Advancements in Anode Materials for Cathodic Protection: Nanostructured Alloys, Surface Modifications, and Smart Monitoring
DOI:
https://doi.org/10.12928/biste.v6i3.11512Keywords:
Advanced Alloys, Nanostructured Materials, Surface Modifications, Mixed Metal Oxide (MMO), Smart Monitoring Systems, Corrosion ResistanceAbstract
This review critically examines advancements in anode materials for cathodic protection systems, focusing on overcoming the limitations of traditional materials like magnesium, zinc, aluminum, graphite, lead-silver alloys, and high-silicon cast iron (HSCI). Conventional anode materials, though widely used, face issues such as rapid degradation, high maintenance costs, and environmental harm. Novel materials, including mixed metal oxides (MMO), advanced aluminum-based alloys, nanostructured materials, and conductive polymers, offer superior electrochemical properties, enhanced durability, and improved performance in aggressive environments like seawater. This review also highlights the role of surface modifications and coatings, such as platinum on titanium and ceramic coatings, in boosting corrosion resistance. Moreover, smart monitoring systems, integrated with IoT and SCADA technologies, are explored for their potential to improve the longevity and efficiency of cathodic protection systems. The paper emphasizes the urgent need for sustainable solutions due to the substantial economic and environmental costs of corrosion, particularly in high-risk industries like oil and gas, maritime, and infrastructure. Future research directions, including the development of hybrid systems combining coatings with CP technologies and the application of advanced alloys and nanostructured materials, are proposed to address the long-term performance and ecological impacts of CP systems.
References
K. Yang, Z. Hu, X. Li, K. Nikolaev, G. Hong, N. Mamchik, I. Erofeev, U. Mirsaidov, A. Neto, D. Blackwood, D. Shchukin, M. Trushin, K. Novoselov, and D. Andreeva, "Graphene oxide-polyamine preprogrammable nanoreactors with sensing capability for corrosion protection of materials," Proc. Natl. Acad. Sci. USA, vol. 120, no. 35, p. e2307618120, 2023, https://doi.org/10.1073/pnas.2307618120.
B. Hou, X. Li, X. Ma, C. Du, D. Zhang, M. Zheng, W. Xu, D. Lu, and F. Ma, "The cost of corrosion in China," npj Mater. Degrad., vol. 1, pp. 1–10, 2017, https://doi.org/10.1038/s41529-017-0005-2.
S. Habib, R. Shakoor, and R. Kahraman, "A focused review on smart carriers tailored for corrosion protection: Developments, applications, and challenges," Prog. Org. Coat., vol. 154, p. 106218, 2021, https://doi.org/10.1016/j.porgcoat.2021.106218.
Wei, X. Xie, Z. Wen, H. Zheng, H. Lan, H. Shao, and S. T. Lee, "Triboelectric nanogenerator-driven self-powered photoelectrochemical water splitting based on hematite photoanodes," ACS Nano, vol. 12, no. 8, pp. 8625–8632, 2018, https://doi.org/10.1021/acsnano.8b04363.
F. Varela, M. Y. J. Tan, and M. Forsyth, "Understanding the effectiveness of cathodic protection under disbonded coatings," Electrochim. Acta, vol. 186, pp. 377–390, 2015, https://doi.org/10.1016/j.electacta.2015.10.171.
L. Xu, Y. Xin, L. Ma, H. Zhang, Z. Lin, and X. Li, "Challenges and solutions of cathodic protection for marine ships," Corros. Commun., vol. 2, pp. 33–40, 2021, https://doi.org/10.1016/j.corcom.2021.08.003.
N. Martin and A. Mohamed, “Sustainable Corrosion Prevention System of Steel Structures,” Evolutionary Manufacturing, Design and Operational Practices for Resource and Environmental Sustainability, pp. 193-202, 2024, https://doi.org/10.1002/9781394198221.ch17.
Byrne, N. Holmes, and B. Norton, "State-of-the-art review of cathodic protection for reinforced concrete structures," Mag. Concr. Res., vol. 68, pp. 664–677, 2016, https://doi.org/10.1680/jmacr.15.00083.
F. Wang, J. Xu, Y. Xu, L. Jiang, and G. Ma, "A comparative investigation on cathodic protections of three sacrificial anodes on chloride-contaminated reinforced concrete," Constr. Build. Mater., vol. 246, p. 118476, 2020, https://doi.org/10.1016/j.conbuildmat.2020.118476.
S. M. Bashi, N. F. Mailah, and M. M. Radzi, "Cathodic protection system," in Proc. Natl. Power Eng. Conf., PECon 2003, pp. 366–370, 2003, https://doi.org/10.1109/PECON.2003.1437476.
K. Wilson, M. Jawed, and V. Ngala, "The selection and use of cathodic protection systems for the repair of reinforced concrete structures," Constr. Build. Mater., vol. 39, pp. 19–25, 2013, https://doi.org/10.1016/j.conbuildmat.2012.05.037.
S. Rossi, P. L. Bonora, R. Pasinetti, L. Benedetti, M. Draghetti, and E. Sacco, "Laboratory and field characterization of a new sacrificial anode for cathodic protection of offshore structures," Corrosion, vol. 54, no. 12, pp. 1018–1025, 1998, https://doi.org/10.5006/1.3284815.
N. Abdulwahab, A. Abed, and M. Jaber, "Real-time remote monitoring and control system for underground pipelines," International Journal of Electrical and Computer Engineering, vol. 12, no. 5, pp. 4892–4902, 2022, https://doi.org/10.11591/ijece.v12i5.pp4892-4902.
C. Rousseau, F. Baraud, L. Leleyter, and O. Gil, "Cathodic protection by zinc sacrificial anodes: Impact on marine sediment metallic contamination," J. Hazard. Mater., vol. 167, nos. 1–3, pp. 953–958, 2009, https://doi.org/10.1016/j.jhazmat.2009.01.083.
J. M. Ha, J. A. Jeong, and C. Jin, “Development of Conductive Mortar for Efficient Sacrificial Anode Cathodic Protection of Reinforced Concrete Structures—Part 2: Four-Year Performance Evaluation in Bridges,” Applied Sciences, vol. 14, no. 5, p. 1797, 2024, https://doi.org/10.3390/app14051797.
E. McCafferty. Introduction to Corrosion Science. New York, NY, USA: Springer Science & Business Media. 2010. https://doi.org/10.1007/978-1-4419-0455-3.
S. Habib, R. Shakoor, and R. Kahraman, "A focused review on smart carriers tailored for corrosion protection: Developments, applications, and challenges," Prog. Org. Coat., vol. 154, p. 106218, 2021, https://doi.org/10.1016/j.porgcoat.2021.106218.
J. Jeong and C. Jin, "Characteristic of CP potential for concrete pile specimen with hybrid CP," Adv. Mater. Res., vol. 685, pp. 3–7, 2013, https://doi.org/10.4028/www.scientific.net/AMR.685.3.
S. S. Pathak, S. K. Mendon, M. D. Blanton, and J. W. Rawlins, "Magnesium-based sacrificial anode cathodic protection coatings (Mg-rich primers) for aluminum alloys," Metals, vol. 2, no. 3, pp. 353–376, 2012, https://doi.org/10.3390/met2030353.
H. M. Oleiwi, et al., “An experimental study of cathodic protection for chloride contaminated reinforced concrete,” Materials and structures, vol. 51, pp. 1-11, 2018, https://doi.org/10.1617/s11527-018-1273-1.
P. Lambert, et al., "Dual function carbon fibre fabric strengthening and impressed current cathodic protection (ICCP) anode for reinforced concrete structures," Mater. Struct., vol. 48, no. 7, pp. 2157–2167, 2015, https://doi.org/10.1617/s11527-014-0300-0.
G. Banda, G. Santos, I. Gonzaga, A. Dória, and K. Eguiluz, "Developments in electrode materials for wastewater treatment," Curr. Opin. Electrochem., vol. 26, p. 100663, 2021, https://doi.org/10.1016/j.coelec.2020.100663.
Y. Liu and X. Shi, "Cathodic protection technologies for reinforced concrete: Introduction and recent developments," Rev. Chem. Eng., vol. 25, pp. 339–388, 2009, https://doi.org/10.1515/REVCE.2009.25.5-6.339.
V. Krstić and B. Pešovski, "Reviews the research on some dimensionally stable anodes (DSA) based on titanium," Hydrometallurgy, 2019, https://doi.org/10.1016/j.hydromet.2019.01.018.
I. Gonzaga et al., "Microwave synthesis of Ti/(RuO2)0.5(IrO2)0.5 anodes: Improved electrochemical properties and stability," Journal of Electroanalytical Chemistry, vol. 874, p. 114460, 2020, https://doi.org/10.1016/j.jelechem.2020.114460.
M. Campos, C. Blawert, N. Scharnagl, M. Störmer, and M. Zheludkevich, "Cathodic Protection of Mild Steel Using Aluminum-Based Alloys," Materials, vol. 15, 2022, https://doi.org/10.3390/ma15041301.
A. Azarniya, A. Taheri, and K. Taheri, "Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective," Journal of Alloys and Compounds, 2019, https://doi.org/10.1016/j.jallcom.2018.11.286.
F. Presuel-Moreno, M. Jakab, N. Tailleart, M. Goldman, and J. Scully, "Corrosion-resistant metallic coatings," Materials Today, vol. 11, pp. 14-23, 2008, https://doi.org/10.1016/S1369-7021(08)70203-7.
R. Figueira, "Hybrid Sol–gel Coatings for Corrosion Mitigation: A Critical Review," Polymers, vol. 12, 2020, https://doi.org/10.3390/polym12030689.
K. Zhang et al., "Nanostructured Mn-based oxides for electrochemical energy storage and conversion," Chemical Society Reviews, vol. 44, no. 3, pp. 699-728, 2015, https://doi.org/10.1039/C4CS00218K.
S. Siwal, Q. Zhang, N. Devi, and V. Thakur, "Carbon-Based Polymer Nanocomposite for High-Performance Energy Storage Applications," Polymers, vol. 12, 2020, https://doi.org/10.3390/polym12030505.
O. Prokhorov et al., "Complete Integrated Automation of the Electrochemical Corrosion Protection System of Pipelines Based on IoT and Big Data Analytics," Computation, vol. 10, p. 123, 2022, https://doi.org/10.3390/computation10070123.
I. Mekki et al., "Design of a Printed Circuit Board for Real-time Monitoring and Control of the Pipeline’s Cathodic Protection System via IoT and a Cloud Platform," International Journal of Engineering, 2023, https://doi.org/10.5829/IJE.2023.36.09C.11.
N. Abdulwahab, Abed, and M. Jaber, "Real-time remote monitoring and control system for underground pipelines," International Journal of Electrical and Computer Engineering (IJECE), 2022, https://doi.org/10.11591/ijece.v12i5.pp4892-4902.
A. Priyadarshan, "Optimizing Corrosion Protection: A Data-Driven Approach to Impressed Current Cathodic Protection (ICCP) Systems for Large Crude Carriers," Abu Dhabi International Petroleum Exhibition and Conference (p. D031S112R003, 2023, https://doi.org/10.2118/217054-MS.
X. Gao et al., "Three‐Dimensional Manganese Oxide@Carbon Networks as Free‐Standing, High‐Loading Cathodes for High‐Performance Zinc‐Ion Batteries," Small Structures, vol. 4, 2023, https://doi.org/10.1002/sstr.202200316.
Y. Li, L. Wen, and W. Guo, "A guide to organic electro reduction using sacrificial anodes," Chemical Society Reviews, vol. 52, no. 4, pp. 1168-1188, 2023, https://doi.org/10.1039/D3CS00009E.
W. Li, T. Liu, D. Zou, J. Wang, and T. Yi, "PZT based smart corrosion coupon using electromechanical impedance," Mechanical Systems and Signal Processing, vol. 129, pp. 455-469, 2019, https://doi.org/10.1016/j.ymssp.2019.04.049.
X. Frias-Cacho, M. Castro, D. Nguyen, A. Grolleau, and J. Feller, "A Review of In-Service Coating Health Monitoring Technologies: Towards ‘Smart’ Neural-Like Networks for Condition-Based Preventive Maintenance," Coatings, vol. 12, no. 5, p. 565, 2022, https://doi.org/10.3390/coatings12050565.
L. Xu et al., "Challenges and Solutions of Cathodic Protection for Marine Ships," Corrosion Communications, vol. 2, pp. 33-40, 2021, https://doi.org/10.1016/j.corcom.2021.08.003.
I. Gurrappa, I. V. S. Yashwanth, and I. Mounika, “Cathodic protection technology for protection of naval structures against corrosion,” Proceedings of the national academy of sciences, India section A: Physical sciences, vol. 85, pp. 1-18, 2015, https://doi.org/10.1007/s40010-014-0182-0.
E. S. Ameh and S. C. Ikpeseni, "Pipelines cathodic protection design methodologies for impressed current and sacrificial anode systems," Nigerian Journal of Technology, vol. 36, no. 4, pp. 1072-1077, 2017, https://doi.org/10.4314/njt.v36i4.12.
F. Al-Kharafi and W. Badawy, "Corrosion and passivation of Al and Al-Si alloys in nitric acid solutions II—Effect of chloride ions," Electrochimica Acta, vol. 40, pp. 1811-1817, 1995, https://doi.org/10.1016/0013-4686(95)00091-R.
R. W. Erickson and D. Maksimovic. Fundamentals of power electronics. Springer Science & Business Media. 2007. https://books.google.co.id/books?hl=id&lr=&id=B4XhBwAAQBAJ.
S. Ebrahimi, N. Amiri, L. Wang, and J. Jatskevich, "Parametric average-value modeling of thyristor-controlled rectifiers with internal faults and asymmetrical operation," IEEE Transactions on Power Delivery, vol. 34, no. 2, pp. 773-776, 2019, https://doi.org/10.1109/TPWRD.2018.2880616.
L. Zhao et al., "Zero-voltage and zero-current switching dual-transformer-based full-bridge converter with current doubler rectifier," IEEE Transactions on Power Electronics, vol. 35, no. 12, pp. 12949-12958, 2020, https://doi.org/10.1109/TPEL.2020.2997017.
C. Dong, A. Fu, X. Li, and Y. Cheng, "Localized EIS characterization of corrosion of steel at coating defect under cathodic protection," Electrochimica Acta, vol. 54, pp. 628-633, 2008, https://doi.org/10.1016/j.electacta.2008.07.016.
J. Davis, G. Dorémus, and W. Graham, "The Influence of Environment on Corrosion and Cathodic Protection," Journal of Petroleum Technology, vol. 24, no. 03, pp. 323-328, 1972, https://doi.org/10.2118/3417-PA.
M. Dugarte and A. Sagüés, "Accounting for Temperature Effects on an Evolving Galvanic Anode Cathodic Protection System for Steel in Concrete," Corrosion, vol. 72, p. 1469, 2016, https://doi.org/10.5006/2156.
H. Abdel-Kader and S. El-Raghy, "Wear-corrosion mechanism of stainless steel in chloride media," Corrosion Science, vol. 26, pp. 647-653, 1986, https://doi.org/10.1016/0010-938X(86)90029-6.
N. Martin and A. Mohamed, "Sacrificial Anodes and Environmental Effects," Evolutionary Manufacturing, Design and Operational Practices for Resource and Environmental Sustainability, pp. 81-106, 2024, https://doi.org/10.1002/9781394198221.ch7.
Y. Jiang et al., "Anodic oxidation for the degradation of organic pollutants: Anode materials, operating conditions and mechanisms," Electrochemistry Communications, vol. 123, p. 106912, 2021, https://doi.org/10.1016/j.elecom.2020.106912.
X. Yang et al., "Sustainable and reagent-free cathodic precipitation for high-efficiency removal of heavy metals from soil leachate," Environmental Pollution, vol. 320, p. 121002, 2023, https://doi.org/10.2139/ssrn.4272722.
M. Ganzoury, S. Ghasemian, N. Zhang, M. Yagar, and C. Lannoy, "Mixed metal oxide anodes used for the electrochemical degradation of a real mixed industrial wastewater," Chemosphere, vol. 286, no. 1, p. 131600, 2021. https://doi.org/10.1016/j.chemosphere.2021.131600.
D. Shao, W. Lyu, J. Cui, X. Zhang, Y. Zhang, G. Tan, and W. Yan, "Polyaniline nanoparticles magnetically coated Ti/Sb-SnO₂ electrode as a flexible and efficient electrocatalyst for boosted electrooxidation of biorefractory wastewater," Chemosphere, vol. 241, p. 125103, 2020, https://doi.org/10.1016/j.chemosphere.2019.125103.
C. Cionti, C. Pina, D. Meroni, E. Falletta, and S. Ardizzone, "Photocatalytic and Oxidative Synthetic Pathways for Highly Efficient PANI-TiO₂ Nanocomposites as Organic and Inorganic Pollutant Sorbents," Nanomaterials, vol. 10, 2020, https://doi.org/10.3390/nano10030441.
M. Ganzoury, C. Chidiac, J. Kurtz, and C. Lannoy, "CNT-sorbents for heavy metals: Electrochemical regeneration and closed-loop recycling," Journal of Hazardous Materials, vol. 393, p. 122432, 2020, https://doi.org/10.1016/j.jhazmat.2020.122432.
A. W. Peabody. Control of pipeline corrosion. Houston, TX, USA: NACE International, The Corrosion Society. 1967. https://trid.trb.org/View/448663.
K. Chandrasekaran, M. Rajendran, A. Krishnavelayutham, R. Arulliah, and M. Subbiah, "Understanding the impact of water chemistry on electrode surface during cathodic protection in industrial cooling water system," Surfaces and Interfaces, vol. 26, p. 101294, 2021, https://doi.org/10.1016/j.surfin.2021.101294.
J. S. Oh and J. D. Kim, "A new protection strategy of impressed current cathodic protection for ships," KSME International Journal, vol. 18, no. 4, pp. 592-596, 2004, https://doi.org/10.1007/BF02983643.
J. Carson, "Zinc as a Self-Regulating Galvanic Anode For Ship Hulls," Corrosion, vol. 16, 1960, https://doi.org/10.5006/0010-9312-16.10.99.
R. Brueckner, R. Cobbs, and C. Atkins, "A review of developments in cathodic protection systems for reinforced concrete structures," MATEC Web of Conferences, vol. 361, p. 02001, 2022, https://doi.org/10.1051/matecconf/202236102001.
D. Tamhane, J. Thalapil, S. Banerjee, and S. Tallur, "Smart Cathodic Protection System for Real-Time Quantitative Assessment of Corrosion of Sacrificial Anode Based on Electro-Mechanical Impedance (EMI)," IEEE Access, vol. 9, pp. 12230-12240, 2020, https://doi.org/10.1109/ACCESS.2021.3051953.
I. Mekki, A. Kessar, R. Mouaz, M. Ahmed, E. M’Naouer, and A. Oran, "Design of a Printed Circuit Board for Real-time Monitoring and Control of Pipeline’s Cathodic Protection System via IoT and a Cloud Platform," International Journal of Engineering, vol. 36, no. 9, pp. 1667-1676, 2023, https://doi.org/10.5829/IJE.2023.36.09C.11.
C. Mgbemena, D. Onuoha, C. Mgbemena, and M. Obi, "Development of a Digitalised Remote Monitoring Device For Predictive Maintenance of Pipeline Cathodic Protection Systems," in 2023 28th International Conference on Automation and Computing (ICAC), pp. 1-7, 2023, https://doi.org/10.1109/ICAC57885.2023.10275263.
M. Wongkhan, J. Thitasino, and P. Chaitragul, "Cathodic Protection Remote Monitoring via LoRaWAN Technology of Water Pipelines," in 2023 3rd International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME), pp. 1-6, 2023, https://doi.org/10.1109/ICECCME57830.2023.10252729.
K. Herlambang, I. Wibowo, and M. Junaedi, "Cathodic Protection Online Monitoring Using a Low Power Wide Area Network Communication System," Natural Sciences Engineering and Technology Journal, vol. 3, no. 2, pp. 224-231 2023. https://doi.org/10.37275/nasetjournal.v3i2.38.
V. Blaricum, W. Norris, J. Bushman, and M. Szeliga, "Low-Maintenance Remotely Monitored Cathodic Protection Systems," 2001, https://doi.org/10.21236/ADA403169.
V. L. Van Blaricum. Demonstration of Remote Monitoring Technology for Cathodic Protection Systems: Phase II. DIANE Publishing. 1997. https://books.google.co.id/books?hl=id&lr=&id=kw9gPlPV3RIC.
F. Abate, D. Caro, G. Leo, and A. Pietrosanto, "Towards a distributed monitoring system for gas pipeline cathodic protection," in 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), pp. 1-6, 2018, https://doi.org/10.1109/I2MTC.2018.8409642.
D. Bailey, Practical SCADA for Industry, 1st ed., Elsevier, UK, 2003. https://doi.org/10.1016/B978-075065805-8/50001-5.
M. S. Khan, F. K. Kakar, S. Khan, and S. O. Athar, “Efficiency and cost analysis of power sources in impressed current cathodic protection system for corrosion prevention in buried pipelines of Balochistan, Pakistan,” In IOP Conference Series: Materials Science and Engineering, vol. 414, no. 1, p. 012034, 2018, https://doi.org/10.1088/1757-899X/414/1/012034.
E. Balla, "System Identification Modelling and IMC Based PID Control of Impressed Current Cathodic Protection Systems," International Journal on Smart Sensing and Intelligent Systems, vol. 6, no. 5, pp. 2055-2074, 2013, https://doi.org/10.21307/ijssis-2017-627.
G. Parthiban, T. Parthiban, R. Ravi, V. Saraswathy, N. Palaniswamy, and V. Sivan, "Cathodic protection of steel in concrete using magnesium alloy anode," Corrosion Science, vol. 50, pp. 3329-3335, 2008, https://doi.org/10.1016/j.corsci.2008.08.040.
M. Narozny, K. Zakowski, and K. Darowicki, "Method of sacrificial anode transistor-driving in a cathodic protection system," Corrosion Science, vol. 88, pp. 275–279, 2014, https://doi.org/10.1016/j.corsci.2014.07.041.
R. Norsworthy, “Understanding corrosion in underground pipelines: basic principles,” In Underground Pipeline Corrosion, pp. 3-34, 2014, https://doi.org/10.1533/9780857099266.1.3.
G. K. Glass, A. C. Roberts, and N. Davison, "Hybrid corrosion protection of chloride-contaminated concrete," Proceedings of the Institution of Civil Engineers-Construction Materials, vol. 161, no. 4, pp. 163-172, 2008, https://doi.org/10.1680/coma.2008.161.4.163.
A. Farooq, M. Hamza, Q. Ahmed, and K. Deen, "Evaluating the performance of zinc and aluminum sacrificial anodes in artificial seawater," Electrochimica Acta, vol. 314, pp. 135-141, 2019, https://doi.org/10.1016/j.electacta.2019.05.067.
J. Perkins, W. Luebke, K. Graham, and J. Todd, "Anodic Corrosion of Zinc Alloys in Seawater," Journal of The Electrochemical Society, vol. 124, pp. 819-826, 1977, https://doi.org/10.1149/1.2133419.
A. Bell, M. Au, J. Regnery, M. Schmid, B. Meermann, G. Reifferscheid, T. Ternes, and S. Buchinger, "Does galvanic cathodic protection by aluminum anodes impact marine organisms?" Environmental Sciences Europe, vol. 32, pp. 1-11, 2020, https://doi.org/10.1186/s12302-020-00441-3.
Hameed, K. W., Yaro, A. S., & Khadom, A. A. (2016). Mathematical model for cathodic protection in a steel-saline water system. Journal of Taibah University for Science, vol. 10, no. 1, pp. 64-69, 2016, https://doi.org/10.1016/j.jtusci.2015.04.002.
S. A. Galedari, A. Mahdavi, F. Azarmi, Y. Huang, and A. McDonald, "A comprehensive review of corrosion resistance of thermally-sprayed and thermally-diffused protective coatings on steel structures," Journal of Thermal Spray Technology, vol. 28, pp. 645-677, 2019, https://doi.org/10.1007/s11666-019-00855-3.
E. Satô, "Studies of lead alloy anode for cathodic protection (3rd report): Determination of the most suitable adding amount of silver," Corrosion Engineering, vol. 9, pp. 436-439, 1960, https://doi.org/10.3323/jcorr1954.9.10_436.
J. H. Morgan, "Lead alloy anode for cathodic protection," Anti-Corrosion Methods and Materials, vol. 5, pp. 347-352, 1958, https://doi.org/10.1108/eb019509.
L. Xu et al., “Challenges and solutions of cathodic protection for marine ships,” Corrosion Communications, vol. 2, pp. 33-40, 2021, https://doi.org/10.1016/j.corcom.2021.08.003.
C. Googan. Marine Corrosion and Cathodic Protection. CRC Press. 2022. https://doi.org/10.1201/9781003216070.
X. Li, A. Colclasure, D. Finegan, D. Ren, Y. Shi, X. Feng, L. Cao, Y. Yang, and K. Smith, "Degradation mechanisms of high capacity 18650 cells containing Si-graphite anode and nickel-rich NMC cathode," Electrochimica Acta, vol. 297, pp. 1109-1120, 2019. https://doi.org/10.1016/j.electacta.2018.11.194.
S. Kotov, S. Muzafarova, M. Livintsova, L. Baturova, and Y. Kuzmich, "The research of the processes and properties of anodes for the cathodic protection of the thermally expanded graphite," Materials Today: Proceedings, vol. 30, pp. 794-797, 2020. https://doi.org/10.1016/j.matpr.2020.01.573.
M. Parker and E. G. Peattie. Pipeline Corrosion and Cathodic Protection: A Practical Manual for Corrosion Engineers, Technicians, and Field Personnel. Gulf Professional Publishing. 1984. https://books.google.co.id/books?hl=id&lr=&id=0HfjjkTVNbcC.
W. Luce, "Topic of the Month—High-Silicon Cast Iron Tested For Use With Impressed Currents," Corrosion, vol. 10, pp. 267-268, 1954, https://doi.org/10.5006/0010-9312-10.9.267.
A. Rees, A. Gallagher, L. Wright, J. Wood, T. Cathery, B. Harrison, C. Down, and S. Comber, "Leisure craft sacrificial anodes as a source of zinc and cadmium to saline waters," Marine Pollution Bulletin, vol. 158, p. 111433, 2020, https://doi.org/10.1016/j.marpolbul.2020.111433.
I. Wahyono, M. Muslim, H. Suseno, C. Suryono, and A. Pujiyanto, "Bioaccumulation of zinc by Portunus pelagicus: Nuclear application techniques that use radiotracer 65Zn to study influence of concentration of Zn in seawater," Maritime Technology and Research, vol. 6, no. 1, pp. 266903-266903, 2024, https://doi.org/10.33175/mtr.2024.266903.
L. Leleyter, F. Baraud, T. Reinert, S. Gouali, M. Lemoine, and O. Gil, "Fate of aluminum released by sacrificial anodes – Contamination of marine sediments by environmentally available compounds," Comptes Rendus Geoscience, vol. 350, no. 5, pp. 195-201, 2018, https://doi.org/10.1016/j.crte.2018.05.003.
A. Mao, M. Mahaut, S. Pineau, D. Barillier, and C. Caplat, "Assessment of sacrificial anode impact by aluminum accumulation in mussel Mytilus edulis: A large-scale laboratory test," Marine Pollution Bulletin, vol. 62, no. 12, pp. 2707-2713, 2011, https://doi.org/10.1016/j.marpolbul.2011.09.017.
W. Lin, "Electronics and metal finishing and processing," Water Environment Research, vol. 73, 2018, https://doi.org/10.2175/106143001X143673.
G. Rodriguez-Garcia, J. Kellar, Z. Zhu, and I. Celik, "Toxicity assessment of lead and other metals used in perovskite solar panels," in 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC), pp. 1284-1287, 2022, https://doi.org/10.1109/PVSC48317.2022.9938657.
Z. Wu and D. Kong, "Comparative life cycle assessment of lithium-ion batteries with lithium metal, silicon nanowire, and graphite anodes," Clean Technologies and Environmental Policy, vol. 20, pp. 1233-1244, 2018, https://doi.org/10.1007/s10098-018-1548-9.
P. C. S. Hayfield, "Development of the noble metal/oxide coated titanium electrode. Part II: The move from platinum/iridium to ruthenium oxide electrocatalysts," Platinum Metals Review, vol. 42, pp. 46-55, 1998, https://doi.org/10.1595/003214098X4224655.
V. Panić and B. Nikolić, "Sol-gel prepared active ternary oxide coating on titanium in cathodic protection," Journal of the Serbian Chemical Society, vol. 72, no. 12, pp. 1393-1402, 2007, https://doi.org/10.2298/JSC0712393P.
T. Wang, L. Xu, and G. Chen, "Electrochemical properties of mixed metal oxide coated titanium anodes in seawater," Electrochemistry, vol. 8, pp. 172-176, 2002, https://doi.org/10.61558/2993-074X.1454.
M. Zahedi, K. Jafarzadeh, M. Mirjani, and H. M. Abbasi, “The effect of anodising time on the electrochemical behaviour of the Ti/TiO 2 NTs/IrO 2-RuO 2-Ta 2 O 5 anode,” Ionics, vol. 24, pp. 451-458, 2018, https://doi.org/10.1007/s11581-017-2210-y.
L. K. Xu and J. D. Scantlebury, “Microstructure and Electrochemical Properties of IrO2 Ta2 O 5-Coated Titanium Anodes,” Journal of the Electrochemical Society, vol. 150, no. 6, p. B254, 2003, https://doi.org/10.1149/1.1569479.
Yu, S., Wang, L., Wu, C., Feng, T., Cheng, Y., Bu, Z., & Zhu, S. (2020). Studies on the corrosion performance of an effective and novel sealing anodic oxide coating. Journal of Alloys and Compounds, 817, 153257, 2020, https://doi.org/10.1016/j.jallcom.2019.153257.
L. K. Xu and J. D. Scantlebury, "Microstructure and electrochemical properties of IrO2-Ta2O5-coated titanium anodes," Journal of the Electrochemical Society, vol. 150, no. 6, p. B254, 2003, https://doi.org/10.1149/1.1569479.
L. K. Xu and J. D. Scantlebury, "Electrochemical surface characterization of IrO2-Ta2O5-coated titanium electrodes in Na2SO4 solution," Journal of The Electrochemical Society, vol. 150, no. 6, p. B288, 2003, https://doi.org/10.1149/1.1574033.
C. Comninellis and G. P. Vercesi, "Characterization of DSA®-type oxygen-evolving electrodes: Choice of a coating," Journal of Applied Electrochemistry, vol. 21, pp. 335-345, 1991, https://doi.org/10.1007/BF01020219.
L. Xu, Y. Xin, and J. Wang, "A comparative study on IrO2–Ta2O5-coated titanium electrodes prepared with different methods," Electrochimica Acta, vol. 54, no. 6, pp. 1820-1825, 2009, https://doi.org/10.1016/j.electacta.2008.10.004.
G. P. Vercesi, J. Y. Salamin, and C. Comninellis, "Morphological and microstructural the Ti/IrO2-Ta2O5 electrode: Effect of the preparation temperature," Electrochimica Acta, vol. 36, no. 5-6, pp. 991-998, 1991, https://doi.org/10.1016/0013-4686(91)85306-R.
J. Krýsa, L. Kule, R. Mraz, and I. Roušar, "Effect of coating thickness and surface treatment of titanium on the properties of IrO2-Ta2O5 anodes," Journal of Applied Electrochemistry, vol. 26, pp. 999-1005, 1996, https://doi.org/10.1007/BF00242194.
Z. Yan, G. Li, J. Wang, Z. Zhang, Z. Feng, M. Tang, and R. Zhang, “Electro-catalytic study of IrO2Ta2O5 coated anodes with pretreated titanium substrates,” Journal of Alloys and Compounds, vol. 680, pp. 60-66, 2016, https://doi.org/10.1016/j.jallcom.2016.04.090.
Y. L. Xin, L. K. Xu, J. Wang, and X. Li, "Effect of sintering temperature on microstructure and electrocatalytic properties of Ti/IrO2-Ta2O5 anodes by pechini method," Rare Metal Materials and Engineering, vol. 39, no. 11, pp. 1903-1907, 2010, https://doi.org/10.1016/S1875-5372(10)60135-X.
Z. Yan and H. Meng, "Effect of different shapes of the titanium-based IrO2-Ta2O5 coatings anode on electrochemical properties," Rare Metal Materials and Engineering, vol. 41, no. 5, pp. 772-775, 2012, https://doi.org/10.1016/S1875-5372(12)60047-2.
P. C. S. Hayfield, "Development of the noble metal/oxide coated titanium electrode. Part III: Coated titanium anodes in widely ranging oxygen-evolving situations," Platinum Metals Review, vol. 42, no. 3, pp. 116-122, 1998, https://doi.org/10.1595/003214098X423116122.
W. Monzel, A. P. Druschitz, and M. Maxfield, "Development of new, low-voltage, aluminum, sacrificial anode chemistries," In NACE CORROSION, pp. NACE-2014, 2014, https://onepetro.org/NACECORR/proceedings-abstract/CORR14/All-CORR14/123113.
M. A. Li, H. J. Zeng, Y. G. Yan, and J. H. Qian, "Effects of Ga content on electrochemical properties of Al-Ga sacrificial anodes," Corrosion Science and Protection Technology, vol. 21, no. 2, pp. 125-127, 2009, https://www.cspt.org.cn/EN/Y2009/V21/I2/125.
M. A. Li, W. L. Li, H. J. Zeng, Y. G. Yan, and B. R. Hou, "Low driving voltage Al-Ga sacrificial anode and its activation mechanism," Journal of Chinese Society for Corrosion and Protection, vol. 30, no. 4, pp. 329-332, 2010, https://www.jcscp.org/EN/Y2010/V30/I4/329.
D. R. Sadoway, “Inert anodes for the Hall-Heroult cell: the ultimate materials challenge,” Jom, vol. 53, pp. 34-35, 2001, https://doi.org/10.1007/s11837-001-0206-5.
I. Shtepliuk, V. Khranovskyy, G. Lashkarev, V. Khomyak, A. Ievtushenko, V. Tkach, V. Lazorenko, I. Timofeeva, and R. Yakimova, "Microstructure and luminescence dynamics of ZnCdO films with high Cd content deposited on different substrates by DC magnetron sputtering method," Applied Surface Science, vol. 276, pp. 550-557, 2013, https://doi.org/10.1016/j.apsusc.2013.03.132.
G. Genchi, M. Sinicropi, G. Lauria, A. Carocci, and A. Catalano, "The effects of cadmium toxicity," International Journal of Environmental Research and Public Health, vol. 17, 2020, https://doi.org/10.3390/ijerph17113782.
X. Zhang, C. Du, Z. Liu, and K. Liu, “The influence of temperature and dissolved oxygen on the electrochemical properties of three Al-Zn-In series sacrificial anodes,” International Journal of Electrochemical Science, vol. 16, no. 4, p. 210430, 2021, https://doi.org/10.20964/2021.04.02.
J. Calderón, J. Barragán, J. Fierro, H. Mejía, C. González, V. Vázquez, K. Sánchez, M. Torres-Mancera, R. Retes-Mantilla, and R. Rodriguez-Diaz, "Corrosion Behavior of Al Modified with Zn in Chloride Solution," Materials, vol. 15, 2022, https://doi.org/10.3390/ma15124229.
G. Sperandio, C. Santos, and A. Galdino, "Influence of silicon on the corrosion behavior of Al–Zn–In sacrificial anode," Journal of Materials Research and Technology, vol. 15, pp. 614-622, 2021, https://doi.org/10.1016/j.jmrt.2021.08.033.
C. Rousseau, F. Baraud, L. Leleyter, and O. Gil, "Cathodic protection by zinc sacrificial anodes: Impact on marine sediment metallic contamination," Journal of Hazardous Materials, vol. 167, no. 1-3, pp. 953-958, 2009, https://doi.org/10.1016/j.jhazmat.2009.01.083.
A. Jelmert and J. H. van Leeuwen, "Harming local species or preventing the transfer of exotics? Possible negative and positive effects of using zinc anodes for corrosion protection of ballast water tanks," Water Research, vol. 34, no. 6, pp. 1937-1940, 2000, https://doi.org/10.1016/S0043-1354(99)00416-9.
J. Li, Z. Chen, J. Jing, and J. Hou, "Electrochemical behavior of Mg-Al-Zn-Ga-In alloy as the anode for seawater-activated battery," Journal of Materials Science & Technology, vol. 41, pp. 33-42, 2020, https://doi.org/10.1016/j.jmst.2019.08.052.
Y. B. Huang, G. W. Song, H. D. Ding, X. B. Liu, and X. H. Shao, "Cathodic Protection Performance of Al-Zn-In-Mg-Ga-Mn Sacrificial Anode," Advanced Materials Research, vol. 214, pp. 296-300, 2011, https://doi.org/10.4028/www.scientific.net/AMR.214.296.
H. S. Aljibori, A. Alamiery, and A. A. H. Kadhum, "Advances in corrosion protection coatings: A comprehensive review," International Journal of Corrosion and Scale Inhibition, vol. 12, no. 4, pp. 1476-1520, 2023, https://doi.org/10.17675/2305-6894-2023-12-4-6.
P. C. S. Hayfield, "Platinised Titanium Electrodes for Cathodic Protection: Extensive use has Provided New Insights into the Electrochemical Properties of Platinum," Platinum Metals Review, vol. 27, no. 1, pp. 2-8, 1983, https://doi.org/10.1595/003214083X27128.
P. C. S. Hayfield, "Development of the noble metal/oxide coated titanium electrode," Platinum Metals Review, vol. 42, no. 2, pp. 46-55, 1998, https://doi.org/10.1595/003214098X4224655.
U. Eduok, J. Szpunar, and E. Ebenso, "Synthesis and characterization of anticorrosion zirconia/acrylic nanocomposite resin coatings for steel," Progress in Organic Coatings, vol. 137, p. 105337, 2019, https://doi.org/10.1016/j.porgcoat.2019.105337.
M. R. Derakhshandeh, M. J. Eshraghi, and M. Razavi, "Recent developments in the new generation of hard coatings applied on cemented carbide cutting tools," International Journal of Refractory Metals and Hard Materials, vol. 111, p. 106077, 2023, https://doi.org/10.1016/j.ijrmhm.2022.106077.
Y. X. Wang and S. Zhang, "Toward hard yet tough ceramic coatings," Surface and Coatings Technology, vol. 258, pp. 1-16, 2014, https://doi.org/10.1016/j.surfcoat.2014.07.007.
A. Raza, S. Abdulahad, B. Kang, H. J. Ryu, and S. H. Hong, "Corrosion resistance of weight reduced AlxCrFeMoV high entropy alloys," Applied Surface Science, vol. 485, pp. 368-374, 2019, https://doi.org/10.1016/j.apsusc.2019.03.173.
Y. Fu, J. Li, H. Luo, C. Du, and X. Li, "Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys," Journal of Materials Science & Technology, vol. 80, pp. 217-233, 2021, https://doi.org/10.1016/j.jmst.2020.11.044.
A. R. Khan, H.-J. Zhang, Z. Jun, S. M. Eldin, N. S. Alsaiari, and K. M. Katubi, "Electrochemical corrosion resistance of aluminum alloy 6101 with cerium-based coatings in an alkaline environment," Frontiers in Chemistry, vol. 10, p. 1066958, 2022, https://doi.org/10.3389/fchem.2022.1066958.
S. M. Gad, S. Emad, X. Zhou, S. B. Lyon, Z. Jin, and I. M. Dagwa, "Effectiveness of strontium zinc phosphosilicate on the corrosion protection of AA2198-T851 aluminum alloy in sodium chloride solution," Corrosion Science, vol. 209, p. 110725, 2022, https://doi.org/10.1016/j.corsci.2022.110725.
M. Ramezani, Z. M. Ripin, T. Pasang, and C.-P. Jiang, "Surface Engineering of Metals: Techniques, Characterizations and Applications," Metals, vol. 13, no. 7, p. 1299, 2023, https://doi.org/10.3390/met13071299.
M. Liang, Y. Yuan, X. Li, J. Cheng, X. Zhang, K. Zhang, and R. You, "Enhanced corrosion resistance of Mg and Mg alloys with fs-laser printed hydrophobic and periodically microrippled surface for armor application," Applied Surface Science, vol. 639, p. 158156, 2023, https://doi.org/10.1016/j.apsusc.2023.158156.
W. Yan, Y. Zhao, Y. Zhang, Q. Li, S. Chen, H. Yuan, Z. Zhang, L. Chen, J. Luo, P. Pang, G. He, M. Ying, and B. Liao, "Corrosion-resistant and interfacial conductive AlTiVCrMo high-entropy alloy and (AlTiVCrMo)Nx high-entropy ceramics coatings for surface modification of bipolar plates in proton exchange membrane fuel cells," Journal of Power Sources, vol. 527, p. 231217, 2022, https://doi.org/10.1016/j.jpowsour.2022.231217.
W. Wu, Z. Huang, and T. Lim, "Recent development of mixed metal oxide anodes for electrochemical oxidation of organic pollutants in water," Applied Catalysis A: General, vol. 480, pp. 58-78, 2014, https://doi.org/10.1016/j.apcata.2014.04.035.
L. Shao, P. He, J. Xue, and G. Li, "Electrolytic degradation of biorefractory organics and ammonia in leachate from bioreactor landfill," Water Science and Technology, vol. 53, no. 11, pp. 143-150, 2006, https://doi.org/10.2166/wst.2006.347.
C. Tan, B. Xiang, Y. Li, J. Fang, and M. Huang, "Preparation and characteristics of a nano-PbO2 anode for organic wastewater treatment," Chemical Engineering Journal, vol. 166, no. 1, pp. 15-21, 2011, https://doi.org/10.1016/j.cej.2010.08.018.
K. Pan, M. Tian, Z. H. Jiang, B. Kjartanson, and A. Chen, "Electrochemical oxidation of lignin at lead dioxide nanoparticles photoelectrodeposited on TiO2 nanotube arrays," Electrochimica Acta, vol. 60, pp. 147, 2012, https://doi.org/10.1016/j.electacta.2011.11.025.
S. Li, F. Wang, M. Xu, Y. Wang, W. Fang, and Y. Hu, "Fabrication and characteristics of a nanostructure PbO2 anode and its application for degradation of phenol," Journal of The Electrochemical Society, vol. 160, no. 4, p. E44, 2013, https://doi.org/10.1149/2.082304jes.
X. Meng, J. Yao, F. Liu, H. He, M. Zhou, P. Xiao, and Y. Zhang, "Preparation of SnO2@ C-doping TiO2 nanotube arrays and its electrochemical and photoelectrochemical properties," Journal of Alloys and Compounds, vol. 552, pp. 392-397, 2013, https://doi.org/10.1016/j.jallcom.2012.10.177.
Y. Chen, L. Hong, H. Xue, W. Han, L. Wang, X. Sun, and J. Li, "Preparation and characterization of TiO2-NTs/SnO2-Sb electrodes by electrodeposition," Journal of Electroanalytical Chemistry, vol. 648, no. 2, pp. 119-127, 2010, https://doi.org/10.1016/j.jelechem.2010.08.004.
Zhao, G., Cui, X., Liu, M., Li, P., Zhang, Y., Cao, T., and Li, D., "Electrochemical degradation of refractory pollutant using a novel microstructured TiO2 nanotubes/Sb-doped SnO2 electrode," Environmental Science & Technology, vol. 43, no. 5, pp. 1480-1486, 2009, https://doi.org/10.1021/es802155p.
Pan, J. H., Chai, S. Y., Lee, C., Park, S. E., and Lee, W. I., "Controlled formation of highly crystallized cubic and hexagonal mesoporous SnO2 thin films," The Journal of Physical Chemistry C, vol. 111, no. 15, pp. 5582-5587, 2007, https://doi.org/10.1021/jp065529i.
C. Weidmann, K. Brezesinski, C. Suchomski, K. Tropp, N. Grosser, J. Haetge, and T. Brezesinski, "Morphology-controlled synthesis of nanocrystalline η-Al2O3 thin films, powders, microbeads, and nanofibers with tunable pore sizes from preformed oligomeric oxo-hydroxo building blocks," Chemistry of Materials, vol. 24, no. 3, pp. 486-494, 2012, https://doi.org/10.1021/jp065529i.
S. Chai, et al., "Novel sieve-like SnO2/TiO2 nanotubes with integrated photoelectrocatalysis: fabrication and application for efficient toxicity elimination of nitrophenol wastewater," The Journal of Physical Chemistry C, vol. 115, no. 37, pp. 18261-18269, 2011, https://doi.org/10.1021/jp205228h.
Y. Wang et al., "Design of a novel Cu2O/TiO2/carbon aerogel electrode and its efficient electrosorption-assisted visible light photocatalytic degradation of 2, 4, 6-trichlorophenol," ACS Applied Materials & Interfaces, vol. 4, no. 8, pp. 3965-3972, 2012, https://doi.org/10.1021/am300795w.
M. Wu, Y. Jin, G. Zhao, M. Li, and D. Li, "Electrosorption-promoted photodegradation of opaque wastewater on a novel TiO2/carbon aerogel electrode," Environmental Science & Technology, vol. 44, no. 5, pp. 1780-1785, 2010, https://doi.org/10.1021/es903201m.
L. Frolova, N. Lyskov, and Y. Dobrovolsky, "Nanostructured Pt/SnO2–SbOx–RuO2 electrocatalysts for direct alcohol fuel cells," Solid State Ionics, vol. 225, pp. 92-98, 2012, https://doi.org/10.1016/j.ssi.2012.02.013.
Y. Lee et al., "Highly single crystalline Ir x Ru1–x O2 mixed metal oxide nanowires," The Journal of Physical Chemistry C, vol. 116, no. 30, pp. 16300-16304, 2012, https://doi.org/10.1021/jp3048532.
Y. Lee, H. Y. Shin, S. H. Chun, J. Lee, W. J. Park, J. M. Baik, et al., "Highly Single Crystalline Ir x Ru1–x O2 Mixed Metal Oxide Nanowires," J. Phys. Chem. C, vol. 116, no. 30, pp. 16300–16304, 2012, https://doi.org/10.1021/jp3048532.
X. Cui, G. Zhu, Y. Pan, Q. Shao, M. Dong, Y. Zhang, and Z. Guo, "Polydimethylsiloxane-titania nanocomposite coating: fabrication and corrosion resistance," Polymer, vol. 138, pp. 203–210, 2018, https://doi.org/10.1016/j.polymer.2018.01.063.
S. V. Harb, M. C. Uvida, A. Trentin, A. O. Lobo, T. J. Webster, S. H. Pulcinelli, et al., "PMMA-silica nanocomposite coating: Effective corrosion protection and biocompatibility for a Ti6Al4V alloy," Mater. Sci. Eng. C, vol. 110, p. 110713, 2020, https://doi.org/10.1016/j.msec.2020.110713.
S. John, A. Salam, A. M. Baby, and A. Joseph, "Corrosion inhibition of mild steel using chitosan/TiO2 nanocomposite coatings," Prog. Org. Coat., vol. 129, pp. 254–259, 2019, https://doi.org/10.1016/j.porgcoat.2019.01.025.
A. Chandra, L. S. Turng, P. Gopalan, R. M. Rowell, and S. Gong, "Study of utilizing thin polymer surface coating on the nanoparticles for melt compounding of polycarbonate/alumina nanocomposites and their optical properties," Compos. Sci. Technol., vol. 68, no. 3-4, pp. 768–776, 2008, https://doi.org/10.1016/j.compscitech.2007.08.027.
J. Loste, J. M. Lopez-Cuesta, L. Billon, H. Garay, and M. Save, "Transparent polymer nanocomposites: An overview on their synthesis and advanced properties," Prog. Polym. Sci., vol. 89, pp. 133–158, 2019, https://doi.org/10.1016/j.progpolymsci.2018.10.003.
X. Shi, T. A. Nguyen, Z. Suo, Y. Liu, and R. Avci, "Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating," Surf. Coat. Technol., vol. 204, no. 3, pp. 237–245, 2009, https://doi.org/10.1016/j.surfcoat.2009.06.048.
T. C. Huang, Y. A. Su, T. C. Yeh, H. Y. Huang, C. P. Wu, K. Y. Huang, et al., "Advanced anticorrosive coatings prepared from electroactive epoxy–SiO2 hybrid nanocomposite materials," Electrochim. Acta, vol. 56, no. 17, pp. 6142–6149, 2011, https://doi.org/10.1016/j.electacta.2011.04.053.
S. Palraj, M. Selvaraj, K. Maruthan, and G. Rajagopal, "Corrosion and wear resistance behavior of nano-silica epoxy composite coatings," Prog. Org. Coat., vol. 81, pp. 132–139, 2015, https://doi.org/10.1016/j.porgcoat.2015.01.005.
A. Ghanbari and M. M. Attar, "A study on the anticorrosion performance of epoxy nanocomposite coatings containing epoxy-silane treated nano-silica on mild steel substrate," J. Ind. Eng. Chem., vol. 23, pp. 145–153, 2015, https://doi.org/10.1016/j.jiec.2014.08.008.
S. Ammar, K. Ramesh, B. Vengadaesvaran, S. Ramesh, and A. K. Arof, "A novel coating material that uses nano-sized SiO2 particles to intensify hydrophobicity and corrosion protection properties," Electrochim. Acta, vol. 220, pp. 417–426, 2016, https://doi.org/10.1016/j.electacta.2016.10.099.
E. Barna, B. Bommer, J. Kürsteiner, A. Vital, O. V. Trzebiatowski, W. Koch, et al., "Innovative, scratch proof nanocomposites for clear coatings," Compos. Part A Appl. Sci. Manuf., vol. 36, no. 4, pp. 473–480, 2005, https://doi.org/10.1016/j.compositesa.2004.10.014.
M. Yeganeh and A. Keyvani, "The effect of mesoporous silica nanocontainers incorporation on the corrosion behavior of scratched polymer coatings," Prog. Org. Coat., vol. 90, pp. 296–303, 2016, https://doi.org/10.1016/j.porgcoat.2015.11.006.
M. Yeganeh and M. Saremi, "Corrosion inhibition of magnesium using biocompatible Alkyd coatings incorporated by mesoporous silica nanocontainers," Prog. Org. Coat., vol. 79, pp. 25–30, 2015, https://doi.org/10.1016/j.porgcoat.2014.10.015.
J. F. Pagotto, F. J. Recio, A. D. J. Motheo, and P. Herrasti, "Multilayers of PAni/n-TiO2 and PAni on carbon steel and welded carbon steel for corrosion protection," Surf. Coat. Technol., vol. 289, pp. 23–28, 2016, https://doi.org/10.1016/j.surfcoat.2016.01.046.
N. Wang, W. Fu, J. Zhang, X. Li, and Q. Fang, "Corrosion performance of waterborne epoxy coatings containing polyethylenimine treated mesoporous-TiO2 nanoparticles on mild steel," Prog. Org. Coat., vol. 89, pp. 114–122, 2015, https://doi.org/10.1016/j.porgcoat.2015.07.009.
S. Radhakrishnan, C. R. Siju, D. Mahanta, S. Patil, and G. Madras, "Conducting polyaniline–nano-TiO2 composites for smart corrosion resistant coatings," Electrochim. Acta, vol. 54, no. 4, pp. 1249–1254, 2009, https://doi.org/10.1016/j.electacta.2008.08.069.
A. Mostafaei and F. Nasirpouri, "Epoxy/polyaniline–ZnO nanorods hybrid nanocomposite coatings: Synthesis, characterization and corrosion protection performance of conducting paints," Prog. Org. Coat., vol. 77, no. 1, pp. 146–159, 2014, https://doi.org/10.1016/j.porgcoat.2013.08.015.
A. Olad and R. Nosrati, "Preparation and corrosion resistance of nanostructured PVC/ZnO–polyaniline hybrid coating," Prog. Org. Coat., vol. 76, no. 1, pp. 113–118, 2013, https://doi.org/10.1016/j.porgcoat.2013.08.015.
N. Elangovan, A. Srinivasan, S. Pugalmani, N. Rajendiran, and N. Rajendran, "Development of poly (vinylcarbazole)/alumina nanocomposite coatings for corrosion protection of 316L stainless steel in 3.5% NaCl medium," J. Appl. Polym. Sci., vol. 134, no. 27, p. 44937, 2017, https://doi.org/10.1002/app.44937.
S. Khasim, S. C. Raghavendra, M. Revanasiddappa, K. C. Sajjan, M. Lakshmi, and M. Faisal, "Synthesis, characterization and magnetic properties of polyaniline/γ-Fe 2 O 3 composites," Bull. Mater. Sci., vol. 34, pp. 1557–1561, 2011, https://doi.org/10.1007/s12034-011-0358-z.
L. S. Živković, J. P. Popić, B. V. Jegdić, Z. Dohčević-Mitrović, J. B. Bajat, and V. B. Mišković-Stanković, "Corrosion study of ceria coatings on AA6060 aluminum alloy obtained by cathodic electrodeposition: effect of deposition potential," Surf. Coat. Technol., vol. 240, pp. 327–335, 2014, https://doi.org/10.1016/j.surfcoat.2013.12.048.
M. A. Arenas, A. Conde, and J. J. De Damborenea, "Cerium: a suitable green corrosion inhibitor for tinplate," Corros. Sci., vol. 44, no. 3, pp. 511–520, 2002, https://doi.org/10.1016/S0010-938X(01)00053-1.
S. A. Umoren and A. Madhankumar, "Effect of addition of CeO2 nanoparticles to pectin as inhibitor of X60 steel corrosion in strong acid media: synergistic and mechanistic implications," J. Adhes. Sci. Technol., vol. 30, no. 13, pp. 1424–1443, 2016, https://doi.org/10.1016/j.molliq.2016.09.082.
M. F. Smiechowski and V. F. Lvovich, "Characterization of non-aqueous dispersions of carbon black nanoparticles by electrochemical impedance spectroscopy," J. Electroanal. Chem., vol. 577, no. 1, pp. 67–78, 2005, https://doi.org/10.1016/j.jelechem.2004.11.015.
M. F. Smiechowski and V. F. Lvovich, "Characterization of non-aqueous dispersions of carbon black nanoparticles by electrochemical impedance spectroscopy," Journal of Electroanalytical Chemistry, vol. 577, no. 1, pp. 67-78, 2005, https://doi.org/10.1016/j.jelechem.2004.11.028.
A. Ghasemi-Kahrizsangi, H. Shariatpanahi, J. Neshati, and E. Akbarinezhad, "Corrosion behavior of modified nano carbon black/epoxy coating in accelerated conditions," Applied Surface Science, vol. 331, pp. 115-126, 2015, https://doi.org/10.1016/j.apsusc.2015.01.008.
A. Foyet, T. H. Wu, A. Kodentsov, L. G. J. van der Ven, and R. A. T. M. van Benthem, "Corrosion protection and delamination mechanism of epoxy/carbon black nanocomposite coating on AA2024-T3," Journal of The Electrochemical Society, vol. 160, no. 4, pp. C159-C167, 2013, https://doi.org/10.1149/2.063304jes.
H. Wang et al., "Anisotropy in tribological performances of long aligned carbon nanotubes/polymer composites," Carbon, vol. 67, pp. 38-47, 2014, https://doi.org/10.1016/j.carbon.2013.09.032.
B. Prasanna, D. Avadhani, M. Raghu, and Y. Kumar, "Studies on ZnS nanoparticles reinforced epoxy nanocomposites for corrosion resistance applications," Materials Today Communications, vol. 12, pp. 72-78, 2017, https://doi.org/10.1016/j.mtcomm.2017.03.004.
V. D. Punetha et al., "Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison between CNT and graphene," Progress in Polymer Science, vol. 67, pp. 1-47, 2017, https://doi.org/10.1016/j.progpolymsci.2016.12.009.
S. Pourhashem, M. R. Vaezi, A. Rashidi, and M. R. Bagherzadeh, "Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel," Corrosion Science, vol. 115, pp. 78-92, 2017, https://doi.org/10.1016/j.corsci.2016.11.013.
Y. Cui, S. I. Kundalwal, and S. Kumar, "Gas barrier performance of graphene/polymer nanocomposites," Carbon, vol. 98, pp. 313-333, 2016, https://doi.org/10.1016/j.carbon.2015.11.018.
C. H. Chang et al., "Novel anticorrosion coatings prepared from polyaniline/graphene composites," Carbon, vol. 50, no. 14, pp. 5044-5051, 2012, https://doi.org/10.1016/j.carbon.2012.06.048.
Q. Zhu et al., "Epoxy coating with in-situ synthesis of polypyrrole functionalized graphene oxide for enhanced anticorrosive performance," Progress in Organic Coatings, vol. 140, p. 105488, 2020, https://doi.org/10.1016/j.porgcoat.2019.105488.
J. González-Guzmán, J. J. Santana, S. González, and R. M. Souto, "Resistance of metallic substrates protected by an organic coating containing glass flakes," Progress in Organic Coatings, vol. 68, no. 3, pp. 240-243, 2010, https://doi.org/10.1016/j.porgcoat.2010.01.007.
S. Zuo et al., "Polyaniline/g-C3N4 composites as novel media for anticorrosion coatings," Journal of Coatings Technology and Research, vol. 14, pp. 1307-1314, 2017, https://doi.org/10.1007/s11998-017-9916-7.
E. Husain et al., "Marine corrosion protective coatings of hexagonal boron nitride thin films on stainless steel," ACS Applied Materials & Interfaces, vol. 5, no. 10, pp. 4129-4135, 2013, https://doi.org/10.1021/am400016y.
M. D. Sanchez-Garcia and J. M. Lagaron, "On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid," Cellulose, vol. 17, pp. 987-1004, 2010, https://doi.org/10.1007/s10570-010-9430-x.
A. M. Kumar et al., "Electrochemical and in vitro bioactivity of polypyrrole/ceramic nanocomposite coatings on 316L SS bio-implants," Materials Science and Engineering: C, vol. 43, pp. 76-85, 2014, https://doi.org/10.1016/j.msec.2014.06.023.
M. A. Deyab, N. Hamdi, M. Lachkar, and B. El Bali, "Clay/Phosphate/Epoxy nanocomposites for enhanced coating activity towards corrosion resistance," Progress in Organic Coatings, vol. 123, pp. 232-237, 2018, https://doi.org/10.1016/j.porgcoat.2018.07.003.
D. LeCorre et al., "All starch nanocomposite coating for barrier material," Journal of Applied Polymer Science, vol. 131, no. 3, 2014, https://doi.org/10.1002/app.39750.
M. L. Zheludkevich et al., "Self-healing protective coatings with 'green' chitosan based pre-layer reservoir of corrosion inhibitor," Journal of Materials Chemistry, vol. 21, no. 13, pp. 4805-4812, 2011, https://doi.org/10.1039/c1jm10304k.
U. Eduok and J. Szpunar, "Ultrasound-assisted synthesis of zinc molybdate nanocrystals and molybdate-doped epoxy/PDMS nanocomposite coatings for Mg alloy protection," Ultrasonics Sonochemistry, vol. 44, pp. 288-298, 2018, https://doi.org/10.1016/j.ultsonch.2018.02.019.
M. H. Moradi, M. Aliofkhazraei, M. Toorani, A. Golgoon, and A. S. Rouhaghdam, "SiAlON–epoxy nanocomposite coatings: Corrosion and wear behavior," Journal of Applied Polymer Science, vol. 133, no. 35, 2016, https://doi.org/10.1002/app.43995.
H. R. Bakhsheshi-Rad, E. Hamzah, M. Kasiri-Asgarani, S. Jabbarzare, N. Iqbal, and M. A. Kadir, "Deposition of nanostructured fluorine-doped hydroxyapatite–polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications," Mater. Sci. Eng. C, vol. 60, pp. 526–537, 2016, https://doi.org/10.1016/j.msec.2015.11.057.
B. A. Bhanvase and S. H. Sonawane, "New approach for simultaneous enhancement of anticorrosive and mechanical properties of coatings: Application of water repellent nano CaCO3–PANI emulsion nanocomposite in alkyd resin," Chem. Eng. J., vol. 156, no. 1, pp. 177–183, 2010.
S. M. Mousavifard, P. M. Nouri, M. M. Attar, and B. Ramezanzadeh, "The effects of zinc aluminum phosphate (ZPA) and zinc aluminum polyphosphate (ZAPP) mixtures on corrosion inhibition performance of epoxy/polyamide coating," J. Ind. Eng. Chem., vol. 19, no. 3, pp. 1031–1039, 2013.
W. G. Ji, J. M. Hu, L. Liu, J. Q. Zhang, and C. N. Cao, "Improving the corrosion performance of epoxy coatings by chemical modification with silane monomers," Surf. Coat. Technol., vol. 201, no. 8, pp. 4789–4795, 2007.
M. A. Deyab, A. De Riccardis, and G. Mele, "Novel epoxy/metal phthalocyanines nanocomposite coatings for corrosion protection of carbon steel," J. Mol. Liq., vol. 220, pp. 513–517, 2016.
S. Y. Arman, B. Ramezanzadeh, S. Farghadani, M. Mehdipour, and A. Rajabi, "Application of the electrochemical noise to investigate the corrosion resistance of an epoxy zinc-rich coating loaded with lamellar aluminum and micaceous iron oxide particles," Corros. Sci., vol. 77, pp. 118–127, 2013.
M. K. Madhup, N. K. Shah, and P. M. Wadhwani, "Investigation of surface morphology, anti-corrosive and abrasion resistance properties of nickel oxide epoxy nanocomposite (NiO-ENC) coating on mild steel substrate," Prog. Org. Coat., vol. 80, pp. 1–10, 2015.
H. Choi, Y. K. Song, K. Y. Kim, and J. M. Park, "Encapsulation of triethanolamine as organic corrosion inhibitor into nanoparticles and its active corrosion protection for steel sheets," Surf. Coat. Technol., vol. 206, no. 8–9, pp. 2354–2362, 2012.
B. Ramezanzadeh, G. Bahlakeh, and M. Ramezanzadeh, "Polyaniline-cerium oxide (PAni-CeO2) coated graphene oxide for enhancement of epoxy coating corrosion protection performance on mild steel," Corros. Sci., vol. 137, pp. 111–126, 2018.
Z. Yu, H. Di, Y. Ma, L. Lv, Y. Pan, C. Zhang, and Y. He, "Fabrication of graphene oxide–alumina hybrids to reinforce the anti-corrosion performance of composite epoxy coatings," Appl. Surf. Sci., vol. 351, pp. 986–996, 2015.
Y. Zhan, J. Zhang, X. Wan, Z. Long, S. He, and Y. He, "Epoxy composites coating with Fe3O4 decorated graphene oxide: Modified bio-inspired surface chemistry, synergistic effect and improved anti-corrosion performance," Appl. Surf. Sci., vol. 436, pp. 756–767, 2018.
M. G. Sari, M. Shamshiri, and B. Ramezanzadeh, "Fabricating an epoxy composite coating with enhanced corrosion resistance through impregnation of functionalized graphene oxide-co-montmorillonite Nanoplatelet," Corros. Sci., vol. 129, pp. 38–53, 2017.
M. Rui, Y. Jiang, and A. Zhu, "Sub-micron calcium carbonate as a template for the preparation of dendrite-like PANI/CNT nanocomposites and its corrosion protection properties," Chem. Eng. J., vol. 385, p. 123396, 2020.
D. E. Tallman, G. Spinks, A. Dominis, and G. G. Wallace, "Electroactive conducting polymers for corrosion control," J. Solid State Electrochem., vol. 6, pp. 73–84, 2002.
E. Armelin, Á. Meneguzzi, C. A. Ferreira, and C. Alemán, "Conducting polymers in organic coatings," Surf. Coat. Technol., vol. 203, pp. 3763–3769, 2009.
P. Chandrasekhar. Conducting Polymers, Fundamentals and Applications: A Practical Approach. New York, NY: Springer. 1999.
G. Inzelt. Conducting Polymers: A New Era in Electrochemistry. New York, NY: Springer. 2012.
K. Saravanan, S. Sathiyanarayanan, S. Muralidharan, S. S. Azim, and G. Venkatachari, "Performance evaluation of polyaniline pigmented epoxy coating for corrosion protection of steel in concrete environment," Prog. Org. Coat., vol. 59, no. 2, pp. 160–167, 2007.
M. A. S. Oliveira, J. J. Moraes, and R. Faez, "Impedance studies of poly(methylmethacrylate-co-acrylic acid) doped polyaniline films on aluminum alloy," Prog. Org. Coat., vol. 65, no. 3, pp. 348–356, 2009.
A. J. Dominis, G. M. Spinks, and G. G. Wallace, "Comparison of polyaniline primers prepared with different dopants for corrosion protection of steel," Prog. Org. Coat., vol. 48, no. 1, pp. 43–49, 2003.
K. Kamaraj, S. Sathiyanarayanan, S. Muthukrishnan, and G. Venkatachari, "Corrosion Protection of Iron by Benzoate Doped Polyaniline Containing Coatings," Progress in Organic Coatings, vol. 64, no. 4, pp. 460-465, 2009.
S. Shimizu, T. Saitoh, M. Uzawa, M. Yuasa, K. Yano, T. Maruyama, and K. Watanabe, "Synthesis and Applications of Sulfonated Polyaniline," Synthetic Metals, vol. 85, no. 1-3, pp. 1337-1338, 1997.
Y. Sahin, K. Pekmez, and A. Yildiz, "Electrochemical Preparation of Soluble Sulfonated Polymers and Aniline Copolymers of Aniline Sulfonic Acids in Dimethylsulfoxide," Journal of Applied Polymer Science, vol. 90, no. 8, pp. 2163-2169, 2003.
C.-W. Peng et al., "Nanocasting Technique to Prepare Polyaniline Surface with Biomimetic Superhydrophobic Structures for Anticorrosion Application," Electrochimica Acta, vol. 95, pp. 192-199, 2013.
E. Armelin et al., "Corrosion Protection with Polyaniline and Polypyrrole as Anticorrosive Additives for Epoxy Paint," Corrosion Science, vol. 50, no. 3, pp. 721-728, 2008.
D. Kowalski, M. Ueda, and T. Ohtsuka, "Corrosion Protection of Steel by Bi-layered Polypyrrole Doped with Molybdophosphate and Naphthalenedisulfonate Anions," Corrosion Science, vol. 49, no. 3, pp. 1635-1644, 2007.
G. Bereket and E. Hür, "The Corrosion Protection of Mild Steel by Single Layered Polypyrrole and Multilayered Polypyrrole/Poly(5-amino-1-naphthol) Coatings," Progress in Organic Coatings, vol. 65, no. 1, pp. 116-124, 2009.
P. Herrasti, A. I. del Rio, and J. Recio, "Electrodeposition of Homogeneous and Adherent Polypyrrole on Copper for Corrosion Protection," Electrochimica Acta, vol. 52, no. 23, pp. 6496-6501, 2007.
Y. F. Jiang, X. W. Guo, Y. H. Wei, C. Q. Zhai, and W. J. Ding, "Corrosion Protection of Polypyrrole Electrodeposited on AZ91 Magnesium Alloys in Alkaline Solutions," Synthetic Metals, vol. 139, no. 2, pp. 335-339, 2003.
N. Attarzadeh, K. Raeissi, and M. A. Golozar, "Effect of Saccharin Addition on the Corrosion Resistance of Polypyrrole Coatings," Progress in Organic Coatings, vol. 63, no. 2, pp. 167-174, 2008.
M. G. Hosseini, M. Raghibi-Boroujeni, I. Ahadzadeh, R. Najjar, and M. S. Seyed Dorraji, "Effect of Polypyrrole-Montmorillonite Nanocomposites Powder Addition on Corrosion Performance of Epoxy Coatings on Al 5000," Progress in Organic Coatings, vol. 66, no. 3, pp. 321-327, 2009.
D. E. Tallman et al., "Nanocomposite of Polypyrrole and Alumina Nanoparticles as a Coating Filler for the Corrosion Protection of Aluminum Alloy 2024-T3," Applied Surface Science, vol. 254, no. 17, pp. 5452-5459, 2008.
G. Kousik, S. Pitchumani, and N. G. Renganathan, "Electrochemical Characterization of Polythiophene-Coated Steel," Progress in Organic Coatings, vol. 43, no. 4, pp. 286-291, 2001.
C. Ocampo et al., "Application of a Polythiophene Derivative as Anticorrosive Additive for Paints," Progress in Organic Coatings, vol. 53, no. 3, pp. 217-224, 2005.
U. Rammelt, P. T. Nguyen, and W. Plieth, "Protection of Mild Steel by Modification with Thin Films of Polymethylthiophene," Electrochimica Acta, vol. 46, no. 26-27, pp. 4251-4257, 2001.
M. Rohwerder and A. Michalik, "Conducting Polymers for Corrosion Protection: What Makes the Difference Between Failure and Success?" Electrochimica Acta, vol. 53, no. 3, pp. 1300-1313, 2007.
B. N. Grgur, M. M. Gvozdenović, V. B. Mišković-Stanković, and Z. Kačarević-Popović, "Corrosion Behavior and Thermal Stability of Electrodeposited PANI/epoxy Coating System on Mild Steel in Sodium Chloride Solution," Progress in Organic Coatings, vol. 56, no. 2-3, pp. 214-219, 2006.
G. Williams, R. J. Holness, D. A. Worsley, and H. N. McMurray, "Inhibition of Corrosion-Driven Organic Coating Delamination on Zinc by Polyaniline," Electrochemistry Communications, vol. 6, no. 6, pp. 549-555, 2004.
E. Armelin et al., "Corrosion Protection with Polyaniline and Polypyrrole as Anticorrosive Additives for Epoxy Paint," Corrosion Science, vol. 50, no. 3, pp. 721-728, 2008.
P. Hayfield and A. Hill, "Anwendung der Diskreten Ebonex Anoden für den Kathodischen Schutz der Bewehrung an Beton: Das Verhalten des Ebofix Mörtels / Ebonex® Discrete Anodes in the Cathodic Protection of Rebar in Concrete: Performance of Ebofix Grouts," Restoration of Buildings and Monuments, vol. 6, pp. 647-654, 2000.
D. Ainakulova et al., "Analytical Review of Conductive Coatings, Cathodic Protection, and Concrete," Kompleksnoe Ispolʹzovanie Mineralʹnogo syrʹâ / Complex Use of Mineral Resources / Mineraldik Shikisattardy Keshendi Paidalanu, vol. 329, no. 2, pp. 92-102, 2023.
T. Pietrzak, M. Wasiucionek, and J. Garbarczyk, "Towards Higher Electric Conductivity and Wider Phase Stability Range via Nanostructured Glass-Ceramics Processing," Nanomaterials, vol. 11, 2021.
H. Abbasi, K. Jafarzadeh, and S. Mirali, "An investigation of the effect of RuO2 on the deactivation and corrosion mechanism of a Ti/IrO2 + Ta2O5 coating in an OER application," J. Electroanal. Chem., vol. 777, pp. 67-74, 2016.
F. Wu, J. Bai, J. Feng, and S. Xiong, "Porous mixed metal oxides: design, formation mechanism, and application in lithium-ion batteries," Nanoscale, vol. 7, no. 41, pp. 17211-30, 2015.
G. Chang et al., "Dynamic Reconstructed RuO2/NiFeOOH with Coherent Interface for Efficient Seawater Oxidation," Small, vol. 19, no. 12, p. e2206768, 2023.
W. Jurczak, "Passive Corrosion Protection of Al-Zn-Mg alloy in Seawater," Naše More, vol. 66, no. 3, pp. 157-161, 2019.
K. Du et al., "Durability of platinum coating anode in molten carbonate electrolysis cell," Corros. Sci., vol. 154, pp. 125-135, 2019.
A. Korczyński, A. Doniec, and J. Świderski, "Studies on the durability of platinum and ruthenium oxide coated titanium anodes in the d-ribono-γ-lactone electro-reduction process," Corros. Sci., vol. 21, no. 5, pp. 329-332, 1981.
S. Yu, S. Lee, D. Lee, Y. Sung, and T. Hyeon, "Conversion Reaction-Based Oxide Nanomaterials for Lithium Ion Battery Anodes," Small, vol. 12, no. 16, pp. 2146-2172, 2016.
C. Casas and W. Li, "A review of application of carbon nanotubes for lithium ion battery anode material," J. Power Sources, vol. 208, pp. 74-85, 2012.
C. Tan and D. Blackwood, "Corrosion protection by multilayered conducting polymer coatings," Corros. Sci., vol. 45, no. 3, pp. 545-557, 2003.
F. Gao, J. Mu, Z. Bi, S. Wang, and Z. Li, "Recent advances of polyaniline composites in anticorrosive coatings: A review," Prog. Org. Coat., vol. 151, p. 106071, 2021.
J. Zuo, W. Yao, J. Xu, Y. Chen, and X. Liu, “Effects of Carbon Nanotube-Carbon Fiber Cementitious Conductive Anode for Cathodic Protection of Reinforced Concrete,” J. Test. Eval., vol. 45, no. 5, pp. 1777–1786, 2017.
A. Mostafaei and F. Nasirpouri, “Epoxy/polyaniline–ZnO nanorods hybrid nanocomposite coatings: Synthesis, characterization and corrosion protection performance of conducting paints,” Prog. Org. Coat., vol. 77, no. 1, pp. 146–159, 2014.
Y. Xu, W. Zhang, W. Yu, J. Ding, and H. Sun, “Polythiophene-sensitized TiO₂ nanotube arrays for photo-generated cathodic protection of 304 stainless steel,” J. Mater. Sci., vol. 56, pp. 4470–4483, 2021.
W. Li, J. Zuo, J. Xu, Y. Li, H. Zheng, and H. Yang, “Cathodic protection of reinforced concrete facilitated by using CNT-CF/cement-based auxiliary anode,” Fuller. Nanotub. Carbon Nanostruct., vol. 32, no. 6, pp. 595–602, 2024.
J. Li et al., “Enhancing cathodic protection and barrier properties of zinc-rich epoxy coatings with mesoporous Ti₄O₇ additive,” Prog. Org. Coat., vol. 187, p. 108163, 2024.
D. T. Oloruntoba, O. S. Adesina, O. O. Sanyaolu, P. P. Ikubanni, B. O. Iwarere, and A. A. Adediran, “Development of Aluminum Base Anode for Cathodic Protection of Steel,” Chem. Afr., pp. 1–14, 2024.
X. Zhou et al., “Low efficiency of cathodic protection in marine tidal corrosion of X80 steel in the presence of Pseudomonas sp.,” Bioelectrochemistry, vol. 157, p. 108656, 2024.
A. B. Abdel-Aziz, F. E. T. Heakal, R. M. El Nashar, and I. M. Ghayad, “Green synthesis and characterization of binary, ternary, and quaternary Ti/MMO anodes for chlorine and oxygen evolution reactions,” Sci. Rep., vol. 14, no. 1, p. 9821, 2024.
M. A. Zavareh, A. A. D. M. Sarhan, R. Karimzadeh, R. Singh, and K. Singh, “Analysis of corrosion protection behavior of Al₂O₃-TiO₂ oxide ceramic coating on carbon steel pipes for the petroleum industry,” Ceram. Int., vol. 44, no. 6, pp. 5967–5975, 2018.
A. U. Ammar et al., “Electrochemical study of polymer and ceramic-based nanocomposite coatings for corrosion protection of cast iron pipeline,” Mater., vol. 11, no. 3, p. 332, 2018.
X. T. Wang et al., “CdTe/TiO₂ nanocomposite material for photogenerated cathodic protection of 304 stainless steels,” Mater. Sci. Eng. B, vol. 208, pp. 22–28, 2016.
S. Cui, X. Yin, Q. Yu, Y. Liu, D. Wang, and F. Zhou, “Polypyrrole nanowire/TiO₂ nanotube nanocomposites as photoanodes for photocathodic protection of Ti substrate and 304 stainless steel under visible light,” Corros. Sci., vol. 98, pp. 471-477, 2015.
H. Hayatdavoudi and M. Rahsepar, “A mechanistic study of the enhanced cathodic protection performance of graphene-reinforced zinc rich nanocomposite coating for corrosion protection of carbon steel substrate,” J. Alloy. Compd., vol. 727, pp. 1148-1156, 2017.
Y. Cubides and H. Castaneda, “Corrosion protection mechanisms of carbon nanotube and zinc-rich epoxy primers on carbon steel in simulated concrete pore solutions in the presence of chloride ions,” Corros. Sci., vol. 109, pp. 145–161, 2016.
Y. Cubides and H. Castaneda, “Corrosion protection mechanisms of carbon nanotube and zinc-rich epoxy primers on carbon steel in simulated concrete pore solutions in the presence of chloride ions,” Corrosion Science, vol. 109, pp. 145-161, 2016.
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Madaniyyu Sulaiman Yahaya, Kapil Nahar, Dinesh Kumar, Habib Muhammad Usman, Abdulhaq Saleh Gambo, Tijjani AMINU, Mustapha Sulaiman
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.