Development of Occupational Safety and Health Guidelines Using Quick Response Code on Land Measuring Tools for Students Vocational

Authors

  • Muhammad Nur Fuad Universitas Negeri Malang
  • Rini Kusumawardani Universitas Negeri Semarang
  • Eko Supraptono Universitas Negeri Semarang
  • Yeri Sutopo Universitas Negeri Semarang
  • Sri Handayani Universitas Negeri Semarang

DOI:

https://doi.org/10.12928/joves.v9i1.13031

Keywords:

Guide, Occupational Safety and Health, QR Code, Land Survey, Vocational High School

Abstract

In 2023, Indonesia recorded 370,747 work accident cases across various sectors, with the construction sector contributing the highest percentage at 40%. Many accidents are caused by limited understanding and low compliance with Occupational Safety and Health (OSH) procedures. Improving OSH understanding can be achieved through education, especially in vocational schools. SMK Negeri 3 Semarang has implemented an independent curriculum with a teaching factory system, but there is still no systematic OSH guide for soil measurement learning. Therefore, this study aims to develop a more structured and innovative QR Code-assisted OSH guide for soil measurement.This research used the Research and Development (R&D) method with the ADDIE model. The sample consisted of 70 Phase E students from the Construction and Housing Engineering program. Data analysis included validation by material experts and media experts to determine feasibility, practicality tests through teacher and student questionnaires, and effectiveness tests using pretest and posttest results. The data were first tested for normality and homogeneity before being analyzed using the T-Test and N-Gain test. The results showed that both material and media expert validations reached 91%, while the practicality test scored 92%. The effectiveness test produced an N-Gain score of 79%, categorized as effective. These findings indicate that the QR Code-assisted soil measurement OSH guide is feasible, practical, and effective in improving students’ understanding and implementation of OSH procedures.

References

Total Referensi: 26 sumber

Ahmad, M., & Susilawati. (2023). Penerapan budaya keselamatan dan kesehatan kerja (K3) di laboratorium pendidikan kimia Madrasah Aliyah Negeri (MAN) Pematang Siantar. Jurnal Ilmu Komputer, Ekonomi, dan Manajemen (JIKEM), 3(2), 2734–2741.

Antao, P., Calderon, M., Puig, M., Michail, A., Wooldridge, C., & Darbra, R. M. (2016). Identification of occupational health, safety, security (OHSS) and environmental performance indicators in port areas. Safety Science, 85, 266–275. https://doi.org/10.1016/j.ssci.2015.12.031

Arikunto, S. (2014). Evaluasi program pendidikan. Bumi Aksara.

Babu, N., & Kohli, P. (2023). Commentary: Reliability in research. Indian Journal of Ophthalmology, 71(2), 400–401. https://doi.org/10.4103/ijo.IJO_2016_22

Badan Standar Kurikulum dan Asesmen Pendidikan. (2022). Capaian pembelajaran mata pelajaran dasar-dasar teknik konstruksi dan perumahan fase E untuk SMK/MAK. Kepmendikbudristek.

Hasibuan, A., Purba, B., Marzuki, I., Sianturi, M. E., Armus, R., Gusty, S., Sitorus, M. C., Khariri, Bachtiar, E., Susilawaty, A., & Jamaludin. (2020). Teknik keselamatan dan kesehatan kerja. Yayasan Kita Menulis.

Ikhtiar, M., Imaduddin, F. M., & Fachrin, A. S. (2024). Hubungan program kesehatan dan keselamatan kerja (K3) dengan produktivitas kerja. Higiene, 10(1), 50–57.

Indonesia Safety Center. (2024, October 2). Kecelakaan kerja di Indonesia: Data, penyebab, dan upaya pencegahan. Indonesia Safety Center (ISC).

Kementerian Ketenagakerjaan Republik Indonesia. (2024). Kecelakaan kerja tahun 2023. In Data prioritas ketenagakerjaan SDI 2023.

Kucukarslan, A. B., Koksal, M., & Ekmekci, I. (2023). A model proposal for measuring performance in occupational health and safety in forest fires. Sustainability, 15(20), 14729. https://doi.org/10.3390/su152014729

Lingard, H. (2013). Occupational health and safety in the construction industry. Construction Management and Economics, 31(6), 505–514. https://doi.org/10.1080/01446193.2013.816435

Mahawati, E., Fitriyatinur, Q., Yanti, A. C., Rahayu, P. P., Aplilliani, C., & Chaerul, M. (2021). Keselamatan kerja dan kesehatan lingkungan industri (R. Watrianthos & J. Simartama, Eds.). Yayasan Kita Menulis.

Moosa, M. M., Oriet, L. P., & Khamaj, A. M. (2020). Measuring the causes of Saudi Arabian construction accidents: Management and concerns. International Journal of Occupational Safety and Health, 10(2), 108–114. https://doi.org/10.3126/ijosh.v10i2.33282

Muzayanah, & Budianto, E. (2020). Ilmu ukur tanah. Unesa University Press.

Nazir, M. (2005). Metode penelitian. Ghalia Indonesia.

Noor, I. H. M., Sumantri, D., Irmawati, A., & Juanita, F. (2019). Revitalisasi SMK dalam meningkatkan kompetensi dan keterampilan lulusan untuk memanfaatkan sumber daya alam lokal. Pusat Penelitian Kebijakan Pendidikan dan Kebudayaan, Badan Penelitian dan Pengembangan, Kementerian Pendidikan dan Kebudayaan.

Prameswari, H. D., & Cahyadi, N. (2024). Analisis penerapan keselamatan dan kesehatan kerja (K3) pada proyek konstruksi PT. XYZ di Kota Gresik. Jurnal Manajemen Kompeten, 7(1), 1–11.

Prianto, A., Winardi, & Qomariyah, O. N. (2019). Pengaruh penerapan teaching factory dan keterlibatan dalam pembelajaran terhadap kesiapan kerja lulusan SMK. Conference on Research & Community Services, 1(1), 968–991.

Republik Indonesia. (1970). Undang-Undang Republik Indonesia Nomor 1 Tahun 1970 tentang keselamatan kerja.

Republik Indonesia. (2003). Undang-Undang Republik Indonesia Nomor 20 Tahun 2003 tentang sistem pendidikan nasional.

Riani, E. C., Thoha, A., Amini, A., & Hijjah, N. (2022). Development of e-module K3 and employment law. PROBILITAS, 1(2), 4–8. https://doi.org/10.54482/PROBILITAS/

Sastrini, Y. E., Pertiwi, G. H., & Khoiri, M. M. (2023). Kesehatan dan keselamatan kerja: Tinjauan komprehensif. Tahta Media Group.

Sudaryono. (2016). Metode penelitian pendidikan. Prenada Media.

Sugiyono. (2020). Metode penelitian dan pengembangan. CV Alfabeta.

Sutjipto. (2019). Perancangan kurikulum sekolah menengah kejuruan sebagai pranata budaya kerja. Jurnal Pendidikan dan Kebudayaan, 4(1), 102–126.

Vatankhah Barenji, A., Garcia, J. E., & Montreuil, B. (2024). A modular XR collaborative platform for occupational safety and health training: A case study in circular logistics facilities. Information, 15(9), 570. https://doi.org/10.3390/info15090570

Downloads

Published

2026-05-23

Issue

Vol. 9 No. 1 (2026): Vol 9 No 1

Section

Articles

License

Copyright (c) 2026 Universitas Ahmad Dahlan

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with Journal of Vocational Education Studies (JOVES) agree to the following terms: Authors retain the copyright and grant the Universitas Ahmad Dahlan right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgement of the work's authorship and initial publication in Universitas Ahmad Dahlan. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Universitas Ahmad Dahlan. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).