PCB (Printed Circuit Board) Etching Machine Using ESP32-Camera Based Internet of Things
DOI:
https://doi.org/10.12928/biste.v5i2.8132Keywords:
ESP32-Cam, Etching, FeCl3, Internet of Things, Printed Circuit Board, Real Time Clock, TelegramAbstract
The most important factor in the PCB etching process is timeliness and minimizing work on users. Because in general, the PCB etching process itself is still done manually and there is no timeliness and good results. So, the PCB etching machine tool using Internet of Things based Esp32-Cam is made for users in the PCB etching process. Users can monitor the etching process of the internet of things system using telegram. In the telegram there is a choice of time to carry out the etching process. The components used in this tool power supply as a power source in this tool uses a voltage of 5vdc, Esp32-Cam as a microcontroller, camera features on Esp32-Cam as a photo sender after the etching process time has been completed, RTC (Real Time Clock) as a timer for the PCB etching process, servo motor as a box drive containing water and PCB when the etching process time is selected. The conclusion of the results of this tool is that the device or tool works well and can help users on the PCB etching process efficiently, it's just that there are few challenges for the signal network due to delays in bad internet signals.
References
M. Rangraz and L. Pareto, "Workplace work-integrated learning: supporting industry 4.0 transformation for small manufacturing plants by reskilling staff," International Journal of Lifelong Education, vol. 40, no. 1, pp. 5-22, 2021, https://doi.org/10.1080/02601370.2020.1867249.
H. Yar, A. S. Imran, Z. A. Khan, M. Sajjad, and Z. Kastrati, "Towards smart home automation using IoT-enabled edge-computing paradigm," Sensors, vol. 21, no. 14, p. 4932, 2021, https://doi.org/10.3390/s21144932.
A. Hidayatno, A. R. Destyanto, C. A. Hulu, "Industry 4.0 technology implementation impact to industrial sustainable energy in Indonesia: A model conceptualization," Energy Procedia, vol. 156, pp. 227-233, 2019, https://doi.org/10.1016/j.egypro.2018.11.133.
M. C. Shilenge and A. Telukdarie, "Optimization of Operational and Information Technology Integration Towards Industry 4.0," 2022 IEEE 31st International Symposium on Industrial Electronics (ISIE), pp. 1076-1081, 2022, https://doi.org/10.1109/ISIE51582.2022.9831605.
W. S. Alaloul, M. S. Liew, N. A. W. A. Zawawi, I. B. Kennedy, "Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders," Ain shams engineering journal, vol. 11, no. 1, pp. 225-230, 2020, https://doi.org/10.1016/j.asej.2019.08.010.
M. K. Jackson Ramphela, P. A. Owolawi, T. Mapayi, and G. Aiyetoro, "Internet of Things (IoT) Integrated Data Center Infrastructure Monitoring System," 2020 International Conference on Artificial Intelligence, Big Data, Computing and Data Communication Systems (icABCD), pp. 1-6, 2020, https://doi.org/10.1109/icABCD49160.2020.9183873.
V. Mulloni and M. Donelli, "Chipless RFID sensors for the Internet of Things: Challenges and opportunities," Sensors, vol. 20, no. 7, p. 2135, 2020, https://doi.org/10.3390/s20072135.
L. Chettri and R. Bera, "A Comprehensive Survey on Internet of Things (IoT) Toward 5G Wireless Systems," in IEEE Internet of Things Journal, vol. 7, no. 1, pp. 16-32, Jan. 2020, https://doi.org/10.1109/JIOT.2019.2948888.
J. Qiu, Z. Tian, C. Du, Q. Zuo, S. Su, and B. Fang, "A Survey on Access Control in the Age of Internet of Things," in IEEE Internet of Things Journal, vol. 7, no. 6, pp. 4682-4696, June 2020, https://doi.org/10.1109/JIOT.2020.2969326.
R. S. El-Nasr, S. M. Abdelbasir, A. H. Kamel, and S. S. Hassan, "Environmentally friendly synthesis of copper nanoparticles from waste printed circuit boards," Separation and Purification Technology, vol. 230, p. 115860, 2020, https://doi.org/10.1016/j.seppur.2019.115860.
B. Budiana, N. S. Asaad, B. Sugandi, F. Nakul, V. Octowinandi, and M. T. Ginting, "The Effect of FC38 and FC34 as Etching Solutions on Multilayer PCB," 2020 3rd International Conference on Applied Engineering (ICAE), pp. 1-5, 2020, https://doi.org/10.1109/ICAE50557.2020.9350553.
K. Liu, M. Wang, D. C. Tsang, L. Liu, Q. Tan, and J. Li, "Facile path for copper recovery from waste printed circuit boards via mechanochemical approach," Journal of Hazardous Materials, vol. 440, p. 129638, 2022, https://doi.org/10.1016/j.jhazmat.2022.129638.
R. M. Atta, "Effect of applying air pressure during wet etching of micro copper PCB tracks with ferric chloride," International Journal of Materials Research, vol. 113, no. 9, pp. 795-808, 2022, https://doi.org/10.1515/ijmr-2021-8343.
R. J. Nill, "How to Select and Use Personal Protective Equipment," Handbook of Occupational Safety and Health, pp. 469-494, 2019, https://doi.org/10.1002/9781119581482.ch15.
F. V. Vasilyev, A. M. Medvedev, F. A. Barakovsky, and M. A. Korobkov, "Development of the digital site for chemical processes in the manufacturing of printed circuit boards," Inventions, vol. 6, no. 3, p. 48, 2021, https://doi.org/10.3390/inventions6030048.
A. Abbaspour, A. Jafari, D. S. Tarahomi, S. M. Mousavi, and R. Kharrat, "Production and characterization of a polysaccharide/polyamide blend from Pseudomonas atacamensis M7D1 strain for enhanced oil recovery application," International Journal of Biological Macromolecules, vol. 240, p. 124421, 2023, https://doi.org/10.1016/j.ijbiomac.2023.124421.
A. Otsuki, L. De La Mensbruge, A. King, S. Serranti, L. Fiore, and G. Bonifazi, "Non-destructive characterization of mechanically processed waste printed circuit boards-particle liberation analysis," Waste Management, vol. 102, pp. 510-519, 2020, https://doi.org/10.1016/j.wasman.2019.11.006.
C. Sassanelli, P. Rosa, and S. Terzi, "Supporting disassembly processes through simulation tools: A systematic literature review with a focus on printed circuit boards," Journal of Manufacturing Systems, vol. 60, pp. 429-448, 2021, https://doi.org/10.1016/j.jmsy.2021.07.009.
J. D. Urbano-Gámez,F. Perdigones, J. M. Quero, "Semi-Automatic Lab-on-PCB System for Agarose Gel Preparation and Electrophoresis for Biomedical Applications," Micromachines, vol. 12, no. 9, p. 1071, 2021, https://doi.org/10.3390/mi12091071.
A. R. Lellapati, B. K. Pidugu, M. S. R. Rangari, G. P. Acharya, and V. Jayaprakasan, "Development of Advanced Alerting System using Arduino interfaced with ESP32 CAM," 2022 IEEE 4th International Conference on Cybernetics, Cognition and Machine Learning Applications (ICCCMLA), pp. 261-266, 2022, https://doi.org/10.1109/ICCCMLA56841.2022.9988762.
R. B. Salikhov, V. K. Abdrakhmanov, and I. N. Safargalin, "Internet of things (IoT) security alarms on ESP32-CAM," In Journal of Physics: Conference Series, vol. 2096, no. 1, p. 012109, 2021, https://doi.org/10.1088/1742-6596/2096/1/012109.
R. Chauhan et al., "Design of Robotic Snake with ESP 32 CAM and Arduino," 2021 19th OITS International Conference on Information Technology (OCIT), pp. 6-9, 2021, https://doi.org/10.1109/OCIT53463.2021.00013.
S. Kumar, K. Sharma, G. Raj, D. Datta, and A. Ghosh, "Arduino and ESP32-CAM-based automatic touchless attendance system," In Proceedings of the 3rd International Conference on Communication, Devices and Computing: ICCDC 2021, pp. 135-144, 2022, https://doi.org/10.1007/978-981-16-9154-6_14.
P. W. Rusimamto, L. A. Endryansyah, R. Harimurti, and Y. Anistyasari, "Implementation of arduino pro mini and ESP32 cam for temperature monitoring on automatic thermogun IoT-based," Indones. J. Electr. Eng. Comput. Sci, vol. 23, no. 3, pp. 1366-1375, 2021, http://doi.org/10.11591/ijeecs.v23.i3.pp1366-1375.
C. Huda, F. A. Bachtiar, and A. A. Supianto, "Reporting Sleepy Driver into Channel Telegram via Telegram Bot," 2019 International Conference on Sustainable Information Engineering and Technology (SIET), pp. 251-256, 2019, https://doi.org/10.1109/SIET48054.2019.8986000.
M. R. Albrecht, L. Mareková, K. G. Paterson, and I. Stepanovs, "Four Attacks and a Proof for Telegram," 2022 IEEE Symposium on Security and Privacy (SP), pp. 87-106, 2022, https://doi.org/10.1109/SP46214.2022.9833666.
H. Ward, "The Real-Time Clock and the DS3231," In Introductory Programs with the 32-bit PIC Microcontroller, pp. 465-557, 2023, https://doi.org/10.1007/978-1-4842-9051-4_10.
G. Mussi, P. Frigerio, G. Gattere, and G. Langfelder, "A MEMS Real-Time Clock With Single-Temperature Calibration and Deterministic Jitter Cancellation," in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 68, no. 3, pp. 880-889, 2021, https://doi.org/10.1109/TUFFC.2020.3013976.
A. Perdomo-Campos, I. Vega-González, and J. Ramírez-Beltrán, "ESP32 Based Low-Power and Low-Cost Wireless Sensor Network," In The conference on Latin America Control Congress, pp. 275-285, 2023, https://doi.org/10.1007/978-3-031-26361-3_24.
S. I. Abdullahi, M. H. Habaebi, and N. A. Malik, "Capacitive electrode sensor implanted on a printed circuit board designed for continuous water level measurement," Bulletin of Electrical Engineering and Informatics, vol. 8, no. 2, pp. 450-459, 2019, https://doi.org/10.11591/eei.v8i2.1515.
L. Zhang and O. Zhao, “Experimental and numerical study of press-braked S690 high strength steel slender channel section columns prone to local–flexural interactive buckling,” Engineering Structures, vol. 264, p. 114468, 2022, https://doi.org/10.1016/j.engstruct.2022.114468.
G. Soni, S. S. Saini, S. S. Malhi, B. K. Srao, A. Sharma, and D. Puri, "Design and Implementation of Object Motion Detection Using Telegram," 2021 International Conference on Technological Advancements and Innovations (ICTAI), pp. 203-206, 2021, https://doi.org/10.1109/ICTAI53825.2021.9673226.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Adi Prasetyo, Jamaaluddin Jamaaluddin, Izza Anshory
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
