Load Characteristics with Current Detection Using an Arduino Based ACS712 Sensor

Authors

  • Nur Ratnawati Universitas Ahmad Dahlan
  • Sunardi Sunardi Universitas Ahmad Dahlan

DOI:

https://doi.org/10.12928/biste.v2i2.1522

Keywords:

Arus, Sensor ACS712, Arduino Uno, Clamp meter

Abstract

This study discusses tools for digital current monitoring using an Arduino-based ACS712 sensor. The current sensor ACS712 5A uses the principle of hall effect and is a current sensor whose circuit complexity is simple. The purpose of this microcontroller is to read data obtained from the sensor using the Analog to Digital Converter (ADC) feature and then display it in the serial monitor. The ATMEGA328 microcontroller is assisted by a current measuring circuit equipped with a sensor mounted in series against the circuit to be measured in order to measure the current flowing in the circuit. The test results show that the sensor can measure the current value at its peak value with an error value of -0.066 and a standard deviation value of 0.011419. Based on the test results it can be seen that the tool can work well and has a good accuracy rate.

References

Hartono, Sugito, and R. F. Abdullatif, “Sensor Kebocoran Arus Listrik pada Aliran Air Water Heater,” Jurnal Teras Fisika, vol. 1, no. 2, pp. 15–18, Sep. 2018.

M. Taif, M. Abbas, M. J.-J. Pro. Vol, and U. 2019, “Penggunaan Sensor ACS712 dan Sensor Tegangan untuk Pengukuran Jatuh Tegangan Tiga Fasa Berbasis Mikrokontroler dan Modul GSM shield,” Jurnal Protek, vol. 6, no. 1, pp. 42–47, 2018.

B. G. Melipurbowo, “Pengukuran Daya Listrik Real Time dengan Menggunakan Sensor Arus ACS712,” Orbith: Majalah Ilmiah Pengembangan Rekayasa dan Sosial, vol. 12, no. 1, pp. 17–23, Mar. 2016.

T. P. Satya, F. Puspasari, H. Prisyanti, and E. R. Meilani Saragih, “Perancangan dan Analisis Sistem Alat Ukur Listrik Menggunakan Sensor ACS712 Berbasis Arduino Uno dengan Standard Clampmeter,” Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, vol. 11, no. 1, pp. 39–44, Apr. 2020.

R. Kurniawan, “Perancangan Alat Monitoring Arus pada Circuit Breaker Menggunakan Sensor ACS712 dan Tampilan LCD,” INFORMATIKA: Jurnal Informatika, Manajemen dan Komputer, vol. 10, no. 1, pp. 12–17, May 2018.

R. I. Putra, S. Sunardi, and R. D. Puriyanto, “Monitoring Tegangan Baterai Lithium Polymer pada Robot Line Follower Secara Nirkabel,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 1, no. 2, p. 73, 2019.

R. D. Listianto, S. Sunardi, and R. D. Puriyanto, “Monitoring Tegangan Baterai Lithium Polymer pada Robot Sepak Bola Beroda secara Nirkabel,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 1, no. 1, p. 1, 2019.

A. Ma’arif, I. Iswanto, A. A. Nuryono, and R. I. Alfian, “Kalman Filter for Noise Reducer on Sensor Readings,” Signal and Image Processing Letters, vol. 1, no. 2, pp. 11–22, Jul. 2019.

M. I. Febryansah, A. Yudhana, and A. Ma’arif, “Urinoir Analyzer Pintar Pendeteksi Kelainan Pada Fungsi Ginjal Dengan Analisis Kadar Ph Dan Warna Pada Urin,” Mobile and Forensics, vol. 2, no. 1, pp. 36–44, May 2020.

Downloads

Published

2020-08-30

How to Cite

[1]
N. Ratnawati and S. Sunardi, “Load Characteristics with Current Detection Using an Arduino Based ACS712 Sensor”, Buletin Ilmiah Sarjana Teknik Elektro, vol. 2, no. 2, pp. 83–90, Aug. 2020.

Issue

Vol. 2 No. 2 (2020): Agustus

Section

Artikel

License

Copyright (c) 2020 Nur Ratnawati

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms: 

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License

This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.