Development of Integrated Welding Jobsheet Production Based Learning in Vocational High School
DOI:
https://doi.org/10.12928/joves.v6i1.7654Keywords:
jobsheet, production based learning, welding, addieAbstract
This study aims to analyze the use of integrated welding jobsheets that are usually done at SMK Muhammadiyah 2 Ajibarang. After analyzing and then developing the use of an integrated welding jobsheet commonly used at SMK Muhammadiyah 2 Ajibarang, it becomes an integrated jobsheet that is combined with existing work orders in the industry. The use of the jobsheet was developed to increase the knowledge and competence of students in the Machining Engineering skill competency. This research is research and development (R&D). Stages of research using the design Analysis, Design, Development, Implementation, Evaluation. This research was conducted at SMK Muhammadiyah 2 Ajibarang. The subjects in this study were grade 12 students of Machining Engineering Skills at SMK Muhammadiyah 2 Ajibarang. This study uses a quasi-experimental nonequivalent control group design research method. Collecting data using a questionnaire, pretest, posttest. This study uses expert validators to validate the integrated jobsheet that will be developed, where the average validation result of the three expert validators is 4.25 or 80.5% which can be declared valid. Analysis of research data was done by using the validity of the questionnaire and T-test. To compare the achievement results in the class before being given practical treatment using an integrated worksheet and after being given treatment. We can test this comparison by means of different power testing carried out by pretest and posttest. The result of this research is that the use of integrated welding jobsheet can increase students' knowledge and competence. This study shows an increase in knowledge and competence, after being treated three times by using the use of an integrated worksheet that has been combined with a work order with (Tcount = 11.224 and Sig. = 0.000). The results presented in the form of data analysis are the results of research that has gone through several stages. Integrated jobsheet development research is able to increase students' knowledge and competence of Machining Engineering skills. The Integrated Jobsheet is declared valid to assist the learning process of welding practice in production-based learning in order to increase knowledge and competence.
References
Branch, R. M. (2009). Instructional design: The ADDIE approach (Vol. 722). Springer Science & Business Media.
Burke, B. (2005). Competency Based Education and Training. London: Taylor and Francis e-Library
Lasmi, A., & Nawawi, Z. M. (2023). Praksis Pembelajaran Kewirausahaan pada Unit Produksi Jasa Boga. ManBiz: Journal of Management and Business, 2(2), 138-145.
Malik, A. (2019). Tingkat kesesuaian soal teori uji kompetensi keahlian teknik gambar bangunan dengan standar kompetensi nasional bidang gambar bangunan. Jurnal Pendidikan Teknik Sipil, 1(1).
Nuri, N., & Rusilowati, A. (2018). Pembelajaran Berbasis Produksi sebagai Upaya Peningkatan Keterampilan Produktifitas Siswa SMK. Physics Communication, 2(1), 46-51.
Pracihara, B. (2017, October). Instruksi Presiden No 9 Tahun 2016 (Revitalisasi Smk) Memacu Smk Bidang Seni dan Industri Kreatif dalam Pengembangan Ekonomi Kreatif. In Seminar Nasional Seni dan Desain 2017 (pp. 313-319). State University of Surabaya.
Prasetyo, G. H., & Said, S. R. (2017). Kelayakan sarana prasarana pada program jurusan teknik pemesinan smk nasional berbah sleman. Jurnal Pendidikan Vokasional Teknik Mesin, 5(3), 223-228.
Ramadhan, A. (2016). Penguasaan kompetensi teknik pengelasan smaw siswa kelas xi teknik pengelasan smk n 2 wonosari. Jurnal Pendidikan Vokasional Teknik Mesin, 4(6), 423-432.
Suhardi, D., Basem, Z., & Supardi, S. (2022). The Effect of Leadership And Motivation On Teacher Performance At Smk Negeri 1 Bangkinang. Jurnal Riset Manajemen Indonesia, 4(1), 126-136.
Suryadi, D., & Yusa, A. A. (2009). Model pembelajaran berbasis produksi dengan pendekatan asesmen portofolio pada perkuliahan praktik kerja bangunan. Jurnalpenelitian, 9.
Trianto. (2009). Mendesain Model PembelajaranInovatifProgresif. Jakarta: Kencana.
Wibowo, W. (2012). Manajemen Kinerja. Jakarta: Raja GrafindoPersada.
Wilkins, S , 2001. Human Resource Development through Vocational Education in the United Arab Emirates. Journal of Vocational Education and Training, ISSN 1363-6820
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Universitas Ahmad Dahlan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Journal of Vocational Education Studies (JOVES) agree to the following terms: Authors retain the copyright and grant the Universitas Ahmad Dahlan right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgement of the work's authorship and initial publication in Universitas Ahmad Dahlan. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Universitas Ahmad Dahlan. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).