APLIKASI TEKNOLOGI PLTMH TURBIN PROPELLER OPEN FLUME SEBAGAI PEMBANGKIT LISTRIK DESA

Authors

  • Aris Suryadi Politeknik Enjinering Indorama http://orcid.org/0000-0002-0742-8347
  • Mochamad Faisal Politeknik Enjinering Indorama
  • Berayan Munthe Politeknik Enjinering Indorama
  • Mindit Eriyadi Politeknik Enjinering Indorama
  • Junaidy Burhan Politeknik Enjinering Indorama

DOI:

https://doi.org/10.12928/spekta.v1i2.2742

Keywords:

turbine rotation, open flume propeller

Abstract

Berecek Village, located in Sukatani District, Purwakarta Regency, West Java Province, has a river that has not been used optimally. This community service aims to utilize the available water energy so that it can produce Micro Hydro power plants. The manufacture of a micro-hydro power plant starts from measuring water potential, designing turbines and generators, then observing the work system and estimating the electrical power that will be generated. From the survey results, it is known that the water discharge is 0.0059 m3 / s and has a fall height of 4 m. This data is used to select the type of turbine, reservoir selection, quick pipe, and generator design. The results of the manufacture of micro power plants obtained by designing using an open flume propeller turbine with a turbine rotation speed of 2063 rpm, this PLTMH is able to produce turbine power of 1346 watts with a water discharge of 45 liters / second so that the power obtained is 1076 watts.

 

References

Afryantima S, Syukri M 2015 Design and Development of Prototype PLTPH Using Open Flume Turbines Department of Electrical Engineering Syiah Kuala University

Amsary M A, 2017. Report on the Design of Hydroelectric Power Plants Designing Propeller Turbines Department of Energy Conversion Engineering Bandung State Polytechnic

Akhmad S, 2015. Kaplan Water Turbine Simulation on PLTMH in Sampanahan River Magalau Hulu Village Kotabaru Regency Department of Mechanical Engineering Lampung Mangkurat University

Cihanjuang Inti Teknik, 2018. Operation Guide for PLTMH Turbine Propeller Open Flume 1 kW

Dwiyanto V, 2016. Analysis of Micro Hydro Power Plants (MHP) Faculty of Engineering University of Lampung

Joni H, 2016 .Selection of Water Turbines as Generator of 3 kW in Padayo Village Lubuk Kilangan District Department of Electrical Engineering Padang State Polytechnic

Suryadi A, 2015. Electric Energy & LAB Power Plant Diktat Indorama Engineering Polytechnic Purwakarta

Suryadi A, 2017. Over frequency Relay Calibration at the Unit 1 Generator Protection System of PT. Java Bali Power Plant Cirata Generation Unit Juteks 4(1) 41-47

Suryadi A, et.al., 2017. Karakteristik Pembebanan Puncak Grid System 500 kV terhadap Arus Eksitasi Pembangkitan. Jurnal Elektra, Vol. 2, Ed. 2 : p. 42-49

Suryadi A, et.al., 2020. Design of a Prime Mover Turbine Propeller Open Flume MicroHydro Electric Power Plant 1 kW, AASEC, Universitas Pendidikan Indonesia

Wibowo H, 2015. Technical and Economic Study of Micro Hydro Power Plant (PLTMH) Planning in Lematang River Pagar Alam City

Yohannes C, 2015. Design of Load-Frequency Control Systems in PLTMH Matano East Luwu Regency Department of Electrical Engineering Faculty of Engineering Hasanuddin University

Downloads

Additional Files

Published

2020-11-10

How to Cite

Suryadi, A., Faisal, M., Munthe, B., Eriyadi, M., & Burhan, J. (2020). APLIKASI TEKNOLOGI PLTMH TURBIN PROPELLER OPEN FLUME SEBAGAI PEMBANGKIT LISTRIK DESA. SPEKTA (Jurnal Pengabdian Kepada Masyarakat : Teknologi Dan Aplikasi), 1(2), 39–48. https://doi.org/10.12928/spekta.v1i2.2742

Issue

Vol. 1 No. 2 (2020)

Section

Technology Applications

License

Copyright (c) 2020 Aris Suryadi, Mochamad Faisal, Berayan Munthe, Mindit Eriyadi, Junaidy Burhan

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with SPEKTA (Jurnal Pengabdian Kepada Masyarakat: Teknologi dan Aplikasi) agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

 Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.