A Comprehensive Review of Optimization Techniques in Industrial Applications: Trends, Classifications, and Future Directions
DOI:
https://doi.org/10.12928/biste.v7i3.13261Keywords:
Optimization Techniques, Industrial Applications, Metaheuristics, Hybrid AI-integration, Exact AlgorithmAbstract
In recent years, optimization techniques have played a central role in enhancing operational efficiency and decision-making across diverse industrial sectors, including manufacturing, logistics, and transportation, energy, healthcare, and agriculture. These sectors face complex, large-scale, and often nonlinear challenges that demand both precision and adaptability. The research contribution of this review is to provide a structured classification of optimization methods—namely exact algorithms, heuristics, metaheuristics, and AI-integrated hybrid models—and to critically evaluate their practical applications, limitations, and emerging trends across industries. This study adopts a review approach to identify and compare those techniques in solving various optimization problems. Through a detailed analysis of over 30 recent publications for last four years, the review highlights how these techniques are being applied in real-world industrial environments, including cold chain logistics, smart energy systems, precision agriculture, and healthcare scheduling. The results indicate a growing reliance on hybrid and AI-enhanced models due to their superior scalability, adaptability, and potential alignment with Industry 4.0 and Sustainable Development Goals (SDGs). However, challenges remain in areas such as computational efficiency, model interpretability, and real-time data integration. In conclusion, this study provides valuable insights for both researchers and practitioners seeking to apply optimization techniques more effectively in industrial systems, while also identifying critical research gaps for future exploration by addressing the growing complexity and sustainability demands of modern industry.
References
A. Bousdekis, K. Lepenioti, D. Apostolou, and G. Mentzas, “A Review of Data-Driven Decision-Making Methods for Industry 4.0 Maintenance Applications,” Electronics (Basel), vol. 10, no. 828, pp. 1–20, 2021, https://doi.org/10.3390/electronics.
C. Zhang and Z. Wang, “Data-driven distributionally robust optimization under combined ambiguity for cracking production scheduling,” Comput Chem Eng, vol. 181, p. 108538, Feb. 2024, https://doi.org/10.1016/j.compchemeng.2023.108538.
F. S. Rohman et al., “Application of multi-objective neural network algorithm in industrial polymerization reactors for reducing energy cost and maximising productivity,” Digital Chemical Engineering, vol. 13, 2024, https://doi.org/10.1016/j.dche.2024.100181.
D. Darvishi, S. Liu, and J. Yi-Lin Forrest, “Grey linear programming: a survey on solving approaches and applications,” Grey Systems: Theory and Application, vol. 11, no. 1, pp. 110–135, 2020, https://doi.org/10.1108/GS-04-2020-0043.
A. C. Leuveano, P. H. Kasih, M. I. Ridho, A. R. K. Lisan, A. A. Muhamed, and M. Z. Rafique, “Sustainable waste solutions: Optimizing location-allocation of 3R waste management sites in Gondokusuman, Yogyakarta, Indonesia through multi-maximal covering location approach,” International Journal of Industrial Optimization, pp. 1–15, 2024, https://doi.org/10.12928/ijio.v5i1.9251.
K. Rajwar and K. Deep, “Structural bias in metaheuristic algorithms: Insights, open problems, and future prospects,” Swarm Evol Comput, vol. 92, p. 101812, 2025, https://doi.org/10.1016/j.swevo.2024.101812.
H. Wang, B. Chen, H. Sun, A. Li, and C. Zhou, “AnFiS-MoH: Systematic exploration of hybrid ANFIS frameworks via metaheuristic optimization hybridization with evolutionary and swarm-based algorithms,” Appl Soft Comput, vol. 167, p. 112334, 2024, https://doi.org/10.1016/j.asoc.2024.112334.
F. Cao, M. Han, H. Shi, M. Li, and Z. Liu, “Comparative study on metaheuristic algorithms for optimising wave energy converters,” Ocean Engineering, vol. 247, p. 110461, 2022, https://doi.org/10.1016/j.oceaneng.2021.110461.
P. Burggräf, F. Steinberg, T. Weißer, and O. Radisic-Aberger, “Deciding on when to change – a benchmark of metaheuristic algorithms for timing engineering changes,” Int J Prod Res, vol. 62, no. 9, pp. 3230–3250, 2024, https://doi.org/10.1080/00207543.2023.2226778.
T. Cura, “A rapidly converging artificial bee colony algorithm for portfolio optimization,” Knowl Based Syst, vol. 233, p. 107505, 2021, https://doi.org/10.1016/j.knosys.2021.107505.
T. B. Dagne, “Agri-food distribution optimization using modified simulated annealing algorithm considering stochastic market demand,” IJIO, vol. 6, no. 1, pp. 1–16, 2025, https://doi.org/10.12928/ijio.v6i1.9406.
F. A. Alenizi, S. Abbasi, A. Hussein Mohammed, and A. Masoud Rahmani, “The artificial intelligence technologies in Industry 4.0: A taxonomy, approaches, and future directions,” Comput Ind Eng, vol. 185, p. 109662, 2023, https://doi.org/10.1016/j.cie.2023.109662.
C. He et al., “A Review on Artificial Intelligence Enabled Design, Synthesis, and Process Optimization of Chemical Products for Industry 4.0,” Processes, vol. 11, no. 2, p. 330, 2023, https://doi.org/10.3390/pr11020330.
A. Matin, M. R. Islam, X. Wang, H. Huo, and G. Xu, “AIoT for sustainable manufacturing: Overview, challenges, and opportunities,” Internet of Things, vol. 24, p. 100901, 2023, https://doi.org/10.1016/j.iot.2023.100901.
F. Walas Mateo and A. Redchuk, “IIoT/IoT and Artificial Intelligence/Machine Learning as a Process Optimization Driver under Industry 4.0 Model,” Journal of Computer Science & Technology, vol. 21 2021, https://doi.org/10.24215/16666038.21.e15.
M. I. Khan et al., “Integrating industry 4.0 for enhanced sustainability: Pathways and prospects,” Sustainable Production and Consumption, vol. 54, pp. 149-189, 2025, https://doi.org/10.1016/j.spc.2024.12.012.
M. Javaid, A. Haleem, R. P. Singh, R. Suman, and E. S. Gonzalez, “Understanding the adoption of Industry 4.0 technologies in improving environmental sustainability,” Sustainable Operations and Computers, vol. 3, pp. 203–217, 2022, https://doi.org/10.1016/j.susoc.2022.01.008.
M. S. Uzer, “New Hybrid Approaches Based on Swarm-Based Metaheuristic Algorithms and Applications to Optimization Problems,” Applied Sciences, vol. 15, no. 3, p. 1355, 2025, https://doi.org/10.3390/app15031355.
S. W. Rulita, Gunawan, and M. D. A. Fakhri, “Optimization of Nesting Systems in Shipbuilding: A Review,” Journal of Marine Science and Application, vol. 24, no. 1, pp. 152–175, 2025, https://doi.org/10.1007/s11804-025-00644-1.
P. G. Saghand and H. Charkhgard, “Exact solution approaches for integer linear generalized maximum multiplicative programs through the lens of multi-objective optimization,” Comput Oper Res, vol. 137, p. 105549, 2022, https://doi.org/10.1016/j.cor.2021.105549.
C. C. Rodríguez, A. A. Romero Quete, G. O. Suvire, and S. R. Rivera, “Optimization of multi-period investment planning in street lighting systems by mixed-integer linear programming,” International Journal for Simulation and Multidisciplinary Design Optimization, vol. 14, p. 14, 2023, https://doi.org/10.1051/smdo/2023017.
M. Rabe, Y. Bilan, K. Widera, and L. Vasa, “Application of the Linear Programming Method in the Construction of a Mathematical Model of Optimization Distributed Energy,” Energies (Basel), vol. 15, no. 5, 2022, https://doi.org/10.3390/en15051872.
A. Alotaibi and F. Nadeem, “A Review of Applications of Linear Programming to Optimize Agricultural Solutions,” International Journal of Information Engineering and Electronic Business, vol. 13, no. 2, pp. 11–21, 2021, https://doi.org/10.5815/ijieeb.2021.02.02.
I. Pappas et al., “Multiobjective Optimization of Mixed-Integer Linear Programming Problems: A Multiparametric Optimization Approach,” Ind Eng Chem Res, vol. 60, no. 23, pp. 8493–8503, 2021, https://doi.org/10.1021/acs.iecr.1c01175.
S. Raja, B. Arguello, and B. J. Pierre, “Dynamic Programming Method to Optimally Select Power Distribution System Reliability Upgrades,” IEEE Open Access Journal of Power and Energy, vol. 8, pp. 118–127, 2021, https://doi.org/10.1109/OAJPE.2021.3062330.
A. Grimaldi, F. D. Minuto, J. Brouwer, and A. Lanzini, “Profitability of energy arbitrage net profit for grid-scale battery energy storage considering dynamic efficiency and degradation using a linear, mixed-integer linear, and mixed-integer non-linear optimization approach,” J Energy Storage, vol. 95, 2024, https://doi.org/10.1016/j.est.2024.112380.
P. Balaguer-Herrero, J. C. Alfonso-Gil, C. I. Martinez-Marquez, G. Martinez-Navarro, S. Orts-Grau, and S. Segui-Chilet, “Two-Scale Model Predictive Control for Resource Optimization Problems With Switched Decisions,” IEEE Access, vol. 10, pp. 57824–57834, 2022, https://doi.org/10.1109/ACCESS.2022.3178846.
F. Superchi, N. Giovannini, A. Moustakis, G. Pechlivanoglou, and A. Bianchini, “Optimization of the power output scheduling of a renewables-based hybrid power station using MILP approach: The case of Tilos island,” Renew Energy, vol. 220, 2024, https://doi.org/10.1016/j.renene.2023.119685.
Y. Xiao, Y. Zhang, S. Kulturel-Konak, A. Konak, Y. Xu, and S. Zhou, “The aperiodic facility layout problem with time-varying demands and an optimal master-slave solution approach,” Int J Prod Res, vol. 59, no. 17, pp. 5216–5235, 2021, https://doi.org/10.1080/00207543.2020.1775909.
P. Marocco, D. Ferrero, E. Martelli, M. Santarelli, and A. Lanzini, “An MILP approach for the optimal design of renewable battery-hydrogen energy systems for off-grid insular communities,” Energy Convers Manag, vol. 245, 2021, https://doi.org/10.1016/j.enconman.2021.114564.
Z. Liu and O. Stursberg, “Efficient solution of distributed Milp in control of networked systems,” in IFAC-PapersOnLine, pp. 6723–6729, 2020, https://doi.org/10.1016/j.ifacol.2020.12.102.
R. Rikkas and R. Lahdelma, “Energy supply and storage optimization for mixed-type buildings,” Energy, vol. 231, 2021, https://doi.org/10.1016/j.energy.2021.120839.
A. V. Panteleev and A. A. Kolessa, “Optimal Open-Loop Control of Discrete Deterministic Systems by Application of the Perch School Metaheuristic Optimization Algorithm,” Algorithms, vol. 15, no. 5, 2022, https://doi.org/10.3390/a15050157.
Y. Lee and K. Lee, “New integer optimization models and an approximate dynamic programming algorithm for the lot-sizing and scheduling problem with sequence-dependent setups,” Eur J Oper Res, vol. 302, no. 1, pp. 230–243, 2022, https://doi.org/10.1016/j.ejor.2021.12.032.
P.-S. Chen and Z.-Y. Zeng, “Developing two heuristic algorithms with metaheuristic algorithms to improve solutions of optimization problems with soft and hard constraints: An application to nurse rostering problems,” Appl Soft Comput, vol. 93, p. 106336, 2020, https://doi.org/10.1016/j.asoc.2020.106336.
G. A. Rolim, M. S. Nagano, and B. de A. Prata, “Effective Heuristics and an Iterated Greedy Algorithm to Schedule Identical Parallel Machines Subject to Common Restrictive Due Windows,” Arab J Sci Eng, vol. 47, no. 3, pp. 3899–3913, 2022, https://doi.org/10.1007/s13369-021-06244-9.
T. Zhang, Q. Zeng, and X. Zhao, “Optimal local dimming based on an improved greedy algorithm,” Applied Intelligence, vol. 50, no. 12, pp. 4162–4175, 2020, https://doi.org/10.1007/s10489-020-01769-2.
J. A. P. Golak, C. Defryn, and A. Grigoriev, “Optimizing fuel consumption on inland waterway networks: Local search heuristic for lock scheduling,” Omega (United Kingdom), vol. 109, 2022, https://doi.org/10.1016/j.omega.2021.102580.
M. S. M. Pakpahan, L. E. Nugroho, and Widyawan, “Comparative analysis of rule-based heuristic algorithms for microservice chain placement in fog computing,” Results in Engineering, vol. 25, 2025, https://doi.org/10.1016/j.rineng.2025.104299.
T. Zhang, Q. Zeng, and X. Zhao, “Optimal local dimming based on an improved greedy algorithm,” Applied Intelligence, vol. 50, no. 12, pp. 4162–4175, 2020, https://doi.org/10.1007/s10489-020-01769-2.
S. Aqil and K. Allali, “Local search metaheuristic for solving hybrid flow shop problem in slabs and beams manufacturing,” Expert Syst Appl, vol. 162, p. 113716, 2020, https://doi.org/10.1016/j.eswa.2020.113716.
X.-L. Jing, Q.-K. Pan, and L. Gao, “Local search-based metaheuristics for the robust distributed permutation flowshop problem,” Appl Soft Comput, vol. 105, p. 107247, 2021, https://doi.org/10.1016/j.asoc.2021.107247.
M. M. Ferdaus, F. Zaman, and R. K. Chakrabortty, “Performance Improvement of a Parsimonious Learning Machine Using Metaheuristic Approaches,” IEEE Trans Cybern, vol. 52, no. 8, pp. 7277–7290, 2022, https://doi.org/10.1109/TCYB.2021.3051242.
S. Aqil, “Effective Population-Based Meta-heuristics with NEH and GRASP Heuristics Minimizing Total Weighted flow Time in No-Wait Flow Shop Scheduling Problem Under Sequence-Dependent Setup Time Constraint,” Arab J Sci Eng, vol. 49, no. 9, pp. 12235–12258, 2024, https://doi.org/10.1007/s13369-023-08642-7.
B. Toaza and D. Esztergár-Kiss, “A review of metaheuristic algorithms for solving TSP-based scheduling optimization problems,” Appl Soft Comput, vol. 148, 2023, https://doi.org/10.1016/j.asoc.2023.110908.
S. U. Seçkiner and Ş. Yilkici Yüzügüldü, “A new health-based metaheuristic algorithm: cholesterol algorithm,” International Journal of Industrial Optimization, vol. 4, no. 2, pp. 115–130, 2023, https://doi.org/10.12928/ijio.v4i2.7651.
S. Kim, A. C. Hooker, Y. Shi, G. H. J. Kim, and W. K. Wong, “Metaheuristics for pharmacometrics,” CPT Pharmacometrics Syst Pharmacol, vol. 10, no. 11, pp. 1297–1309, 2021, https://doi.org/10.1002/psp4.12714.
A. Hamdan, S. San Nah, G. Say Leng, C. Kang Leng, and T. Wei King, “Recent Evolutionary Algorithm Variants for Combinatorial Optimization Problem,” Applications of Modelling and Simulation, vol. 7, pp. 214–238, 2023, https://arqiipubl.com/ojs/index.php/AMS_Journal/article/view/515.
H. M. Asih, K. E. Chong, and M. Faishal, “Capacity planning and product allocations under testing time uncertainty in electronic industry,” Journal of Advanced Manufacturing Technology, vol. 12, no. 1, pp. 103–115, 2018, https://jamt.utem.edu.my/jamt/article/view/2106.
Z. N. Ansari and S. D. Daxini, “A State-of-the-Art Review on Meta-heuristics Application in Remanufacturing,” Archives of Computational Methods in Engineering, vol. 29, no. 1, pp. 427–470, 2022, https://doi.org/10.1007/s11831-021-09580-z.
A. Rahman and H. M. Asih, “Optimizing shipping routes to minimize cost using particle swarm optimization,” International Journal of Industrial Optimization, vol. 1, no. 1, p. 53, 2020, https://doi.org/10.12928/ijio.v1i1.1605.
S. Alam, X. Zhao, I. K. Niazi, M. S. Ayub, and M. A. Khan, “A comparative analysis of global optimization algorithms for surface electromyographic signal onset detection,” Decision Analytics Journal, vol. 8, 2023, https://doi.org/10.1016/j.dajour.2023.100294.
P. Burggräf, F. Steinberg, T. Weißer, and O. Radisic-Aberger, “Deciding on when to change – a benchmark of metaheuristic algorithms for timing engineering changes,” Int J Prod Res, vol. 62, no. 9, pp. 3230–3250, 2024, https://doi.org/10.1080/00207543.2023.2226778.
T. Cura, “A rapidly converging artificial bee colony algorithm for portfolio optimization,” Knowl Based Syst, vol. 233, p. 107505, 2021, https://doi.org/10.1016/j.knosys.2021.107505.
M. Abid, S. El Kafhali, A. Amzil, and M. Hanini, “Optimization of UAV Flight Paths in Multi-UAV Networks for Efficient Data Collection,” Arab J Sci Eng, vol. 50, no. 10, pp. 7207-7232, 2024, https://doi.org/10.1007/s13369-024-09369-9.
D. Maharana, R. Kommadath, and P. Kotecha, “An innovative approach to the supply-chain network optimization of biorefineries using metaheuristic techniques,” Engineering Optimization, vol. 55, no. 8, pp. 1278–1295, 2023, https://doi.org/10.1080/0305215X.2022.2080204.
X. Jin, “Application of Metaheuristic algorithm in intelligent logistics scheduling and environmental sustainability,” Intelligent Decision Technologies, vol. 18, no. 3, pp. 1727–1740, 2024, https://doi.org/10.3233/IDT-240280.
K. E. Chong, H. M. Asih, “An Integrated Robust Optimization Model of Capacity Planning under Demand Uncertainty in Electronic Industry,” International Journal of Mechanical & Mechatronics Engineering, vol. 15, no. 03, pp. 88–96, 2015, https://www.researchgate.net/publication/280063875_An_Integrated_Robust_Optimization_Model_of_Capacity_Planning_under_Demand_Uncertainty_in_Electronic_Industry.
[59] H. M. Asih, R. A. C. Leuveano, A. Rahman, and M. Faishal, “Traveling Salesman Problem With Prioritization for Perishable Products in Yogyakarta, Indonesia,” Journal of Advanced Manufacturing Technology, vol. 16, no. 3, pp. 15–27, 2022, https://jamt.utem.edu.my/jamt/article/view/6405.
H. M. Asih, R. A. C. Leuveano, and D. A. Dharmawan, “Optimizing lot sizing model for perishable bread products using genetic algorithm,” Jurnal Sistem dan Manajemen Industri, vol. 7, no. 2, pp. 139–154, 2023, https://doi.org/10.30656/jsmi.v7i2.7172.
R. A. C. Leuveano, H. M. Asih, M. I. Ridho, and D. A. Darmawan, “Balancing Inventory Management : Genetic Algorithm Optimization for A Novel Dynamic Lot Sizing Model in Perishable Product Manufacturing,” Journal of Robotics and Control (JRC), vol. 4, no. 6, pp. 878–895, 2023, https://doi.org/10.18196/jrc.v4i6.20667.
H. M. Asih, R. Achmad, C. Leuveano, D. A. Dharmawan, A. Ardiansyah, and A. Dahlan, “Genetic algorithm to optimize green vehicle routing and allocation planning for perishable products,” International Journal of Advances in Intelligent Informatics, vol. 11, no. 2, pp. 175–191, 2025, https://doi.org/10.26555/ijain.v11i2.1784.
A. Seyyedabbasi, R. Aliyev, F. Kiani, M. U. Gulle, H. Basyildiz, and M. A. Shah, “Hybrid algorithms based on combining reinforcement learning and metaheuristic methods to solve global optimization problems,” Knowl Based Syst, vol. 223, p. 107044, 2021, https://doi.org/10.1016/j.knosys.2021.107044.
F. Keivanian and R. Chiong, “A novel hybrid fuzzy–metaheuristic approach for multimodal single and multi-objective optimization problems,” Expert Syst Appl, vol. 195, p. 116199, 2022, https://doi.org/10.1016/j.eswa.2021.116199.
H. Wang, B. Chen, H. Sun, A. Li, and C. Zhou, “AnFiS-MoH: Systematic exploration of hybrid ANFIS frameworks via metaheuristic optimization hybridization with evolutionary and swarm-based algorithms,” Appl Soft Comput, vol. 167, p. 112334, 2024, https://doi.org/10.1016/j.asoc.2024.112334.
P. Mehrabi, S. Honarbari, S. Rafiei, S. Jahandari, and M. Alizadeh Bidgoli, “Seismic response prediction of FRC rectangular columns using intelligent fuzzy-based hybrid metaheuristic techniques,” J Ambient Intell Humaniz Comput, vol. 12, no. 11, pp. 10105–10123, 2021, https://doi.org/10.1007/s12652-020-02776-4.
A. Mazouzi, N. Hadroug, W. Alayed, A. Hafaifa, A. Iratni, and A. Kouzou, “Comprehensive optimization of fuzzy logic-based energy management system for fuel-cell hybrid electric vehicle using genetic algorithm,” Int J Hydrogen Energy, vol. 81, pp. 889–905, 2024, https://doi.org/10.1016/j.ijhydene.2024.07.237.
K. Zhou, S.-K. Oh, J. Qiu, W. Pedrycz, and K. Seo, “Reinforced Two-Stream Fuzzy Neural Networks Architecture Realized With the Aid of One-Dimensional/Two-Dimensional Data Features,” IEEE Transactions on Fuzzy Systems, vol. 31, no. 3, pp. 707–721, 2023, https://doi.org/10.1109/TFUZZ.2022.3186181.
H. Han, H. Liu, and J. Qiao, “Data-Knowledge-Driven Self-Organizing Fuzzy Neural Network,” IEEE Trans Neural Netw Learn Syst, vol. 35, no. 2, pp. 2081–2093, 2024, https://doi.org/10.1109/TNNLS.2022.3186671.
J. Tavoosi, A. Mohammadzadeh, and K. Jermsittiparsert, “A review on type-2 fuzzy neural networks for system identification,” Soft comput, vol. 25, no. 10, pp. 7197–7212, 2021, https://doi.org/10.1007/s00500-021-05686-5.
A. M. E. Ramirez-Mendoza, W. Yu, and X. Li, “A Novel Fuzzy System With Adaptive Neurons for Earthquake Modeling,” IEEE Access, vol. 8, pp. 101369–101376, 2020, https://doi.org/10.1109/ACCESS.2020.2998446.
D. Lee, S. J. Lee, and S. C. Yim, “Reinforcement learning-based adaptive PID controller for DPS,” Ocean Engineering, vol. 216, p. 108053, 2020, https://doi.org/10.1016/j.oceaneng.2020.108053.
N. T.-T. Vu, H. D. Nguyen, and A. T. Nguyen, “Reinforcement Learning-Based Adaptive Optimal Fuzzy MPPT Control for Variable Speed Wind Turbine,” IEEE Access, vol. 10, pp. 95771–95780, 2022, https://doi.org/10.1109/ACCESS.2022.3205124.
J. Barraza, L. Rodríguez, O. Castillo, P. Melin, and F. Valdez, “An Enhanced Fuzzy Hybrid of Fireworks and Grey Wolf Metaheuristic Algorithms,” Axioms, vol. 13, no. 7, p. 424, 2024, https://doi.org/10.3390/axioms13070424.
L. Ou, Y.-C. Chang, Y.-K. Wang, and C.-T. Lin, “Fuzzy Centered Explainable Network for Reinforcement Learning,” IEEE Transactions on Fuzzy Systems, vol. 32, no. 1, pp. 203–213, 2024, https://doi.org/10.1109/TFUZZ.2023.3295055.
N. Guo, C. Li, T. Gao, G. Liu, Y. Li, and D. Wang, “A Fusion Method of Local Path Planning for Mobile Robots Based on LSTM Neural Network and Reinforcement Learning,” Math Probl Eng, vol. 2021, pp. 1–21, 2021, https://doi.org/10.1155/2021/5524232.
H. M. Asih, A. Sutrisno, C. E. A. Wuisang, and M. Faishal, “Sustainability decision-making in poultry slaughterhouses: A comparative analysis of AHP and fuzzy AHP,” MethodsX, vol. 14, no. November, 2025, https://doi.org/10.1016/j.mex.2025.103193.
A. Bajwa, F. Jahan, I. Ahmed, and N. A. Siddiqui, “A Systematic Literature Review on AI-Enabled Smart Building Management Systems for Energy Efficiency and Sustainability,” American Journal of Scholarly Research and Innovation, vol. 03, no. 02, pp. 01–27, 2025, https://doi.org/10.63125/4sjfn272.
B. Dong, M. Duan, and Y. Li, “Exploration of Joint Optimization and Visualization of Inventory Transportation in Agricultural Logistics Based on Ant Colony Algorithm,” Comput Intell Neurosci, vol. 2022, 2022, https://doi.org/10.1155/2022/2041592.
H. Li, “Model and Simulation of Green Logistics for Agricultural Products Based on Particle Swarm Optimization,” in 2023 IEEE 5th Eurasia Conference on IOT, Communication and Engineering (ECICE), pp. 631–634, 2023, https://doi.org/10.1109/ECICE59523.2023.10383148.
J. Yu and L. Cheng, “Vehicle Path Optimization of Agricultural Products Cold Chain Logistics Based on Green Evaluation,” INMATEH - Agricultural Engineering, vol. 70, no. 2, pp. 441–454, 2023, https://doi.org/10.35633/inmateh-70-43.
M. Grytsiuk and V. Mysiv, “Optimization of Logistics and Sales of Products in Agricultural Enterprises Under the Conditions of Cooperation,” Market Infrastructure, no. 76, 2024, https://doi.org/10.32782/infrastruct76-1.
H. Liu, J. Zhang, Z. Zhou, Y. Dai, and L. Qin, “A Deep Reinforcement Learning-Based Algorithm for Multi-Objective Agricultural Site Selection and Logistics Optimization Problem,” Applied Sciences (Switzerland), vol. 14, no. 18, 2024, https://doi.org/10.3390/app14188479.
R. I. Lestari, L. Andrawina, and I. Mufidah, “Optimization of throughput rate prediction in animal feed industry using crisp-dm and operational research approaches,” IJIO, vol. 6, no. 1, pp. 87–102, 2025, https://doi.org/10.12928/ijio.v6i1.11357.
A. Mo, Y. Zhang, Y. Xiong, F. Ma, and L. Sun, “Energy–Logistics Cooperative Optimization for a Port-Integrated Energy System,” Mathematics, vol. 12, no. 12, 2024, https://doi.org/10.3390/math12121917.
F. Ahmad, A. Iqbal, I. Ashraf, M. Marzband, and I. Khan, “The Optimal Placement of Electric Vehicle Fast Charging Stations in the Electrical Distribution System with Randomly Placed Solar Power Distributed Generations,” Distributed Generation and Alternative Energy Journal, vol. 37, no. 4, pp. 1277–1304, 2022, https://doi.org/10.13052/dgaej2156-3306.37416.
G. Vijaiprabhu, P. Pandia Rajammal, S. Rema Devi, and P. Karthika, “Secured Optimal Path to Identify the Networking Model using Cold Chain Logistics in Hospital Environment,” in IOP Conference Series: Earth and Environmental Science, vol. 1057, no. 1, p. 012005, 2022, https://doi.org/10.1088/1755-1315/1057/1/012005.
K. Ransikarbum, C. Chaiyaphan, M. Sainakham, and A. Apichottanakul, “Model and Analysis of Delivery Route in the Healthcare Cold Chain Network using Minimax Vehicle Routing Problem with Time Window (VRPTW),” in 2023 5th International Conference on Management Science and Industrial Engineering, pp. 333–341, 2023, https://doi.org/10.1145/3603955.3603977.
Z. Ursani and A. A. Ursani, “Augmented tour construction heuristics for the travelling salesman problem,” International Journal of Industrial Optimization, vol. 4, no. 2, pp. 131–144, 2023, https://doi.org/10.12928/ijio.v4i2.7875.
M. Saini, V. S. Maan, A. Kumar, and D. K. Saini, “Metaheuristic algorithms and their applications in performance optimization of cyber-physical systems having applications in logistics,” International Journal of System Assurance Engineering and Management, vol. 15, no. 6, pp. 2202–2217, 2024, https://doi.org/10.1007/s13198-023-02236-0.
J. Almaazmi, M. Alzaabi, and D. K. Naidu, “Development of Novel Predicting System to Forecast Ocean Spot and Forward Prices Using Machine Learning,” in ADIPEC, p. D031S101R005, 2024. https://doi.org/10.2118/222874-MS.
Y. Astri, A. Kinanti, T. Bakhtiar, and F. Hanum, “A Heterogeneous Fleet Electric Vehicle Routing Model with Soft Time Windows,” International Journal of Industrial Optimization, vol. 5, no. 2, pp. 93–105, 2024, https://doi.org/10.12928/ijio.v5i2.9014.
H. M. Al-Jawahry, J. Sravanthi, J. Seetaram, S. S. J, K. S, and M. Ramya, “AI Integration in FI and VSC Technologies,” in 2025 International Conference on Intelligent Control, Computing and Communications (IC3), pp. 1121–1127, 2025, https://doi.org/10.1109/IC363308.2025.10957349.
F. Abbes, M. Sami, and T. Val, “Localization for transportation and urban planning in smart cities: interest, challenges, and solutions,” vol. 6, no. 1, pp. 28–46, 2025, https://doi.org/10.12928/ijio.v6i1.11027.
I. S. Lazukhin, M. I. Petrovskii, and I. V. Mashechkin, “Investigation and Development of Recursive Neural Networks for the Analysis of Industrial Processes,” Computational Mathematics and Modeling, vol. 33, no. 1, pp. 53–71, 2022, https://doi.org/10.1007/s10598-022-09556-z.
N. Harale, S. Thomassey, and X. Zeng, “Dynamic small-series fashion order allocation and supplier selection: a ga-topsis-based model,” International Journal of Industrial Optimization, vol. 4, no. 2, pp. 82–102, 2023, https://doi.org/10.12928/ijio.v4i2.7640.
S. U. Seçkiner and Ş. Yilkici Yüzügüldü, “A new health-based metaheuristic algorithm: cholesterol algorithm,” International Journal of Industrial Optimization, vol. 4, no. 2, pp. 115–130, 2023, https://doi.org/10.12928/ijio.v4i2.7651.
S. C. Chen, H. M. Chen, H. K. Chen, and C. L. Li, “Multi-Objective Optimization in Industry 5.0: Human-Centric AI Integration for Sustainable and Intelligent Manufacturing,” Processes, vol. 12, no. 12, 2024, https://doi.org/10.3390/pr12122723.
A. N. Senthilvel, T. Hemamalini, and G. Geetha, “Multi-objective elitist spotted hyena resource optimized flexible job shop scheduling,” International Journal of Industrial Optimization, pp. 81–92, 2024, https://doi.org/10.12928/ijio.v5i1.8743.
D. K. Chaturvedi and A. Suri, “Modeling and simulation of friction stir welding process: A neural approach,” International Journal of Industrial Optimization, pp. 60–80, 2024, https://doi.org/10.12928/ijio.v5i1.9010.
Y. Xia, X. Guo, E. Su, and L. Kong, “Research on bearing fault diagnosis technology based on machine learning,” International Journal of Industrial Optimization, pp. 45–59, 2024, https://doi.org/10.12928/ijio.v5i1.8106.
A. Ma’ruf and D. Budhiarti, “Development of genetic algorithm for human-robot collaboration assembly line design,” International Journal of Industrial Optimization, vol. 5, no. 2, pp. 118–133, 2024, https://doi.org/10.12928/ijio.v5i2.10027.
M. M. Yuniar and R. Ambarwati, “Prediction analysis of retail store sales level using neural network algorithm method based on customer segments,” International Journal of Industrial Optimization, pp. 177–188, 2025, https://doi.org/10.12928/ijio.v5i2.9889.
M. R. A. Purnomo and I. S. Saputro, “Product pricing based on customer perception quality and service convenience using interval type-2 fuzzy logic system,” International Journal of Industrial Optimization, pp. 161–176, 2025, https://doi.org/10.12928/ijio.v5i2.10825.
S. Phongmoo, C. Suedumrong, C. Kuensaen, R. Sinthavalai, and K. Leksakul, “Predictive maintenance in semiconductor manufacturing: Comparative analysis of machine learning models for downtime reduction,” Comput Ind Eng, vol. 205, p. 111211, 2025, https://doi.org/10.1016/j.cie.2025.111211.
H. Mansour, H. Abohashima, H. Elkhouly, and N. Harraz, “Smart quality control: integrating six sigma, machine learning and real-time defect prediction in manufacturing,” International Journal of Lean Six Sigma, 2025, https://doi.org/10.1108/IJLSS-07-2024-0150.
S. Ahmad and M. Kamruzzaman, “Inspection cost minimization by optimizing the number of inspectors in apparel manufacturing,” IJIO, vol. 6, no. 1, pp. 71–86, 2025, https://doi.org/10.12928/ijio.v6i1.9279.
F. J. Vasko, Y. Lu, M. S. Song, and D. Rando, “Filling the gap in weighted set covering problem test instances: implications for both researchers and practitioners,” International Journal of Industrial Optimization, vol. 6, no. 1, pp. 17–27, 2025, https://doi.org/10.12928/ijio.v6i1.10836.
Z. Xu, A. Elomri, R. Baldacci, L. Kerbache, and Z. Wu, “Frontiers and trends of supply chain optimization in the age of industry 4.0: an operations research perspective,” Ann Oper Res, vol. 338, no. 2–3, pp. 1359–1401, 2024, https://doi.org/10.1007/s10479-024-05879-9.
H. Liu and G. Zhang, “Enhancing Efficiency and Energy Optimization: Data-Driven Solutions in Process Industrial Manufacturing,” EAI Endorsed Transactions on Energy Web, vol. 11, pp. 1–11, 2024, https://doi.org/10.4108/ew.6098.
A. Manta-Costa, S. O. Araújo, R. S. Peres, and J. Barata, “Machine Learning Applications in Manufacturing—Challenges, Trends, and Future Directions,” IEEE Open Journal of the Industrial Electronics Society, vol. 5, pp. 1085–1103, 2024, https://doi.org/10.1109/OJIES.2024.3431240.
N. T. Viet and A. G. Kravets, “The New Method for Analyzing Technology Trends of Smart Energy Asset Performance Management,” Energies (Basel), vol. 15, no. 18, 2022, https://doi.org/10.3390/en15186613.
A. Zia and M. Haleem, “Bridging Research Gaps in Industry 5.0: Synergizing Federated Learning, Collaborative Robotics, and Autonomous Systems for Enhanced Operational Efficiency and Sustainability,” IEEE Access, vol. 13, pp. 40456–40479, 2025, https://doi.org/10.1109/ACCESS.2025.3541822.
D. Tripathi and S. Wairya, “A Cost Efficient QCA Code Converters for Nano Communication Applications,” International Journal of Computing and Digital Systems, vol. 12, no. 1, pp. 345–352, 2022, https://doi.org/10.12785/ijcds/120128.
R. Kwasi Bannor and K. Kofi Arthur, “A systematic review and bibliometric analysis on agribusiness gaps in emerging markets,” vol. 8, p. 100214, 2024, https://doi.org/10.1016/j.resglo.2024.100214.
R. Kour, R. Karim, P. Dersin, and N. Venkatesh, “Cybersecurity for Industry 5.0: trends and gaps,” vol. 6, p. 1434436, 2024, https://doi.org/10.3389/fcomp.2024.1434436.
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Hayati Mukti Asih, Effendi Mohamad, Irianto Irianto, Alfian Ma’arif
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
