Protection and Monitoring System for LPG Leaks and Fires in Arduino-Based Rooms
DOI:
https://doi.org/10.12928/biste.v5i1.4784Keywords:
Protection System, MQ-6 Sensor, LPG, DHT22 Sensor, BlynkAbstract
This research is a development of previous research in overcoming of LPG gas leaks that cause fires. The system is designed using the main sensor MQ-6 and DHT22 sensors which will detect the gas concentration and temperature in the room, the protection system is equipped with an exhaust as a room freshener and a buzzer as a direct warning alarm and a water pump to extinguish a fire. And all of data will be displayed on the application Blynk and will send a notification on email users by using a Wi-Fi network. This system has succeeded in detecting the concentration of LPG gas with a sensor detection distance of 1 cm to 7 cm getting an average time of 1.6 seconds and percentage of error comparison 2.52%. In normal temperature detection, the percentage error is 1.14% and normal humidity is 2.98%, As for detection of rising temperature by using of wax media, the percentage error is 1.84% and humidity 1.87%. From these tests and getting results with a small percentage value this system can already be used and runs as well.
References
H. L. Tata, B. H. Narendra, and M. Mawazin, “Forest and land fires in Pelalawan District, Riau, Indonesia: Drivers, pressures, impacts and responses,” Biodiversitas Journal of Biological Diversity, vol. 19, no. 2, pp. 494-501, 2018, https://doi.org/10.13057/biodiv/d190224.
F. Mirahadi, B. McCabe, and A. Shahi, “IFC-centric performance-based evaluation of building evacuations using fire dynamics simulation and agent-based modeling,” Automation in Construction, vol. 101, pp. 1-16, 2019, https://doi.org/10.1016/j.autcon.2019.01.007.
M. M. Shahadat, A. Mallik, and M. Islam, “Development of an automated gas-leakage monitoring system with feedback and feedforward control by utilizing IoT,” Facta universitatis-series: Electronics and Energetics, vol. 32, no. 4, pp. 615-631, 2019, https://doi.org/10.2298/FUEE1904615S.
P. Anuradha, R. R. Arabelli, K. Rajkumar, and J. Ravichander, “Microcontroller Based Monitoring and Controlling of LPG Leaks Using Internet of Things,” In IOP Conference Series: Materials Science and Engineering, vol. 981, no. 3, p. 032021, 2020, https://doi.org/10.1088/1757-899X/981/3/032021.
Y. Irawan, A. W. Novrianto, and H. Sallam, “Cigarette Smoke Detection And Cleaner Based On Internet Of Things (IOT) Using Arduino Microcontroller and MQ-2 Sensor,” Journal of Applied Engineering and Technological Science (JAETS), vol. 2, no. 2, pp. 85-93, 2021, https://doi.org/10.37385/jaets.v2i2.218.
A. Winarno and M. Affandi, “Design and Construction of Smart House Prototype Based Internet of Things (Iot) Using Esp8266,” BEST: Journal of Applied Electrical, Science, & Technology, vol. 4, no. 1, pp. 11-14, 2022, https://doi.org/10.36456/best.vol4.no1.5447.
S. Suwarjono et al., “Design of a home fire detection system using Arduino and SMS gateway,” Knowledge, vol. 1, no. 1, pp. 61-74, 2021, https://doi.org/10.3390/knowledge1010007.
J. Jo, B. Jo, J. Kim, S. Kim, and W. Han, “Development of an IoT-based indoor air quality monitoring platform,” Journal of Sensors, 2020, https://doi.org/10.1155/2020/8749764.
P. Sihombing, T. P. Astuti, and D. Sitompul, “Microcontroller based automatic temperature control for oyster mushroom plants,” In Journal of Physics: Conference Series, vol. 978, no. 1, p. 012031, 2018, https://doi.org/10.1088/1742-6596/978/1/012031.
N. I. Ilahi, S. Baco, A. S. A. Achmad, and E. Umrianah, “Early Leakage Protection System of LPG (Liquefied Petroleum Gas) Based on ATMega 16 Microcontroller,” In IOP Conference Series: Materials Science and Engineering, vol. 336, no. 1, p. 012021, 2018, https://doi.org/10.1088/1757-899X/336/1/012021.
R. A. Koestoer, N. Pancasaputra, I. Roihan, and Harinaldi, “A simple calibration methods of relative humidity sensor DHT22 for tropical climates based on Arduino data acquisition system,” In AIP Conference Proceedings, vol. 2062, no. 1, p. 020009, 2019, https://doi.org/10.1063/1.5086556.
Y. A. Ahmad, T. Surya Gunawan, H. Mansor, B. A. Hamida, A. Fikri Hishamudin and F. Arifin, “On the Evaluation of DHT22 Temperature Sensor for IoT Application,” 2021 8th International Conference on Computer and Communication Engineering (ICCCE), pp. 131-134, 2021, https://doi.org/10.1109/ICCCE50029.2021.9467147.
N. Z. Malika, M. G. Md Johar, M. H. Alkawaz, A. Iqbal Hajamydeen and L. Raya, “Temperature & Humidity Monitoring for Poultry Farms using IOT,” 2022 IEEE 12th Symposium on Computer Applications & Industrial Electronics (ISCAIE), pp. 76-81, 2022, https://doi.org/10.1109/ISCAIE54458.2022.9794520.
P. Srivastava, M. Bajaj and A. S. Rana, “IOT based controlling of hybrid energy system using ESP8266,” 2018 IEEMA Engineer Infinite Conference (eTechNxT), pp. 1-5, 2018, https://doi.org/10.1109/ETECHNXT.2018.8385294.
P. Srivastava, M. Bajaj and A. S. Rana, “Overview of ESP8266 Wi-Fi module based Smart Irrigation System using IOT,” 2018 Fourth International Conference on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics (AEEICB), pp. 1-5, 2018, https://doi.org/10.1109/AEEICB.2018.8480949.
J. Mesquita, D. Guimarães, C. Pereira, F. Santos and L. Almeida, “Assessing the ESP8266 WiFi module for the Internet of Things,” 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), pp. 784-791, 2018, https://doi.org/10.1109/ETFA.2018.8502562.
R. K. Kodali, R. N. V. Greeshma, K. P. Nimmanapalli and Y. K. Y. Borra, “IOT Based Industrial Plant Safety Gas Leakage Detection System,” 2018 4th International Conference on Computing Communication and Automation (ICCCA), pp. 1-5, 2018, https://doi.org/10.1109/CCAA.2018.8777463.
H. V. Bhatnagar, P. Kumar, S. Rawat and T. Choudhury, “Implementation model of Wi-Fi based Smart Home System,” 2018 International Conference on Advances in Computing and Communication Engineering (ICACCE), pp. 23-28, 2018, https://doi.org/10.1109/ICACCE.2018.8441703.
V. Tamizharasan, T. Ravichandran, M. Sowndariya, R. Sandeep and K. Saravanavel, “Gas Level Detection and Automatic Booking Using IoT,” 2019 5th International Conference on Advanced Computing & Communication Systems (ICACCS), pp. 922-925,2019, https://doi.org/10.1109/ICACCS.2019.8728532.
X. Qian, R. Zhang, Q. Zhang, M. Yuan, and Y. Zhao, “Cause analysis of the large-scale LPG explosion accident based on key investigation technology: a case study,” ACS omega, vol. 6, no. 31, pp. 20644-20656, 2021, https://doi.org/10.1021/acsomega.1c02837.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Ivan Triyatno
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.