Programmable Logic Controller (PLC) Based Paint Viscosity Control System

Authors

  • Gema Ridho Wicaksono Universitas Ahmad Dahlan
  • Riky Dwi Puriyanto Universitas Ahmad Dahlan

DOI:

https://doi.org/10.12928/biste.v3i1.1109

Keywords:

PLC, Viskositas, Kendali Suhu, LM35DZ, CX-Programmer

Abstract

Automatic control has been developed in various fields, one of which is paint quality control. Paint quality can be controlled from various categories, including paint quality based on its viscosity. Therefore, we need a system that can control the viscosity of the paint. The paint viscosity control system uses the PLC OMRON CP1E-NA20DRA with a heater as a heat source, and the LM35DZ sensor as a temperature reading sensor, and the RPM reading is used to calculate the viscosity value. The programming language used is the ladder diagram on the CX-Programmer. This system uses the PID (Proportional, Integral, and Derivative) Algorithm so that temperature control can be set at 30ºC so as not to affect the viscosity of the paint. In addition, this prototype provides two PID tuning options, namely manual and auto-tuning. Researchers get the results that a good temperature control system response has a PB value = 0.2%; Ti = 452.5s and TD = 66.6s. and control the accuracy level of paint viscosity control of 67.82%.

Author Biographies

Gema Ridho Wicaksono, Universitas Ahmad Dahlan

Program Studi Teknik Elektro

Riky Dwi Puriyanto, Universitas Ahmad Dahlan

Program Studi Teknik Elektro

References

N. J. Habibie and S. Anwar, “Pengaruh Perbandingan Campuran Cat dengan Thinner Terhadap Kualitas Hasil Pengecatan,” JTM, vol. 2, no. 3, pp. 97–104, 2014. Online

F. I. Permana and S. Anwar, “Pengaruh kualitas Thinner pada Campuran Cat Terhadap Hasil Pengecatan,” JTM, vol. 3, no. 2, pp. 53–61, 2014. Online

P. M. Khadafi, “Alat Ukur Viskositas Cairan Menggunakan Metode Silinder Konsentris Berputar,” F. MIPA UI, 2013.

A. Suwandi, “Peningkatan Kualitas untuk Meminimasi Cacat Produk Cat Polyurethane dengan Metode Taguchi,” Jurnal Inovisi, vol. 12, no. 02, pp. 55-71, 2016. Online

OMRON, “Instructions Reference Manual PLC Omron,” 2014. Online

R. D. Puriyanto, S. A. Akbar, and A. Aktawan, “Desain Sistem Biodiesel Berbasis PLC Berdasarkan Diagram Keadaan,” J. Ilm. Tek. Elektro Komput. dan Inform., vol. 4, no. 2, p. 1, 2019. DOI: https://doi.org/10.26555/jiteki.v4i2.12051

OMRON, “CP1E CPU Unit Hardware User Manual,” 2016. Online

M. F. Al Andzar and R. D. Puriyanto, “PID Control for Temperature and Motor Speed Based on PLC”, Sig.Img.Proc.Lett, vol. 1, no. 1, pp. 7-13, Mar. 2019. DOI: https://doi.org/10.31763/simple.v1i1.150

A. Junaidi and W. S. Aji, “Sistem Pengontrol Suhu Ruangan dengan Algoritma PID Menggunakan PLC Omron CP1e-NA20DR-A,” J. Ilm. Tek. Elektro Komput. dan Inform., vol. 3, no. 2, p. 47, 2017. DOI: https://doi.org/10.26555/jiteki.v3i2.7069

Downloads

Published

2021-02-27

How to Cite

[1]
G. R. Wicaksono and R. D. Puriyanto, “Programmable Logic Controller (PLC) Based Paint Viscosity Control System”, Buletin Ilmiah Sarjana Teknik Elektro, vol. 3, no. 1, pp. 1–9, Feb. 2021.

Issue

Section

Artikel