Prototype Design of Air Quality Control Blower at PT SINAR INDOGREEN KENCANA Production Area
DOI:
https://doi.org/10.12928/biste.v6i1.10122Keywords:
Automatic Blower, GP2Y1010AU0F Sensor, DHT22 Sensor, ESP8266, Arduino UNOAbstract
PT SINAR INDOGREEN KENCANA is a company that produces AAC (Autoclave Aerated Concrete) lightweight bricks, the existence of a limestone grinding machine (Mill MTW) into lime powder and maturation of raw materials with the steam process of the autoclave machine, as well as the occurrence of rain that disrupts air circulation in the production area, causing a lot of dust and hot water vapor from the machining process to enter the production area, thus disrupting the performance of employees. This research aims to design a prototype blower for air quality control in the production area of PT SINAR INDOGREEN KENCANA. Where this system is designed to control and monitor dust and temperature levels, utilizing ESP8266 as a monitoring unit and Arduino UNO as a controller, with Blynk integration as a user interface. In operation, ESP8266 monitors dust levels and temperature through the I2C LCD, turning on the blower to suck dust and water vapor from the remaining hot production. Arduino UNO as a link between the GP2Y1010AU0F sensor for dust detection and the DHT22 sensor for temperature detection, sends data on dust levels and temperature to ESP8266. Through the BLYNK application, users can find out dust levels, temperature, and whether the blower is on or off. The application of this system obtained the result that the whole system provides an integrated and effective solution for controlling air quality in the production area of PT SINAR INDOGREEN KENCANA.
References
J. Presnal, H. Houston and G. Maberry, "The Electrical Safety Program and the Value in Parterning with Health & Safety Professionals," 2020 IEEE IAS Electrical Safety Workshop (ESW), pp. 1-7, 2020, https://doi.org/10.1109/ESW42757.2020.9188320.
R. Hojo, T. Sujino, C. Bördlein, Y. Koremura, and S. Shimizu, “Risk distribution method from worker behavior measurement using Behavior-Based Safety procedure,” in 2021 IEEE 3rd Global Conference on Life Sciences and Technologies (LifeTech), pp. 35–36, 2021, https://doi.org/10.1109/LifeTech52111.2021.9391969.
G. Zhang, Y. Wang, B. Mu, and T. Wang, “Big Data and Safety Management Methods: The Reduction Model of Hot Work Number,” in 2019 IEEE 4th International Conference on Big Data Analytics (ICBDA), pp. 140–143, 2019, https://doi.org/10.1109/ICBDA.2019.8713251.
G. Jin, W. Yan, C. Ma, and L. Guan, “Post-Processing Algorithm for Workplace Safety Risk Monitoring System Based on Deep-Learning Models,” in 2023 7th International Conference on System Reliability and Safety (ICSRS), pp. 362–370, 2023, https://doi.org/10.1109/ICSRS59833.2023.10381040.
H. L. I. I. Floyd, “Through the Lens of Systems Safety: The Limitations of a Compliance-Based Safety Culture and Opportunities to Reduce Electrical Injuries,” in 2023 IEEE IAS Electrical Safety Workshop (ESW), pp. 34–36, 2023, https://doi.org/10.1109/ESW49992.2023.10188267.
L. Fang, X. Shi, B. Mei, and Y. Liu, “Design and Development of Industrial Safety APPs,” in 2022 IEEE 2nd International Conference on Electronic Technology, Communication and Information (ICETCI), pp. 526–530, 2022, https://doi.org/10.1109/ICETCI55101.2022.9832162.
J. Sun, L. Cheng, Y. Yu, and X. Wang, “Research on the Problems of Enterprise Safety Production Based on Alarm Data of Safety Information Platform in Chemical Industrial Park,” in 2021 International Conference on Education, Information Management and Service Science (EIMSS), pp. 179–183, 2021, https://doi.org/10.1109/EIMSS53851.2021.00047.
O. A. Loktionov, N. V Vasileva, and O. E. Kondrateva, “Impact of the “well-being” system indicators on the safety culture level and health of power industry employees,” in 2023 5th International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE), pp. 1–5, 2023, https://doi.org/10.1109/R10-HTC.2017.8289064.
R S. Chanthakit and C. Rattanapoka, "MQTT Based Air Quality Monitoring System using Node MCU and Node-RED," 2018 Seventh ICT International Student Project Conference (ICT-ISPC), pp. 1-5, 2018, https://doi.org/10.1109/ICT-ISPC.2018.8523891.
R. Hojo, C. Bördlein, K. Hamajima, S. Umezaki, and S. Shimizu, “For a Quantitative Evaluation of Risk Assessment -Behavior-based Safety,” in 2020 IEEE 2nd Global Conference on Life Sciences and Technologies (LifeTech), pp. 378–380, 2020, https://doi.org/10.1109/LifeTech48969.2020.1570619864.
N. L. Datta, A. Tabassum, J. Bhavani, K. Y. R. Kumar, R. V. H. Prasad, and A. R. Raja, “Design And Development of Dust Detection and Filtering System,” in 2023 9th International Conference on Advanced Computing and Communication Systems (ICACCS), pp. 739–743, 2023, https://doi.org/10.1109/ICACCS57279.2023.10112892.
O. O. Akinwole, “Design, simulation and implementation of an Arduino microcontroller-based automatic water level controller with I2C LCD,” International Journal of Advances in Applied Sciences, vol. 9, no. 2, pp. 77–84, 2020, https://doi.org/10.11591/ijaas.v9.i2.pp77-84.
I. Sulistiyowati, S. Soedibyo, M. Ashari, A. L. Setya Budi and D. R. Anggara Fitrah, "Fuel Cell Penetration Characteristics on Standalone Photovoltaic with Hybrid Energy Storage System," 2022 11th Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS), pp. 40-44, 2022, https://doi.org/10.1109/EECCIS54468.2022.9902894.
V. A. Safitri, L. Sari, and R. R. Gamayuni, “Research and Development, Environmental Investments, to Eco-Efficiency, and Firm Value,” The Indonesian Journal of Accounting Research, vol. 22, no. 03, pp. 377–396, 2019, https://doi.org/10.33312/ijar.446.
P. Pegkas, C. Staikouras, and C. Tsamadias, “Does research and development expenditure impact innovation? Evidence from the European Union countries,” Journal of Policy Modeling, vol. 41, no. 5, pp. 1005-1025, 2019, https://doi.org/10.1016/j.jpolmod.2019.07.001.
Lee, H. (2021). Changes in workplace practices during the COVID-19 pandemic: the roles of emotion, psychological safety and organisation support. Journal of Organizational Effectiveness: People and Performance, 8(1), 97-128, 2021, https://doi.org/10.1108/JOEPP-06-2020-0104.
M. A. Juliyanto, I. Sulistiyowati, A. Ahfas, “ Design of Turbine Aerator with Remote Control and Internet of Things (IoT)-Based Water pH Monitoring,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 5, no. 1, pp. 156-166, 2023, https://doi.org/10.12928/biste.v5i1.7863.
Wu, D., Cui, D., Zhou, M., & Ying, Y. (2022). Information perception in modern poultry farming: A review. Computers and Electronics in Agriculture, 199, 107131, 2022, https://doi.org/10.1016/j.compag.2022.107131.
I. Anshory, D. Hadidjaja, and I. Sulistiyowati, “Measurement, Modeling, and Optimization Speed Control of BLDC Motor Using Fuzzy-PSO Based Algorithm,” Journal of Electrical Technology UMY, vol. 5, no. 1, pp. 17–25, 2021, https://doi.org/10.18196/jet.v5i1.12113.
S. C. S. Yanti and I. Sulistiyowati, “An Inventory Tool for Receiving Practicum Report Based on IoT by Using ESP32-CAM and UV Sterilizer: A Case Study at Muhammadiyah University of Sidoarjo,” Journal of Electrical Technology UMY, vol. 6, no. 1, pp. 49-56, 2022, https://doi.org/10.18196/jet.v6i1.14607.
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Mufit Yogie Prayudha, Indah Sulistiyowati, Dwi Hadidjaja Rasjid Saputra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.