanti, E. Nasrullah, “Model Sistem Kendali Pintu Otomatis Menggunakan Barcode Berbasis PC (Personal Komputer) Pada Gerbang Laboratorium Teknik Elektro Unila,” Electrician, vol. 7, no. 2, 2013. DOI: 10.23960/elc.v7n2.107
B. Paripurno, A. Haryoko, F. Amaluddin, “Rancang Bangun Sistem Pintu Masuk Wisata Berbasis Arduino dan QR-Code,” Prosiding SNasPPM, vol. 3, no. 1, 2018.
I. G. T. Isa, “Perancangan Sistem Parkir QR-Code Menggunakan Mikrokontroler Arduino Berbasis Android, Seminar Nasional Teknologi Informasi dan Multimedia 2017, STMIK AMIKOM Yogyakarta. Online
W. Saptohadi, Ritzkal, B. A. Prakosa, “Implementasi QR-Code Dinamic Pada Sistem One-Time Password (OTP) Sebagai Key Penggerak Solenoid Berbantuan Arduino Mega 2560,” Seminar Nasional Teknologi Informasi (SEMNATI 2018), vol. 1, 2018. Online
Y. P. Utama and J. Sutopo, “Kendali Hak Akses Pintu Masuk Mengggunakan QR Code, Tugas Akhir thesis, University of Technology Yogyakarta, 2019. Online
T. Lonika, S. Hariyanto, “Simulasi Smart Door Lock Berbasis QR Code Menggunakan Arduino Uno pada Penyewaan Apartemen Online,” ALGOR, vol. 1, no. 1, 2019. Online
A. Putra, D. H. R. Saputra, “Otomasi Rolling Door Menggunakan Android dan QR Code,” Jurnal Simetri Rekayasa, vol. 1, no. 2, 2019. Online
A. Hazarah, “Rancang Bangun Smart Door Lock Menggunakan QR-Code dan Solenoid,” Jurnal Teknologi Informatika dan Terapan, vol. 4, no. 1, pp. 5-10, 2017. DOI: 10.25047/jtit.v4i1.14
Akhmad Arisandi, “Prototipe Alat Pengukur Intensitas Hujan Tipe Tipping Bucket Berbasis IoT, Tugas Akhir, 2019. Online
G. A. Prakasa, A. Rakhmadi, “Prototype Sistem Kunci Pintu Berbasis QR Code dan Arduino,” Tugas Akhir, 2017. Online
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 moch badrus sholeh
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.