Review-Simulation Model of Power Electronic Converters by Using MATLAB
DOI:
https://doi.org/10.12928/biste.v8i3.14047Keywords:
Power Electronic Converter, DC/DC Converter, Inverter, AC/AC Converter, RectifierAbstract
Power electronics is known as one of the most important branches of electrical science or electrical engineering, focusing on the design of electronic circuits for control and conversion applications of electrical quantities between the input and output of electronic converters. Power electronics is linked to control (control systems) on the one hand and conversion (electrical energy conversion) on the other. Semiconductors (diodes, transistors, and thyristors) are used in power electronics construction. Industrial applications are one of the most important uses of power electronics. The use of power electronics in many fields provides improved energy use with a high level of efficiency, such as in renewable energies (such as solar panels and wind turbines), as well as electric vehicles and related industrial applications. Converters are named according to their function. Rectifiers convert alternating current (AC) to direct current (DC) in either single-phase or three-phase. Converters are constructed using semiconductors, including diodes, transistors, and thyristors. The number of electronic switches varies depending on the type of converter and is determined by the type of power source and the type of load connected to the converter's output. Another type of converter, called an inverter, works in the opposite direction to a rectifier, converting DC to alternating current in either single-phase or three-phase. To further understand converters, this review presents a literature review of power converters according to research contributions. The first research contribution includes an overview of the power electronics overview. The second research contribution identifies converter types, and the third identifies their applications. To further enhance knowledge, we use theoretical mathematical representations of these types of power converters and select simulation models using MATLAB to analyze their behavior through simulation results. Based on the results, appropriate conclusions can be drawn and contributions can be identified for future work.
References
O. Olatunde, U. F. Okoro, and A. T. Tola, “Multiagent based Power Management for Grid-connected Photovoltaic Source Using the Optimized Network Parameters From Butterworth Inertia Weight Particle Swarm Optimization,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 6, no. 4, pp. 366-380, 2024, https://doi.org/10.12928/biste.v6i4.11391.
N. S. A. Kaliky, S. A. Akbar, and A. R. C. Baswara, “Design of One-Phase Inverter Using EGS002 with SPWM,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 4, no. 3, pp. 132-141, 2023, https://doi.org/10.12928/biste.v4i3.6567.
M. I. Habib, “Review of Power Electronics for Smart Sustainable Energy Systems,” ASEAN Journal on Science and Technology for Development, vol. 43, no. 1, p. 1, 2026, https://doi.org/10.61931/2224-9028.1631.
H. Gong et al., “A megawatt ultra-wide bandgap semiconductor module for pulsed power electronics,” Nature Communications, 2026, https://doi.org/10.1038/s41467-026-71274-6.
A. N. Widyanto, M. A. K. Adhi, F. Husnayain, A. R. Utomo, and I. M. Ardita, “Techno–Economic Analysis of Rooftop Solar Panel Uprating on Commercial Building (Casestudy on Karawang Branch Office of XYZ Company),” Buletin Ilmiah Sarjana Teknik Elektro, vol. 5, no. 1, pp. 86-97, 2023, https://doi.org/10.12928/biste.v5i1.7579.
O. Olatunde, U. F. Okoro, and A. T. Tola, “Multiagent based Power Management for Grid-connected Photovoltaic Source Using the Optimized Network Parameters From Butterworth Inertia Weight Particle Swarm Optimization,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 6, no. 4, pp. 366-380, 2024, https://doi.org/10.12928/biste.v6i4.11391.
C. Wyon and M. V. de Voorde, "New Challenges for the Semiconductor Ecosystem," in IEEE Electron Devices Reviews, vol. 2, pp. 330-360, 2025, https://doi.org/10.1109/EDR.2025.3638339.
A. Dasgupta, S. Sen, P. Singh, and A. Raman, “A Comprehensive Overview of the Foundations of Semiconductor Materials,” Semiconductor Nanoscale Devices: Materials and Design Challenges, pp. 80-109, 2025, https://doi.org/10.2174/9789815313208125010007.
U. Soma, “Transistor Evolution: A Comprehensive Overview from TFT to TFET and Beyond: U. Soma,” Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, vol. 95, no. 2, pp. 113-125, 2025, https://doi.org/10.1007/s40010-025-00915-0.
R. Khale, R. Sangale, S. K. Agrawal and D. Pardeshi, "Design and Realization of a Multi-Level DC-AC Converter for High-Efficiency Power Conversion," 2025 3rd International Conference on Inventive Computing and Informatics (ICICI), pp. 1535-1541, 2025, https://doi.org/10.1109/ICICI65870.2025.11069951.
Y. Oren et al., “Modeling and experimental validation of broad input-output range three-voltage-level rectifier,” Inventions, vol. 9, no. 2, p. 37, 2024, https://doi.org/10.3390/inventions9020037.
H. M. Usman et al., “Optimization of grid-connected PV systems: Balancing economics and environmental sustainability in Nigeria,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 6, no. 3, pp. 237-253, 2024, https://doi.org/10.12928/biste.v6i3.11562.
X. Wang and X. Li, "A Review on the Utilization of Regenerative Braking Energy in Maglev Train Traction Power," 2025 IEEE China International Youth Conference on Electrical Engineering (CIYCEE), pp. 1-6, 2025, https://doi.org/10.1109/CIYCEE67631.2025.11308742.
F. Battal, D. Boss, R. H. Poelma, E. Vlieg, and J. J. Schermer, “Advancements in TLP Bonding for Power Electronics Die‐Attach Applications,” Advanced Materials Technologies, vol. 11, no. 4, p. e01166, 2026, https://doi.org/10.1002/admt.202501166.
K. Namrata, R. P. Saini, and D. P. Kothari, “Grid Integration Techniques in Solar and Wind-Based Energy Systems,” In Wind and Solar Energy Systems, pp. 273-339, 2024, https://doi.org/10.1007/978-981-99-9710-7_6.
T. Sutikno, M. S. Pradana, and A, Pamungkas, “One-Shot Pulse Boost Converter-Based Inductor-Synchronized Piezoelectric Energy Harvester,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 6, no. 2, pp. 104-112, 2024, https://doi.org/10.12928/biste.v6i2.10020.
T. Abuzairi and R. W. Rachmad, “Simple Simulation of Perturb and Observe MPPT Algorithm on Synchronous Buck Converte,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 5, no. 4, pp. 448-454, 2023, https://doi.org/10.12928/biste.v5i4.9347.
A. Sakhare and S. Mikkili, “Advanced DC–DC converter topologies for electric vehicles: Wide bandgap technologies, emerging trends and future challenges,” Electrical Materials and Applications, vol. 2, no. 1, p. e70023, 2025, https://doi.org/10.1049/ema3.70023.
K. A. Nugraha and T. Sutikno, “PID Control Based DC Boost Converter on Wheeled Soccer Robot,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 3, no. 2, p. 106-114, 2021, https://doi.org/10.12928/biste.v3i2.3942.
S. Kumari, S. S. Sahu, and B. Gupta, “Efficient SSHI circuit for piezoelectric energy harvester uses one shot pulse boost converter,” Analog Integrated Circuits and Signal Processing, vol. 97, no. 3, pp. 545-555, 2018, https://doi.org/10.1007/s10470-018-1218-1.
K. Salitha, H. A. Vidya and J. Ramprabhakar, "Advancement of Power Electronic Converter and Control Methods in Microgrid Systems: A Review," in IEEE Access, vol. 14, pp. 4402-4434, 2026, https://doi.org/10.1109/ACCESS.2025.3650614.
R. W. Rachmad and T. Abuzairi, “Efficiency Comparison of Asynchronous and Synchronous Buck Converter with Variation in Duty Cycle and Output Current,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 5, no. 1, pp. 41-55, 2023, https://doi.org/10.12928/biste.v5i1.7386.
S. Coelho, V. Monteiro, and J. L. Afonso, “Topological advances in isolated DC–DC converters: high-efficiency design for renewable energy integration,” Sustainability, vol. 17, no. 6, p. 2336, 2025, https://doi.org/10.3390/su17062336.
Y. Huo et al., “Emerging Advanced Electronic Packaging Materials for Thermal Management in Power Electronics,” Advanced Science, vol. 13, no. 17, p. e24348, 2026, https://doi.org/10.1002/advs.202524348.
R. Stewart and S. Jack, “High Step-Up DC-DC Converter Soft Computing Module for PV Module,” Journal of Science Engineering Technology and Management Science, vol. 2, no. 05, 2025, https://doi.org/10.63590/jsetms.2025.v02.i05.pp26-31.
A. M. Muslu and Y. Joshi, “Unlocking the Potential of Integrated Cooling and Power Delivery in Multi-chip Power Electronics Packages with Triply Periodic Minimal Surfaces (TPMS),” International Journal of Heat and Mass Transfer, vol. 255, p. 127866, 2026, https://doi.org/10.1016/j.ijheatmasstransfer.2025.127866.
M. Motamedi-Sedeh, S. A. M. Lahaghi, A. Abbasi-Moghaddam, B. Zaker and E. Farjah, "A New Topology of the High Step-Up Z-Source Three-Level DC-DC Converter," 2025 16th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), pp. 1-7, 2025, https://doi.org/10.1109/PEDSTC65486.2025.10912014.
A. Nadermohammadi, M. M. Hayati, A. Oshnoei, S. H. Hosseini, E. Babaei and M. Abapour, "Ultra-High Step-Up Quadratic DC-DC Converter with Soft Switching, High Efficiency, and Cost Effectiveness for DC Microgrid Applications," 2025 16th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), pp. 1-7, 2025, https://doi.org/10.1109/PEDSTC65486.2025.10911981.
N. Soni, A. C. Umarikar and A. S. Vijay, "Control Aspects of Multifunctional Converters in AC Microgrids: A Survey," in IEEE Access, vol. 13, pp. 91889-91901, 2025, https://doi.org/10.1109/ACCESS.2025.3573154.
Y. Tong, I. Salhi, Q. Wang, G. Lu, and S. Wu, “Bidirectional DC-DC converter topologies for hybrid energy storage systems in electric vehicles: a comprehensive review,” Energies, vol. 18, no. 9, p.2312, 2025, https://doi.org/10.3390/en18092312.
I. Soltani, G. R. Molaeimanesh, H. Gholizadeh and H. Vahedi, "A Review of High-Step-Up Non-Isolated DC–DC Converters Focusing on the Topology Methodology and Features," in IEEE Access, vol. 14, pp. 54320-54352, 2026, https://doi.org/10.1109/ACCESS.2026.3681231.
M. P. Kazmierkowski, "Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications [Book Review]," in IEEE Power Electronics Magazine, vol. 7, no. 2, pp. 94-94, June 2020, https://doi.org/10.1109/MPEL.2020.2987668.
T. Sakthiram, L. Yogesh, R. Srikanth, M. Prabhakar, and S. Angalaeswari, “Single-switch ultra-high step-Up DC-DC converter for PV applications,” Results in Engineering, vol. 25, p. 104050, 2025, https://doi.org/10.1016/j.rineng.2025.104050.
U. E. Boniface, “Power electronics and drives engineering advancing electrification automation efficiency electric mobility industrial energy conversion systems applications globally scalable,” Global Journal of Engineering and Technology Advances, vol. 26, no. 01, pp. 050-068, 2026, https://doi.org/10.30574/gjeta.2026.26.1.0007.
T. Sakthiram, L. Yogesh, R. Srikanth, M. Prabhakar, and K. Varesi, “Interleaved quartic high gain DC–DC converter,” Scientific Reports, vol. 15, no. 1, p. 216, 2025, https://doi.org/10.1038/s41598-024-84015-w.
M. Alharbi, “The dual role of grid-forming inverters: power electronics innovations and power system stability,” Electronics, vol. 15, no. 5, p. 1115, 2026, https://doi.org/10.3390/electronics15051115.
P. Szczesniak, “Challenges and design requirements for industrial applications of AC/AC power converters without DC-link,” Energies, vol. 12, no. 8, p. 1581, 2019, https://doi.org/10.3390/en12081581.
G. Anusha, A. V. V. Sudhakar, R. R. R. Deshmukh, and C. H. Basha, “A bibliometric analysis of research trends in electric vehicle power electronics: global perspectives and future directions,” Discover Applied Sciences, vol. 7, no. 5, p. 487, 2025, https://doi.org/10.1007/s42452-025-06996-1.
M. A. Tawfik, M. Ehab, A. Ahmed and J. -H. Park, "Single-Stage Isolated AC/AC Converter With Phase-Shifted Controller," in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 11, no. 2, pp. 1815-1826, 2023, https://doi.org/10.1109/JESTPE.2022.3219023.
S. K. Mazumder, J. H. Enslin and F. Blaabjerg, "Guest Editorial: Special Issue on Sustainable Energy Through Power-Electronic Innovations in Cyber-Physical Systems," in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 9, no. 5, pp. 5142-5145, 2021, https://doi.org/10.1109/JESTPE.2021.3109578.
K. V. Reshma, “Enhanced Efficiency of DC-AC Grid-Tied Converters for Photovoltaic Systems using AC-Link Integration,” CVR Journal of Science and Technology, vol. 27, no. 1, pp. 60-66, 2025, https://cvr.ac.in/ojs/index.php/cvracin/article/view/945.
M. E. Sulistyo, D. D. Susilo, M. Nizam, and U. Ubaidillah, “A literature review: bearing fault in bldc motor based on vibration and thermal signals,” Journal of Electrical, Electronic, Information, and Communication Technology, vol. 7, no. 1, pp. 10-15, 2025, https://doi.org/10.20961/jeeict.7.1.100165.
A. R. Al Tahtawi, S. Yahya, P. Elbizzar, and S. M. Ilman, “Speed Control of 3 Phase 1.5 kW Induction Motor using VSD LS SV015IG5A-2 with Proportional Integral Anti-Windup Method,” Journal of Fuzzy Systems and Control, vol. 2, no. 3, pp. 140-146, 2024, https://doi.org/10.59247/jfsc.v2i3.242.
H. Maghfiroh, A. J. Titus, A. Sujono, F. Adriyanto, and J. S. Saputro, “Induction motor torque measurement using prony brake system and close-loop speed control,” International Journal of Robotics and Control Systems, vol. 2, no. 3, pp. 594-605, 2022 https://doi.org/10.31763/ijrcs.v2i3.782.
H. Maghfiroh, I. Iftadi, and A. Sujono, “Speed Control of Induction Motor using LQG,” Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 565-570, 2021, https://doi.org/10.18196/26138.
M. Swargiary, J. Dey, and T. K. Saha, “Optimal Speed Control of Induction Motor Based on Linear Quadratic Regulator Theory,” Annual IEEE India Conference (INDICON), 2015, https://doi.org/10.1109/INDICON.2015.7443806.
M. Magzoub, N. Saad, R. Ibrahim, and M. Irfan, “An experimental demonstration of hybrid fuzzy-fuzzy space- vector control on AC variable speed drives,” Neural Computing and Applications, pp. 1-16, 2017, https://doi.org/10.1007/s00521-017-3008-6.
B. R. Ke, H. Maghfiroh, K. L. Lian, N. Chen, and D. F. Teshome, “Model of traction system and speed control for single train of Taipei mass rapid transit system,” IEEE International Conference on Advanced Intelligent Mechatronics (AIM), pp. 781-787, 2016, https://doi.org/10.1109/AIM.2016.7576863.
M. M. Islam, S. A. Siffat, I. Ahmad, and M. Liaquat, “Adaptive Nonlinear Control of Unified Model of Fuel Cell, Battery, Ultracapacitor and Induction Motor Based Hybrid Electric Vehicles,” IEEE Access, vol. 9, pp. 57486-57509, 2021, https://doi.org/10.1109/ACCESS.2021.3072478.
F. Battal, D. Boss, R. H. Poelma, E. Vlieg, and J. J. Schermer, “Advancements in TLP Bonding for Power Electronics Die‐Attach Applications,” Advanced Materials Technologies, vol. 11, no. 4, p. e01166, 2026, https://doi.org/10.1002/admt.202501166.
F. Y. Notash, J. He and H. Li, "Towards Digital Twin Driven High-Reliability Power Electronic Converters," in IEEE Open Journal of Power Electronics, vol. 7, pp. 683-721, 2026, https://doi.org/10.1109/OJPEL.2026.3664414.
L. Tightiz and W. K. Al-Shibli, “Novel AC–AC Converter Design for High‐Efficiency Wireless Electric Vehicle Charging Systems,” International Journal of Energy Research, vol. 2025, no. 1, p. 8866716, 2025, https://doi.org/10.1155/er/8866716.
K. P. Uvarajan, “Intelligent Control of Power Electronic Converters for Renewable Energy Grid Integration,” National Journal of Intelligent Power Systems and Technology, pp. 1-8, 2026, https://www.secitsociety.org/index.php/NJIPST/article/view/318.
S. P. Biswas, M. S. Uddin, M. R. Islam, S. Mondal, and J. Nath, “A Direct Single-Phase to Three-Phase AC/AC Power Converter,” Electronics, vol. 11, no. 24, p. 4213, 2022, https://doi.org/10.3390/electronics11244213.
H. Baik and J. Roy, "Review of Power Electronic Solutions for Dielectric Barrier Discharge Applications," in IEEE Transactions on Power Electronics, vol. 41, no. 7, pp. 11585-11610, 2026, https://doi.org/10.1109/TPEL.2026.3658517.
H. Wang, S. Xie, and L. Yuan, “A Single-Phase AC-AC Power Electronic Transformer Without Bulky Energy Storage Elements,” Energies, vol. 18, no. 7, p. 1769, 2025, https://doi.org/10.3390/en18071769.
N. K. Krishnamurthy, A. K. Pandey, S. Birla, G. Manikanta, and S. Kumar, “Smart inverters based technological advancements in future smart grids for improved flexible renewable energy penetration,” Discover Energy, vol. 5, no. 1, p. 28, 2025, https://doi.org/10.1007/s43937-025-00087-3.
M. A. Barrios, V. Cárdenas, J. M. Sandoval, J. M. Guerrero, and J. C. Vasquez, “A cascaded DC-AC-AC grid-tied converter for PV plants with AC-link,” Electronics, vol. 10, no. 4, p. 409, 2021, https://doi.org/10.3390/electronics10040409.
A. Udabe, I. Baraia-Etxaburu and D. G. Diez, "Gallium Nitride Power Devices: A State of the Art Review," in IEEE Access, vol. 11, pp. 48628-48650, 2023, https://doi.org/10.1109/ACCESS.2023.3277200.
V. Jagan, G. Sainath, M. Navyasri, A. Shiva, K. Chenchireddy and P. Giri, "Investigations on Novel Extreme-Boost DC-AC Converter," 2025 International Conference on Next Generation Communication & Information Processing (INCIP), pp. 875-880, 2025, https://doi.org/10.1109/INCIP64058.2025.11019806.
K. Suresh, E. Parimalasundar, and P. Aravind, “A high-efficiency multi-port bidirectional converter for renewable energy and hybrid electric vehicle applications,” Scientific Reports, 2026, https://doi.org/10.1038/s41598-026-48981-7.
Y. Du, X. Lu, and X. Wang, “Power system operation with power electronic inverter–dominated microgrids,” In New Technologies for Power System Operation and Analysis, pp. 259-274, 2021, https://doi.org/10.1016/B978-0-12-820168-8.00008-0.
A. Lahooti Eshkevari, I. Abdoli, M. Karimi Hajiabadi, and A. Mosallanejad, “High step‐up direct ac‐ac boost converter with optimal component counts based on SEPIC,” IET Power Electronics, vol. 17, no. 9, pp. 1106-1118, 2024, https://doi.org/10.1049/pel2.12644.
J. He, P. Mattavelli and F. Briz, "Guest Editorial Special Issue on Digital Twin Driven High-Reliability Power Electronic Systems," in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 13, no. 3, pp. 2709-2711, 2025, https://doi.org/10.1109/JESTPE.2025.3575229.
D. S. Osheba, S. M. Ahmed, and A. E. Lashine, “Analysis and experimental validation of single-phase cascaded boost AC–AC converter with high voltage gain,” Sustainability, vol. 15, no. 4, p. 3353, 2023, https://doi.org/10.3390/su15043353.
K. Tehrani et al., "A Survey of AI in System of Systems With a Focus on Power Electronic Systems—Part II: Maintenance and Forecasting," in IEEE Systems Journal, vol. 19, no. 4, pp. 1025-1037, 2025, https://doi.org/10.1109/JSYST.2025.3641439.
Z. Xiong and L. He, "A Single Phase Frequency-Variable Cuk-Type AC-AC Converter With Natural Commutation and Continuous Current," in IEEE Access, vol. 13, pp. 32357-32370, 2025, https://doi.org/10.1109/ACCESS.2025.3543024.
P. Manoharan and B. Chandrasekar, “Compact Single-Stage Optimized Power Electronic Converter for Dual-Mode Wired and Wireless Technologies for Versatile EV Charging Infrastructure,” Results in Engineering, p. 110535, 2026, https://doi.org/10.1016/j.rineng.2026.110535.
A. Kumar, R. Chaki and A. Dey, "Design of a Wind Emulator for Grid-Connected Type-IV Wind Energy Conversion Systems," 2025 IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE), pp. 1-6, 2025, https://doi.org/10.1109/PESGRE65581.2025.11521819.
Ye, J., Xuan, W., Guo, Q., Liu, Y., Wang, B., Zhang, X., & Iu, H. H. C. (2026). An overview of reinforcement learning for power electronic converters: Topology derivation, parameter design, and control implementation. Renewable and Sustainable Energy Reviews, 228, 116591, 2026, https://doi.org/10.1016/j.rser.2025.116591.
L. Gumilar, I. Ridzki, A. Muazib, A. I. Syah, and M. Z. Falah, “Dynamic Voltage Restorer for Mitigation of Voltage Sags Due to 3 Phase Motor Starts Based on Artificial Neural Networks,” J. Ilm. Tek. Elektro Komput. and Inform., vol. 9, no. 1, pp. 200–211, 2023, https://doi.org/10.26555/jiteki.v9i1.25897.
H. Maghfiroh, M. R. Subeno, M. R. Darmawan, and R. Prihananto, “A survey on traction motor and its prototyping method for electric vehicle application,” J. Electr. Electron. Inf. Commun. Technol., vol. 5, no. 1, pp. 21–26, 2023, https://doi.org/10.20961/jeeict.5.1.71317.
M. Y. A. Khan, “Enhancing electric vehicle performance: A case study on advanced motor drive systems, integration, efficiency, and thermal management,” Control Syst. Optim. Lett., vol. 3, no. 1, pp. 20–27, 2025, https://doi.org/10.59247/csol.v3i1.152.
H. Maghfiroh and C. Hermanu, “Optimal energy control of railway traction motor: Comparative study,” in AIP Conf. Proc., vol. 2097, no. 1, 2019, https://doi.org/10.1063/1.5098195.
L. Guangqiang, H. Fei, L. Qiang and J. Yanchao, "Torque close-loop control of a novel soft starter of induction motor," 2013 IEEE International Symposium on Industrial Electronics, pp. 1-6, 2013, https://doi.org/10.1109/ISIE.2013.6563613.
U. Sengamalai, G. Anbazhagan, T. M. Thamizh Thentral, P. Vishnuram, T. Khurshaid, and S. Kamel, “Three phase induction motor drive: A systematic review on dynamic modeling, parameter estimation, and control schemes,” Energies, vol. 15, no. 21, p. 8260, 2022, https://doi.org/10.3390/en15218260.
A. Alwadie, “A concise review of control techniques for reliable and efficient control of induction motor,” International Journal of Power Electronics and Drive Systems, vol. 9, no. 3, p. 1124, 2018, http://doi.org/10.11591/ijpeds.v9.i3.pp1124-1139.
S. Roy and R. Pandey, "Efficiency Optimization of Vector Controlled Induction Motor Drive by Field Orientation Technique," 2023 Third International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies (ICAECT), pp. 1-5, 2023, https://doi.org/10.1109/ICAECT57570.2023.10118261.
T. Sutikno, N. R. N. Idris, and A. Jidin, “A review of direct torque control of induction motors for sustainable reliability and energy efficient drives,” Renewable Sustainable Energy Review, vol. 32, pp. 548–58, 2014, https://doi.org/10.1016/j.rser.2014.01.040.
Y. Zahraoui, M. Akherraz, C. Fahassa, and S. Elbadaoui, “Induction Motor DTC Performance Improvement by Reducing Flux and Torque Ripples in Low Speed,” J. Robot. Control, vol. 3, no. 1, pp. 93–100, 2022, https://doi.org/10.18196/jrc.v3i1.12550.
V. Shekher, A. Sisodiya, A. K. Sinha, H. Harsh, and N. Soren, "Optimal tuning of PID controller for V/f control of linear induction motor using artificial biological intelligence," Franklin Open, vol. 9, p. 100183, 2024, https://doi.org/10.1016/j.fraope.2024.100183.
H. Maghfiroh, A. Ma’arif, F. Adriyanto, I. Suwarno, and W. Caesarendra, “Adaptive Linear Quadratic Gaussian Speed Control of Induction Motor Using Fuzzy Logic,” J. Eur. des Systèmes Autom., vol. 56, no. 4, pp. 703–711, 2023, https://doi.org/10.18280/jesa.560420.
Y. Zahraoui, M. Akherraz, and A. Ma’arif, “A Comparative Study of Nonlinear Control Schemes for Induction Motor Operation Improvement,” Int. J. Robot. Control Syst., vol. 2, no. 1, pp. 1–17, 2021, https://doi.org/10.31763/ijrcs.v2i1.521.
M. Zhou, S. Cheng, Y. Feng, W. Xu, L. Wang, and W. Cai, “Full-order terminal sliding-mode-based sensorless control of induction motor with gain adaptation,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 10, no. 2, pp. 1978–1991, 2021, https://doi.org/10.1109/JESTPE.2021.3081863.
C-K. Lin, “Radial basis function neural network-based adaptive critic control of induction motors,” Appl. Soft Computing, vol. 11, no. 3, 3066–3074, 2011, https://doi.org/10.1016/j.asoc.2010.12.007.
S. Mahfoud, A. Derouich, N. El Ouanjli, and M. El Mahfoud, "Enhancement of the direct torque control by using artificial neuron network for a doubly fed induction motor," Intelligent Systems with Applications, vol. 13, p. 200060, 2022, https://doi.org/10.1016/j.iswa.2022.200060.
M. Meriem, G. Ahmed and M. Youness, "Speed Control of Induction Motor using Fuzzy Logic Controller and DTC Strategy," 2024 4th International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET), pp. 1-5, 2024, https://doi.org/10.1109/IRASET60544.2024.10548936.
D. Bao, X. Pan, Y. Wang, H. Huang and B. Wu, "Integrated-Power-Control-Strategy-Based Electrolytic Capacitor-Less Back-to-Back Converter for Variable Frequency Speed Control System," in IEEE Transactions on Industrial Electronics, vol. 67, no. 12, pp. 10065-10074, 2020, https://doi.org/10.1109/TIE.2019.2960737.
F. Z. Peng, "Z-source inverter," Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344), pp. 775-781 vol. 2, 2002, https://doi.org/10.1109/IAS.2002.1042647.
R. Strzelecki, M. Adamowicz, N. Strzelecka and W. Bury, "New type T-Source inverter," 2009 Compatibility and Power Electronics, pp. 191-195, 2009, https://doi.org/10.1109/CPE.2009.5156034.
M. Mohr, W. T. Franke, B. Wittig and F. W. Fuchs, "Converter Systems for Fuel Cells in the Medium Power Range—A Comparative Study," in IEEE Transactions on Industrial Electronics, vol. 57, no. 6, pp. 2024-2032, 2010, https://doi.org/10.1109/TIE.2010.2044730.
K. Kuusela, M. Salo, and H. Tuusa, “A current source PWM-converter fed permanent magnet synchronous motor drive with adjustable dc-link current,” In Proceedings of the 2000 IEEE Nordic Workshop on Power and Industrial Electronics, NORPIE/2000, June 13-16, 2000, Aalborg, Denmark, pp. 54-58, 2000, https://researchportal.tuni.fi/en/publications/a-current-source-pwm-converter-fed-permanent-magnet-synchronous-m/.
M. Baumann and J. W. Kolar, "Comparative evaluation of modulation methods for a three-phase/switch buck power factor corrector concerning the input capacitor voltage ripple," 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230), pp. 1327-1332 vol. 3, 2001, https://doi.org/10.1109/PESC.2001.954304.
M. H. Bierhoff and F. W. Fuchs, "Loss Minimized Pulse Width Modulation of IGBT Current Source Converters," IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics, pp. 1739-1744, 2006, https://doi.org/10.1109/IECON.2006.347698.
R. W. Erickson and O. A. Al-Naseem, "A new family of matrix converters," IECON'01. 27th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.37243), pp. 1515-1520 vol.2, 2001, https://doi.org/10.1109/IECON.2001.976015.
C. Klumpner and C. Pitic, "Hybrid matrix converter topologies: An exploration of benefits," 2008 IEEE Power Electronics Specialists Conference, pp. 2-8, 2008, https://doi.org/10.1109/PESC.2008.4591887.
C. Klumpner, "Hybrid Direct Power Converters with Increased/Higher than Unity Voltage Transfer Ratio and Improved Robustness against Voltage Supply Disturbances," 2005 IEEE 36th Power Electronics Specialists Conference, pp. 2383-2389, 2005, https://doi.org/10.1109/PESC.2005.1581966.
P. D. Ziogas, D. Vincenti and G. Joos, "A practical PWM AC controller topology," Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting, pp. 880-887 vol.1, 1992, https://doi.org/10.1109/IAS.1992.244304.
B.-H. Kwon, B.-D. Min, and J.-H. Kim, “Novel topologies of ac choppers,” Proc. Inst. Elect. Eng. Elect. Power Appl., vol. 143, no. 4, pp. 323–330, 1996, https://doi.org/10.1049/ip-epa:19960374.
P. D. Ziogas, S. I. Khan and M. H. Rashid, "Analysis and Design of Forced Commutated Cycloconverter Structures with Improved Transfer Characteristics," in IEEE Transactions on Industrial Electronics, vol. IE-33, no. 3, pp. 271-280, 1986, https://doi.org/10.1109/TIE.1986.350233.
M. Brown. Power supply cookbook. Elsevier. 2001. https://books.google.co.id/books?hl=id&lr=&id=zWcpOJNz7n8C.
M. Ziegler, D. Domes, W. Hofmann and S. El-Barbari, "A new rectifier based topology for electrical drives: S-A-X -converter," 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551), vol.4, pp. 2924-2928, 2004, https://doi.org/10.1109/PESC.2004.1355298.
M. Braun and K. Hasse, “A direct frequency changer with control of input reactive power,” In Control in Power Electronics and Electrical Drives 1983, pp. 187-194, 1984, https://doi.org/10.1016/B978-0-08-030536-3.50031-3.
D. H. Shin, G. H. Cho, and S. B. Park, “Improved PWM method of forced commutated cycloconvertors,” In IEE Proceedings B (Electric Power Applications), vol. 136, no. 3, pp. 121-126, 1989, https://doi.org/10.1049/ip-b.1989.0017.
K. K. Mohapatra and N. Mohan, "Open-End Winding Induction Motor Driven With Matrix Converter For Common-Mode Elimination," 2006 International Conference on Power Electronic, Drives and Energy Systems, pp. 1-6, 2006, https://doi.org/10.1109/PEDES.2006.344385.
P. D. Ziogas, Y. -G. Kang and V. R. Stefanovic, "Rectifier-Inverter Frequency Changers with Suppressed DC Link Components," in IEEE Transactions on Industry Applications, vol. IA-22, no. 6, pp. 1027-1036,1986, https://doi.org/10.1109/TIA.1986.4504834.
S. Kim, S. -K. Sul and T. A. Lipo, "AC/AC power conversion based on matrix converter topology with unidirectional switches," in IEEE Transactions on Industry Applications, vol. 36, no. 1, pp. 139-145, 2000, https://doi.org/10.1109/28.821808.
R. Fernandes and O. Trescases, "A Multimode 1-MHz PFC Front End With Digital Peak Current Modulation," in IEEE Transactions on Power Electronics, vol. 31, no. 8, pp. 5694-5708, 2016, https://doi.org/10.1109/TPEL.2015.2499194.
B. Piepenbreier and L. Sack, "Regenerative drive converter with line-frequency switched rectifier and without DC link components," 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551), vol. 5, pp. 3917-3923, 2004, https://doi.org/10.1109/PESC.2004.1355168.
J. Holtz and U. Boelkens, "Direct frequency convertor with sinusoidal line currents for speed-variable AC motors," in IEEE Transactions on Industrial Electronics, vol. 36, no. 4, pp. 475-479, 1989, https://doi.org/10.1109/41.43005.
K. Shinohara, Y. Minari, and T. Irisa, “Analysis and fundamental characteristics of induction motor driven by voltage source inverter without dc link components IEEJ Transactions on Industry Applications, vol. 109, no. 9, pp. 637–644,1989, https://doi.org/10.1541/ieejias.109.637.
L. Wei and T. A. Lipo, "A novel matrix converter topology with simple commutation," Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248), pp. 1749-1754 vol. 3, 2001, https://doi.org/10.1109/IAS.2001.955769.
J. W. Kolar, M. Baumann, F. Schafmeister and H. Ertl, "Novel three-phase AC-DC-AC sparse matrix converter," APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335), pp. 777-791 vol. 2, 2002, https://doi.org/10.1109/APEC.2002.989333.
L. Wei, T. A. Lipo and Ho Chan, "Matrix converter topologies with reduced number of switches," 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289), pp. 57-63 vol. 1, 2002, https://doi.org/10.1109/PSEC.2002.1023847.
J. W. Kolar, F. Schafmeister, S. D. Round and H. Ertl, "Novel Three-Phase AC–AC Sparse Matrix Converters," in IEEE Transactions on Power Electronics, vol. 22, no. 5, pp. 1649-1661, 2007, https://doi.org/10.1109/TPEL.2007.904178.
K. P. Krovi and J. Bauer, “Control Strategy of Matrix Converter Using Different Algorithms with MATLAB Simulink and PLECS,” Electronics, vol. 15, no. 11, p. 2372, 2026, https://doi.org/10.3390/electronics15112372.
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Salam Waley Shneen, Suaad Makki Jiaad
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
