Development of Learning Media for Motorcycle Chassis Training Kit

Nurcholish Arifin Handoyono

Abstract


This research aims to determine the development process and the feasibility of learning media for motorcycle chassis training kit at SMK Muhammadiyah 1 Bambanglipuro. The type of research used is R&D. The research subjects were 32 students of class X TBSM SMK Muhammadiyah 1 Bambanglipuro. The data collection instruments used observation and questionnaires. The data analysis technique used the evaluation criteria analysis to determine the feasibility of learning media. The results showed that: (1) The development process went through several stages, namely: (a) problem background; (b) problem identification; (c) development ideas; (d) pre-production stage (tools and materials); (e) production stage; (f) product development; (g) validation and revision; (h) feasibility test; and (i) wearable products; and; (2) Learning media for motorcycle chassis training kit are categorized as very suitable for use in learning with the results of validation of media experts by 90%, material experts by 95%, small group trial of 85.24%, and large group trial of 83.94%.

Keywords


Learning Media; Training Kit; Chasis; Motorcycle

Full Text:

PDF

References


Azhar, A. (2011). Media Pembelajaran. In Media Pembelajaran. Jakarta: Raja Grafindo Persada.

Febriani, P. S., & Sarino, A. (2017). Dampak Cara Belajar dan Fasilitas Belajar dalam Meningkatan Prestasi Belajar Siswa Sekolah Menengah Kejuruan. Jurnal MANAJERIAL.

Handoyono, N. A., & Rabiman, R. (2020). Development of android-based learning application in EFI materials for vocational schools. Journal of Physics: Conference Series.

Handoyono, Nurcholish Arifin. (2019). Development of Media Trainer Kit Charging System to Improve Effectiveness Automotive Electrical Practices. Journal of Mechanical Engineering Education.

Handoyono, Nurcholish Arifin, & Arifin, Z. (2016). Pengaruh Inquiry Learning dan Problem-Based Learning terhadap Hasil Belajar Pkkr Ditinjau dari Motivasi Belajar. Jurnal Pendidikan Vokasi.

Handoyono, Nurcholish Arifin, & Hadi, S. (2018). Pengembangan modul pembuatan bodi kendaraan dari fiberglass untuk mendukung Perkuliahan cat dan bodi Kendaraan. Taman Vokasi, 6(1), 36–44.

Kurt, S. (2017). ADDIE Model: Instructional Design.

Maryanti, N., & Apriana, D. (2019). Kompetensi Siswa SMK dalam Menyongsong Revolusi Industri 4.0. Prosiding Seminar Nasional Pendidikan Program Pascasarjana Universitas PGRI Palembang.

PH, S. P. (2013). Pengembangan SMK Model untuk Masa Depan. Jurnal Cakrawala Pendidikan, 32(1), 14–26.

Smaldino, S. E., Lowther, D. L., & Mims, C. (2015). Instructional Media and Technology for Learning. In International Journal of Distributed and Parallel Systems (11th ed.).

Sudarsono, B. (2020). Pengembangan alat tambal ban portable sebagai media pembelajaran siswa SMK. TAMAN VOKASI. https://doi.org/10.30738/jtv.v8i1.7627

Sugiyono. (2014). Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.

Sunarto, S., & Supriadi, D. (2019). Efektivitas Implementasi Model Pembelajaran SMK dalam Memenuhi Tantangan Revolusi Industri 4.0. TAMAN VOKASI.




DOI: https://doi.org/10.12928/joves.v4i1.3413

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Universitas Ahmad Dahlan

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



Journal of Vocational Education Studies (JOVES)
e-ISSN: 2614-7475 | p-ISSN: 2614-7483
Organized by: Master of Vocational Education, Universitas Ahmad Dahlan
Published by: Universitas Ahmad Dahlan
Website: http://journal2.uad.ac.id/index.php/joves
Email: joves@mpv.uad.ac.id
 

View JOVES Stats

 

Lisensi Creative Commons

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.